Of all patients in a hospital environment, trauma patients may be particularly at risk for developing (device-related) pressure ulcers (PUs), because of their traumatic injuries, immobility, and exposure to immobilizing and medical devices. Studies on device-related PUs are scarce. With this study, the incidence and characteristics of PUs and the proportion of PUs that are related to devices in adult trauma patients with suspected spinal injury were described. From January–December 2013, 254 trauma patients were visited every 2 days for skin assessment. The overall incidence of PUs was 28⋅3% (n = 72/254 patients). The incidence of device-related PUs was 20⋅1% (n = 51), and 13% (n = 33) developed solely device-related PUs. We observed 145 PUs in total of which 60⋅7% were related to devices (88/145). Device-related PUs were detected 16 different locations on the front and back of the body. These results show that the incidence of PUs and the proportion of device-related PUs is very high in trauma patients
DOCUMENT
Introduction: There are two surgical approaches to reconstruct a pressure ulcer (PU): one-stage reconstruction or two-stage reconstruction. One stage reconstruction consists of surgical debridement and flap reconstruction during one operation. Two-stage surgery consist of a surgical debridement and a final reconstruction in two different sessions, with approximately six weeks between both sessions. Objective: The aim of this study was to compare the results of single stage surgery and two-stage surgery on the PU recurrence rate and other important post operative complications. Method: A retrospective, comparative study in Spinal Cord Injured (SCI) individuals with a single- or two stage surgical reconstruction between 2005 and 2016 was designed. A total of 81 records were included for analysis. Results: The primary outcome, the difference in occurrence of a recurrent PU in the reconstructed area (33.3% versus 31.6%), is not statistically significant between one-and two-stages reconstruction. Also, the mean duration to develop a recurrent PU between both surgical reconstructions is not statistically significant. Other surgical complications in the reconstructed area like wound hematoma, hemorrhage, seroma or (partial) flap failure did not differ significantly between both groups, apart and in total. We calculated the additional costs in case of a two-stage approach compared with a single-stage reconstruction at EUR 16,362. Conclusions: There are no statistical significant differences in PU recurrence rate or other post operative complications between SCI patients who have undergone one- or two stage PU reconstructive surgery. The most obvious choice for a one-stage approach in case of PU reconstructive surgery has great positive implications for the patient, family, health care providers and the health care system.
LINK
Purpose: Pressure ulcers are a high cost, high volume issue for health and medical care providers, having a detrimental effect on patients and relatives. Pressure ulcer prevention is widely covered in the literature, but little has been published regarding the risk to patients in the radiographical setting. Thisreview of the current literature is to identify findings relevant to radiographical context.Methods: Literature searching was performed using Science Direct and Medline databases. The search was limited to articles published in the last ten years to remain current and excluded studies containing participants less than 17 years of age. In total 14 studies were acquired; three were excluded as they were not relevant. The remaining 11 studies were compared and reviewed.Discussion: Eight of the studies used ‘healthy’ participants and three used symptomatic participants. Nine studies explored interface pressure with a range of pressure mat technologies, two studies measured shear (MRI finite element modelling, and a non-invasive instrument), and one looked at blood flow and haemoglobin oxygenation. A range of surfaces were considered from trauma, nursing and surgical backgrounds for their ability to reduce pressure including standard mattresses, high specification mattresses, rigid and soft layer spine boards, various overlays (gel, air filled, foam).Conclusion: The current literature is not appropriate for the radiographic patient and cannot be extrapolated to a radiologic context. Sufficient evidence is presented in this review to support the need for further work specific to radiography in order to minimise the development of PU in at risk patients.
DOCUMENT
Introduction: Pressure ulcers are a high cost, high volume issue for health and medical care providers, affecting patients’ recovery and psychological wellbeing. The current research of support surfaces on pressure as a risk factor in the development of pressure ulcers is not relevant to the specialised, controlled environment of the radiological setting. Method: 38 healthy participants aged 19-51 were placed supine on two different imaging surfaces. The XSENSOR pressure mapping system was used to measure the interface pressure. Data was acquired over a time of 20 minutes preceded by 6 minutes settling time to reduce measurement error. Qualitative information regarding participants’ opinion on pain and comfort was recorded using a questionnaire. Data analysis was performed using SPSS 22. Results: Data was collected from 30 participants aged 19 to 51 (mean 25.77, SD 7.72), BMI from 18.7 to 33.6 (mean 24.12, SD 3.29), for two surfaces, following eight participant exclusions due to technical faults. Total average pressure, average pressure for jeopardy areas (head, sacrum & heels) and peak pressure for jeopardy areas were calculated as interface pressure in mmHg. Qualitative data showed that a significant difference in experiences of comfort and pain was found in the jeopardy areas (P<0.05) between the two surfaces. Conclusion: A significant difference is seen in average pressure between the two surfaces. Pain and comfort data also show a significant difference between the surfaces, both findings support the proposal for further investigation into the effects of radiological surfaces as a risk factor for the formation of pressure ulcers.
DOCUMENT
Background: The transformation in global demography and the shortage of health care workers require innovation and efficiency in the field of health care. Digital technology can help improve the efficiency of health care. The Mercury Advance SMARTcare solution is an example of digital technology. The system is connected to a hybrid mattress and is able to detect patient movement, based on which the air pump either starts automatically or sends a notification to the app. Barriers to the adoption of the system are unknown, and it is unclear if the solution will be able to support health care workers in their work. Objective: This study aims to gain insight into health care workers’ expectations of factors that could either hamper or support the adoption of the Mercury Advance SMARTcare unit connected to a Mercury Advance mattress to help prevent patients from developing pressure injuries in hospitals and long-term care facilities. Methods: We conducted a generic qualitative study from February to December 2022. Interviews were conducted, and a focus group was established using an interview guide of health care workers from both the United Kingdom and the Netherlands. Thematic analysis was performed by 2 independent researchers. Results: A total of 14 participants took part in the study: 6 (43%) participants joined the focus group, and 8 (57%) participants took part in the individual interviews. We identified 13 factors based on four themes: (1) factors specifically related to SMARTresponse, (2) vision on innovation, (3) match with health care activities, and (4) materials and resources involved. Signaling function, SMARTresponse as prevention, patient category, representatives, and implementation strategy were identified as facilitators. Perception of patient repositioning, accessibility to pressure injury aids, and connectivity were identified as barriers. Conclusions: Several conditions must be met to enhance the adoption of the Mercury Advance SMARTcare solution, including the engagement of representatives during training and a reliable wireless network. The identified factors can be used to facilitate the implementation process. JMIR Nursing 2024;7:e47992
DOCUMENT
Objective. In this study an experimental set-up for measuring skin microvascular responses of the footsole to changes in externally applied pressure was analysed. Design. A clinical study. Skin microvascular blood flow was measured in healthy volunteers, during and after external mechanical pressure of different magnitudes. Background. During standing and walking the footsole is commonly exposed to high static and dynamic mechanical pressure, resulting in changes in the microcirculation of the footsole. In diabetic patients a disturbed interaction between externally applied pressure and skin microvascular response seems to be involved in the development of a foot ulcer. Methods. Eleven volunteers participated in the study. Static loads were applied to the heel part of the footsole with the person in a supine position. Contact pressure and skin blood flux, based on the laser Doppler technique, were simultaneously monitored. The pressure used was varied in five discrete steps between 10 and 160 kPa and applied during a period of 5 min each. The microcirculation was measured during as well as after pressure loading. Results. Pressures of 40 kPa and higher do stop the blood flow in the skin micro-circulation. Releasing the applied pressure resulted in a hyperaemic response. This response appears to increase in amplitude at increasing pressures up to 800% of the baseline laser Doppler fluxmetry level. Beyond a pressure level of 80 kPa the hyperaemic response seems not to be influenced by the pressure level. The time needed to achieve the maximal laser Doppler fluxmetry level decreased when the pressure was raised from 10 to 80 kPa, but increased again when higher pressures were applied (P = 0.051). An intra-individual variation of 11-50% was observed for the parameters describing the blood flux before, during, and after pressure application. Conclusion. Simultaneously measuring changes in contact pressure and laser Doppler flux of the footsole is a useful method to study the interaction of external mechanical pressure and skin microvascular reactions. Pressures above 40 kPa stop skin microvascular blood flow. Releasing the applied pressure results in a hyperaemic response, which increases when the applied pressure increases from 40 to 80 kPa. Higher pressures do not influence the amplitude in skin microvascular response, but result in a longer delay to maximal hyperaemia.
DOCUMENT
Objectives To explore the influence of risk factors present at Emergency Department admission on pressure ulcer development in trauma patients with suspected spinal injury, admitted to the hospital for evaluation and treatment of acute traumatic injuries. Design Prospective cohort study setting level one trauma center in the Netherlands participants adult trauma patients transported to the Emergency Department on a backboard, with extrication collar and headblocks and admitted to the hospital for treatment or evaluation of their injuries. Methods Between January and December 2013, 254 trauma patients were included. The following dependent variables were collected: Age, Skin color and Body Mass Index, and Time in Emergency Department, Injury Severity Score, Mean Arterial Pressure, hemoglobin level, Glasgow Coma Score, and admission ward after Emergency Department. Results Pressure ulcer development during admission was associated with a higher age (p 0.00, OR 1.05) and a lower Glasgow Coma Scale score (p 0.00, OR 1.21) and higher Injury Severity Scores (p 0.03, OR 1.05). Extra nutrition decreases the probability of PU development during admission (p 0.04, OR 0.20). Pressure ulcer development within the first 48 h of admission was positively associated with a higher age (p 0.01, OR 1.03) and a lower Glasgow Coma Scale score (p 0.01, OR 1.16). The proportion of patients admitted to the Intensive Care Unit and Medium Care Unit was higher in patients with pressure ulcers. Conclusions The pressure ulcer risk during admission is high in patients with an increased age, lower Glasgow Coma Scale and higher Injury Severity Score in the Emergency Department. Pressure ulcer risk should be assessed in the Emergency Department to apply preventive interventions in time.
LINK
Abstract—Pressure ulcers (PUs) are highly prevalent in people with spinal cord injury (SCI). Electrical stimulation (ES) activates muscles and might reduce risk factors. Our objectives were to study and compare the effects of two duty cycles during 3 h of ES-induced gluteal and hamstring activation on interface pressure distribution in sitting individuals with SCI and study the usability of a newly developed electrode garment (ES shorts). Ten individuals with SCI participated in this study, in which two ES protocols with different duty cycles (1:1 s vs 1:4 s on-off) were applied in counterbalanced order using a custom-made garment with built-in electrodes. Outcome variables included interface pressure of the ischial tuberosities (ITs) and pressure gradient. A questionnaire was used to determine usability of the ES shorts. In both protocols, ES caused a significant decrease in average IT pressure compared with rest (no ES); on average, 35% for protocol 1:4 and 13% for protocol 1:1. The ES on-off duty cycle of protocol 1:4 showed less muscle fatigue. In general, participants scored the usability of the ES shorts as satisfactory. In this study, the application of ES resulted in a significant decrease in IT pressure. The ES on-off duty cycle of 1:4 s is recommended because of the less fatiguing effect. ES of the hamstrings and gluteal muscles might be a promising method in preventing PUs, but further study is needed.
DOCUMENT
Background: Collar-related pressure ulcers (CRPU) are a problem in trauma patients with a suspicion of cervical cord injury patients. Indentation marks (IM), skin temperature (Tsk) and comfort could play a role in the development of CRPU. Two comparable cervical collars are the Stifneck® and Philadelphia®. However, the differences between them remain unclear. Aim: To determine and compare occurrence and severity of IM, Tsk and comfort of the Stifneck® and Philadelphia® in immobilized healthy adults. Methods: This single-blinded randomized controlled trial compared two groups of immobilized participants in supine position for 20 min. Results: All participants (n = 60) generated IM in at least one location in the observed area. Total occurrence was higher in the Stifneck®-group (n = 95 versus n = 69; p = .002). Tsk increased significantly with 1.0 °C in the Stifneck®-group and 1.3 °C in the Philadelphia®-group (p = .024). Comfort was rated 3 on a scale of 5 (p = .506). Conclusion: The occurrence of IM in both groups was high. In comparison to the Stifneck®, fewer and less severe IM were observed from the Philadelphia®. The Tsk increased significantly with both collars; however, no clinical difference in increase of Tsk between them was found. The results emphasize the need for a better design of cervical collars regarding CRPU.
LINK
Background Several footwear design characteristics are known to have detrimental effects on the foot. However, one characteristic that has received relatively little attention is the point where the sole flexes in the sagittal plane. Several footwear assessment forms assume that this should ideally be located directly under the metarsophalangeal joints (MTPJs), but this has not been directly evaluated. The aim of this study was therefore to assess the influence on plantar loading of different locations of the shoe sole flexion point. Method Twenty-one asymptomatic females with normal foot posture participated. Standardised shoes were incised directly underneath the metatarsophalangeal joints, proximal to the MTPJs or underneath the midfoot. The participants walked in a randomised sequence of the three shoes whilst plantar loading patterns were obtained using the Pedar® in-shoe pressure measurement system. The foot was divided into nine anatomically important masks, and peak pressure (PP), contact time (CT) and pressure time integral (PTI) were determined. A ratio of PP and PTI between MTPJ2-3/MTPJ1 was also calculated. Results Wearing the shoe with the sole flexion point located proximal to the MTPJs resulted in increased PP under MTPJ 4–5 (6.2%) and decreased PP under the medial midfoot compared to the sub-MTPJ flexion point (−8.4%). Wearing the shoe with the sole flexion point located under the midfoot resulted in decreased PP, CT and PTI in the medial and lateral hindfoot (PP: −4.2% and −5.1%, CT: −3.4% and −6.6%, PTI: −6.9% and −5.7%) and medial midfoot (PP: −5.9% CT: −2.9% PTI: −12.2%) compared to the other two shoes. Conclusion The findings of this study indicate that the location of the sole flexion point of the shoe influences plantar loading patterns during gait. Specifically, shoes with a sole flexion point located under the midfoot significantly decrease the magnitude and duration of loading under the midfoot and hindfoot, which may be indicative of an earlier heel lift.
LINK
