The Smart Current Limiter is a switching DC to DC converter that provides a digitally pre-set input current control for inrush limiting and power management. Being able to digitally adjust the current level in combination with external feedback can be used for control systems like temperature control in high power DC appliances. Traditionally inrush current limiting is done using a passive resistance whose resistance changes depending on the current level. Bypassing this inrush limiting resister with a Mosfet improves efficiency and controllability, but footprint and losses remain large. A switched current mode controlled inrush limiter can limit inrush currents and even control the amount of current passing to the application. This enables power management and inrush current limitation in a single device. To reduce footprint and costs a balance between losses and cost-price on one side and electromagnetic interference on the other side is sought and an optimum switching frequency is chosen. To reduce cost and copper usage, switching happens on a high frequency of 300kHz. This increases the switching losses but greatly reduces the inductor size and cost compared to switching supplies running on lower frequencies. Additional filter circuits like snubbers are necessary to keep the control signals and therefore the output current stable.
DOCUMENT
The application of DC grids is gaining more attention in office applications. Especially since powering an office desk would not require a high power connection to the main AC grid but could be made sustainable using solar power and battery storage. This would result in fewer converters and further advanced grid utilization. In this paper, a sustainable desk power application is described that can be used for powering typical office appliances such as computers, lighting, and telephones. The desk will be powered by a solar panel and has a battery for energy storage. The applied DC grid includes droop control for power management and can either operate stand-alone or connected to other DC-desks to create a meshed-grid system. A dynamic DC nano-grid is made using multiple self-developed half-bridge circuit boards controlled by microcontrollers. This grid is monitored and controlled using a lightweight network protocol, allowing for online integration. Droop control is used to create dynamic power management, allowing automated control for power consumption and production. Digital control is used to regulate the power flow, and drive other applications, including batteries and solar panels. The practical demonstrative setup is a small-sized desktop with applications built into it, such as a lamp, wireless charging pad, and laptop charge point for devices up to 45W. User control is added in the form of an interactive remote wireless touch panel and power consumption is monitored and stored in the cloud. The paper includes a description of technical implementation as well as power consumption measurements.
DOCUMENT
At the department of electrical and electronic engineering of Fontys University of Applied Sciences we are defining a real-life learning context for our students, where the crossover with regional healthcare companies and institutes is maximized. Our innovative educational step is based on openly sharing electronic designs for health related measurement modalities as developed by our students. Because we develop relevant reference designs, the cross fertilization with society is large and so the learning cycle is short.
DOCUMENT
Biodiversity, including entire habitats and ecosystems, is recognized to be of great social and economic value. Conserving biodiversity has therefore become a task of international NGO’s as well as grass-roots organisations. The ‘classical’ model of conservation has been characterised by creation of designated nature areas to allow biodiversity to recover from the effects of human activities. Typically, such areas prohibit entry other than through commercial ecotourism or necessary monitoring activities, but also often involve commodification nature. This classical conservation model has been criticized for limiting valuation of nature to its commercial worth and for being insensitive to local communities. Simultaneously, ‘new conservation’ approaches have emerged. Propagating openness of conservation approaches, ‘new conservation’ has counteracted the calls for strict measures of biodiversity protection as the only means of protecting biodiversity. In turn, the ’new conservation’ was criticised for being inadequate in protecting those species that are not instrumental for human welfare. The aim of this article is to inquire whether sustainable future for non-humans can be achieved based on commodification of nature and/or upon open approaches to conservation. It is argued that while economic development does not necessarily lead to greater environmental protection, strict regulation combined with economic interests can be effective. Thus, economic approaches by mainstream conservation institutions cannot be easily dismissed. However, ‘new conservation’ can also be useful in opening up alternatives, such as care-based and spiritual approaches to valuation of nature. Complementary to market-based approaches to conservation, alternative ontologies of the human development as empathic beings embedded in intimate ethical relations with non-humans are proposed. https://www.linkedin.com/in/helenkopnina/
DOCUMENT
Electrification of transportation, communication, working and living continues worldwide. Televisions, telephones, servers are an important part of everyday life. These loads and most sustainable sources as well, have one thing in common: Direct Current. The Dutch research and educational programme ‘DC – road to its full potential’ studies the impact of feeding these appliances from a DC grid. An improvement in energy efficiency is expected, other benefits are unknown and practical considerations are needed to come to a proper comparison with an AC grid. This paper starts with a brief introduction of the programme and its first stages. These stages encompass firstly the commissioning, selection and implementation of a safe and user friendly testing facility, to compare performance of domestic appliances when powered with AC and DC. Secondly, the relationship between the DC-testing facility and existing modeling and simulation assignments is explained. Thirdly, first results are discussed in a broad sense. An improved energy efficiency of 3% to 5% is already demonstrated for domestic appliances. That opens up questions for the performance of a domestic DC system as a whole. The paper then ends with proposed minor changes in the programme and guidelines for future projects. These changes encompass further studying of domestic appliances for product-development purposes, leaving less means for new and costly high-power testing facilities. Possible gains are 1) material and component savings 2) simpler and cheaper exteriors 3) stable and safe in-house infrastructure 4) whilst combined with local sustainable generation. That is the road ahead. 10.1109/DUE.2014.6827758
DOCUMENT
Droop control is used for power management in DC grids. Based on the level of the DC grid voltage, the amount of power regulated to or from the appliance is regulated such, that power management is possible. The Universal 4 Leg is a laboratory setup for studying the functionality of a grid manager for power management. It has four independent outputs that can be regulated with pulse width modulation to control the power flow between the DC grid and for example, a rechargeable battery, solar panel or any passive load like lighting or heating.
DOCUMENT
Public lighting’s primary purpose is nighttime visibility for security and safety. How to meet so many requirements of so many stakeholders? The key to developing a good plan is to relate lighting to functions of public spaces, because street lighting is more than a technical requirement, a security need, or a design element. It can be thought of and utilized in terms of how the type, placement, and wattage affect how a street is perceived and used. With present-day used street lighting systems however, flexibility is expensive, as is maintenance and energy consumption. A new solution is to use LED lighting with a Direct Current power system. Advantages are a decrease in: energy conversions; material use; amount of switch- boxes; components; labour costs and environmental comfort. The overall implementation of LED and DC will result in better control and efficient maintenance due to integrated bidirectional communication. A challenge is the relatively high investment for these new solutions. Another challenge; DC is not a standard yet in rules and regulations. In the paper the transition to direct current public lighting system will be described with all the pros and cons. A new concept of public ownership, to overcome financial challenges will be discussed. M Hulsebosch1, P Willigenburg2 ,J Woudstra2 and B Groenewald3 1CityTec b.v., Alblasserdam, The Netherlands 2The Hague University of Applied Sciences, The Hague, The Netherlands 3Cape Peninsula University of Technology, Cape Town, South Africa 10.1109/ICUE.2014.6904186
DOCUMENT
A welcome policy can be embedded in a municipal authority organisation in a number of different ways. Each has its own strengths and weaknesses. To be effective, the local policy makers must be clear on how they hope to make use of the welcome policy and how this will benefit or suffer from different organisational structures. No one ‘ideal’ structure will ‘fit’ all municipal situations in Europe. However, to be aware of the strengths and weaknesses of the organisational structure that most closely resembles the local situation can increase the chances of successful policy implementation.
DOCUMENT
Digital surveillance technologies using artificial intelligence (AI) tools such as computer vision and facial recognition are becoming cheaper and easier to integrate into governance practices worldwide. Morocco serves as an example of how such technologies are becoming key tools of governance in authoritarian contexts. Based on qualitative fieldwork including semi-structured interviews, observation, and extensive desk reviews, this chapter focusses on the role played by AI-enhanced technology in urban surveillance and the control of migration between the Moroccan–Spanish borders. Two cross-cutting issues emerge: first, while international donors provide funding for urban and border surveillance projects, their role in enforcing transparency mechanisms in their implementation remains limited; second, Morocco’s existing legal framework hinders any kind of public oversight. Video surveillance is treated as the sole prerogative of the security apparatus, and so far public actors have avoided to engage directly with the topic. The lack of institutional oversight and public debate on the matter raise serious concerns on the extent to which the deployment of such technologies affects citizens’ rights. AI-enhanced surveillance is thus an intrinsically transnational challenge in which private interests of economic gain and public interests of national security collide with citizens’ human rights across the Global North/Global South divide.
MULTIFILE
Conference proceedings International Symposium on Intelligent Manufacturing Environments
DOCUMENT
