RFID technology is a promising technology currently finding its way into the field of customer interaction strategy, supply chain accuracy and inventory management. Primarily, RFID tags are seen as substitutes of traditional barcodes, yet they can add a lot of value and functionality. Where barcodes require a scanning device to be placed directly in front of the tag to be read, RFID tag readers are able to scan all tags that are in the proximity of the scanner . The next difference is that whereas barcodes usually are the same for all articles of the of the same type (i.e. a jar of peanut butter of brand x), RFID tags will be unique for each individual product occurrence. This opens up the possibility of tracking the entire history of a specific occurrence of a product. Moreover, due to the nature of the scanning technology, it suddenly becomes achievable for manufacturers to track individual products through all stages of production and base inventory management and front office planning on real-time data at item level from production facilities.
DOCUMENT
Determineren is een belangrijk onderdeel van Integrated Pest Management. Als we niet weten om welk dier het gaat, wetten we niet hoe het leeft, of het schadelijk is en wat we eraan kunnen doen. De meeste determinaties worden aan de hand van uiterlijke kenmerken gedaan, maar er is nog een veelbelovende nieuwe methode: DNA.
MULTIFILE
When using autonomous reconfigurable manufacturing system, that offers generic services, there is the possibility to dynamically manufacture a range of products using the same manufacturing equipment. Opportunities are created to optimally scale the production using reconfiguration means and automatically manufacture small amounts of unique or highly customizable products. Basically the result is a short time to market for new products. This paper discusses the problems that arise when manufacturing systems are reconfigured and the impact of this action on the entire system. The proposed software architecture and tooling makes it possible to quickly reconfigure a system without interference to other system, and shows how the reconfigured hardware can be controlled without the need to reprogram the software. Parameters that are required to control the new hardware can be added using a simple tool. As a result reconfiguration is simplified and can be achieved quickly by mechanics without reprogramming any systems. The impact is that time to market can be reduced and manufacturing systems can quickly be adapted to current real-time needs.
DOCUMENT
In this presentation a comparison is made between the state of art of healthcare in the Netherlands compared to other European countries. Dutch healthcare is of a high quality, the Netherlands rank among the top in Europe, but in-patient costs are high. Expenditures are now almost 100 billion euros. Therefor the Netherlands are facing quite some challenges: rising costs due to ageing, more chronic diseases, use of medication, long stay care etc and pressure on staff and waiting lists. Fresh brains (students Logistics from BUas) can help to improve healthcare and reduce costs. Lecturers and students work together in projects with the healthcare sector (learning communities) and students do their internship in various healthcare organizations (cure and care). In this presentation two examples of graduation assignments are mentioned. One student did research on the implementation of barcodes on primary packaging of pharmaceuticals, another student did research on reducing the length of stay for patients with a hip fracture. They came with useful recommendations for improving patient safety, patient satisfaction and reducing costs.
DOCUMENT
This report presents the highlights of the 7th European Meeting on Molecular Diagnostics held in Scheveningen, The Hague, The Netherlands, 12-14 October 2011. The areas covered included molecular diagnostics applications in medical microbiology, virology, pathology, hemato-oncology,clinical genetics and forensics. Novel real-time amplification approaches, novel diagnostic applications and new technologies, such as next-generation sequencing, PCR lectrospray-ionization TOF mass spectrometry and techniques based on the detection of proteins or other molecules, were discussed. Furthermore, diagnostic companies presented their future visions for molecular diagnostics in human healthcare.
DOCUMENT
Verslag: We brengen steeds meer functies in een steeds voller wordende stedelijke ruimte bij elkaar. Wat doet dat met het welzijn van mensen? De BNSP legt de prangende kwestie op tafel. Aan de hand van verschillende cases en lerend van onder meer Leidsche Rijn komen verschillende instrumenten op tafel, van de inrichting van de buitenruimtes tot en met de kunst van het stedelijk programmeren – compleet met barcodes en regels voor ‘goede groei’. Hoog boven het IJ met een panoramisch uitzicht over transformatiegebieden als Overhoeks, NDSM en Houthavens organiseert de Beroepsvereniging van Nederlandse Stedenbouwkundigen en Planologen (BNSP) in samenwerking met de Hogeschool van Amsterdam (HvA) de Salon ‘Bouwen aan leefkwaliteit’. Aanleiding is het tweejarig onderzoeksproject ‘Building for Wellbeing‘ van de Hogeschool van Amsterdam waarin inmiddels 10 recente verdichtingsprojecten in Nederland zijn geanalyseerd (zie kader). Sommige zijn gerealiseerd (zoals Little C in Rotterdam en Duin in Almere), andere bevinden zich nog in de planfase zoals Hyde Park in Hoofddorp, Rijnhaven Rotterdam en Leidsche Rijn Centrum Noord. Onderzoekers Frank Suurenbroek en Hugo Beschoor Plug openen de avond door de eerste bevindingen toe te lichten. [...]
LINK
The aim of this dissertation is to examine how adult learners with a spoken language background who are acquiring a signed language, learn how to use the space in front of the body to express grammatical and topographical relations. Moreover, it aims at investigating the effectiveness of different types of instruction, in particular instruction that focuses the learner's attention on the agreement verb paradigm. To that end, existing data from a learner corpus (Boers-Visker, Hammer, Deijn, Kielstra & Van den Bogaerde, 2016) were analyzed, and two novel experimental studies were designed and carried out. These studies are described in detail in Chapters 3–6. Each chapter has been submitted to a scientific journal, and accordingly, can be read independently.1 Yet, the order of the chapters follows the chronological order in which the studies were carried out, and the reader will notice that each study served as a basis to inform the next study. As such, some overlap in the sections describing the theoretical background of each study was unavoidable.
MULTIFILE
In this article we investigate the change in wetting behavior of inkjet printed materials on either hydrophilic or hydrophobic plasma treated patterns, to determine the minimum obtainable track width using selective patterned μPlasma printing. For Hexamethyl-Disiloxane (HMDSO)/N2 plasma, a decrease in surface energy of approx. 44 mN/m was measured. This resulted in a change in contact angle for water from <10 up to 105 degrees, and from 32 up to 46 degrees for Diethyleneglycol-Dimethaclylate (DEGDMA). For both the nitrogen, air and HMDSO/N2 plasma single pixel wide track widths of approx. 320 μm were measured at a plasma print height of 50 μm. Combining hydrophilic pretreatment of the glass substrate, by UV/Ozone or air μPlasma printing, with hydrophobic HMDSO/N2 plasma, the smallest hydrophilic area found was in the order of 300 μm as well.
DOCUMENT
Inulin is a soluble dietary fibre, also classified as a prebiotic, extracted from chicory roots. The present study aimed to determine the effect of consumption of native chicory inulin on the stool frequency of middle-aged to older adults (40–75 years old) with uncomfortably but not clinically relevant low stool frequency, specified as two to four days without bowel movements per week. Two randomised, double blind, placebo-controlled crossover trials were conducted using similar protocols in differing populations. Trial A was conducted in Amsterdam, The Netherlands and subsequently Trial B was conducted in Newcastle, United Kingdom. Both trials involved supplementation for 5 weeks with 10 g per day of inulin or placebo, a washout period of 2 weeks, and then crossed over to receive the other treatment. In Trial B, faecal gut microbiota composition was assessed using 16S rRNA gene sequencing. In Trial A, which 10 volunteers completed, the stool frequency was significantly increased to an average 4.9 ± 0.23 (SEM) times per week during inulin periods versus 3.6 ± 0.25 in the periods with placebo (p = 0.01). In contrast, in Trial B which 20 volunteers completed, there was no significant effect of the inulin on stool frequency (7.5 ± 2.1 times per week with inulin, 8.1 ± 3.0 with placebo, p = 0.35). However, many subjects in Trial B had a stool frequency >5 per week also for the placebo period, in breach of the inclusion criteria. Combining the data of 16 low stool frequency subjects from Trials A and B showed a significant effect of inulin to increase stool frequency from 4.1 to 5.0 per week (p = 0.032). Regarding secondary outcomes, stool consistency was significantly softer with inulin treatment compared to placebo periods, it increased 0.29 on the Bristol stool scale (p = 0.008) when data from all subjects of Trials A and B were combined. No other differences in bowel habit parameters due to inulin consumption were significant. None of the differences in specific bacterial abundance, alpha or beta diversity were significant, however the trends were in directions consistent with published studies on other types of inulin. We conclude that 10 g per day of native chicory inulin can increase stool frequency in subjects with low stool frequency.
MULTIFILE
Introduction: Retrospective studies suggest that a rapid initiation of treatment results in a better prognosis for patients in the emergency department. There could be a difference between the actual medication administration time and the documented time in the electronic health record. In this study, the difference between the observed medication administration time and documentation time was investigated. Patient and nurse characteristics were also tested for associations with observed time differences. Methods: In this prospective study, emergency nurses were followed by observers for a total of 3 months. Patient inclusion was divided over 2 time periods. The difference in the observed medication administration time and the corresponding electronic health record documentation time was measured. The association between patient/nurse characteristics and the difference in medication administration and documentation time was tested with a Spearman correlation or biserial correlation test. Results: In 34 observed patients, the median difference in administration and documentation time was 6.0 minutes (interquartile range 2.0-16.0). In 9 (26.5%) patients, the actual time of medication administration differed more than 15 minutes with the electronic health record documentation time. High temperature, lower saturation, oxygen-dependency, and high Modified Early Warning Score were all correlated with an increasing difference between administration and documentation times. Discussion: A difference between administration and documentation times of medication in the emergency department may be common, especially for more acute patients. This could bias, in part, previously reported time-to-treatment measurements from retrospective research designs, which should be kept in mind when outcomes of retrospective time-to-treatment studies are evaluated.
DOCUMENT
