The energy efficiency and sustainability of an anaerobic green gas production pathway was evaluated, taking into account five biomass feedstocks, optimization of the green gas production pathway, replacement of current waste management pathways by mitigation, and transport of the feedstocks. Sustainability is expressed by three main factors: efficiency in (Process) Energy Returned On Invested (P)EROI, carbon footprint in Global Warming Potential GWP(100), and environmental impact in EcoPoints. The green gas production pathway operates on a mass fraction of 50% feedstock with 50% manure. The sustainability of the analyzed feedstocks differs substantially, favoring biomass waste flows over, the specially cultivated energy crop, maize. The use of optimization, in the shape of internal energy production, green gas powered trucks, and mitigation can significantly improve the sustainability for all feedstocks, but favors waste materials. Results indicate a possible improvement from an average (P)EROI for all feedstocks of 2.3 up to an average of 7.0 GJ/GJ. The carbon footprint can potentially be reduced from an average of 40 down to 18 kgCO2eq/GJ. The environmental impact can potentially be reduced from an average of 5.6 down to 1.8 Pt/GJ. Internal energy production proved to be the most effective optimization. However, the use of optimization aforementioned will result in les green gas injected into the gas grid as it is partially consumed internally. Overall, the feedstock straw was the most energy efficient, where the feedstock harvest remains proved to be the most environmentally sustainable. Furthermore, transport distances of all feedstocks should not exceed 150 km or emissions and environmental impacts will surpass those of natural gas, used as a reference. Using green gas as a fuel can increase the acceptable transportation range to over 300 km. Within the context aforementioned and from an energy efficiency and sustainable point of view, the anaerobic digestion process should be utilized for processing locally available waste feedstocks with the added advantage of producing energy, which should first be used internally for powering the green gas production process.
This article addresses European energy policy through conventional and transformative sustainability approaches. The reader is guided towards an understanding of different renewable energy options that are available on the policy making table and how the policy choices have been shaped. In arguing that so far, European energy policy has been guided by conventional sustainability framework that focuses on eco-efficiency and ‘energy mix’, this article proposes greater reliance on circular economy (CE) and Cradle to Cradle (C2C) frameworks. Exploring the current European reliance on biofuels as a source of renewable energy, this article will provide recommendations for transition to transformative energy choices. http://dx.doi.org/10.13135/2384-8677/2331 https://www.linkedin.com/in/helenkopnina/
MULTIFILE
The government of Ukraine has adopted the Renewable Energy Directive (RED) with clear goals and a roadmap to facilitate its energy transition towards renewable sources. This is done because of both climate concerns as well as reasons related to Ukraine’s foreign policy which led the government to decide that Ukraine should work more on its own energy independence. Currently the percentage of renewable energy sources in Ukraine is among the lowest of the entire Europe and there is only slow development in terms of the growth of the sector, even though there is a lot of available biomass, given the large and flat surface of the country with a well-developed agricultural sector. As in most countries in the world, there is a quite intensive and well-developed debate in Ukraine about the energy sector, energy usage and the necessary transition towards more renewable types of energy. One of the consequences of it is that Ukraine is one of the partner countries in the Paris agreement and committed itself to reducing the amount of greenhouse gas emissions in the future. That means that a transformation towards renewable energy is needed, even though currently in Ukraine only a low percentage of energy is generated by sustainable sources. The general picture is that in Ukraine the development of the renewable energy sector is going not as fast as could have been. In other words, there are several barriers present that hinder the energy transition. One of the issues behind such a barrier may be a limited access to technology, or problems with legislation or other issues which may be unknown so far, but certainly relevant for foreign investors. The Ukrainian government adopted the so-called Renewable Energy Directive (RED), set goals for the energy transition and support the transition itself. In some areas progress was made, for example in the growing number of biomass fired boilers, but still Ukraine remains one of the European countries with the lowest percentage of renewable energy production. Therefore, in order to identify currently existing barriers and help to find possible applications of new technologies in Ukraine, the Dutch Enterprise Agency (Rijksdienst voor Ondernemerschap) commissioned this study. It was done within the framework of the Partners in Business on Bioenergy program. The focus of this study is on analysing the renewable energy sector, with special attention for biomass, in the form of biomass-based heating and biomass for biofuels. Of course, other parts of the renewable energy sector such as solar and wind energy are also taken into consideration. The second part consists of a case study to determine the business case for direct processing of sugar beets with Betaprocess as a possible application of biomass to biofuel production in Ukraine. The third study is aiming at determining the amount of biomass that can safely be taken from the fields, without negatively affecting the fertility of the soil. These sub-studies mentioned in the previous paragraph offer a better understanding of the renewable energy market in general and biomass/biofuel applications in particular. This study sheds light on several important questions that entrepreneurs and/or other foreign investors may have about investing in Ukraine. Even though it is well-known that doing business in Ukraine is challenging, it is also very important to have a clear picture of the opportunities that this country offers, within the limits that nature sets, in order to avoid negative consequences like soil degradation. The objective of this report is to find out about which opportunities and barriers exist in the Ukrainian transition towards renewable energy generation, to calculate the profitability of new biomass-processing technologies as well as finding out limitations of biomass usage.
MULTIFILE
Agricultural/horticultural products account for 9% of Dutch gross domestic product. Yearly expansion of production involves major challenges concerning labour costs and plant health control. For growers, one of the most urgent problems is pest detection, as pests cause up to 10% harvest loss, while the use of chemicals is increasingly prohibited. For consumers, food safety is increasingly important. A potential solution for both challenges is frequent and automated pest monitoring. Although technological developments such as propeller-based drones and robotic arms are in full swing, these are not suitable for vertical horticulture (e.g. tomatoes, cucumbers). A better solution for less labour intensive pest detection in vertical crop horticulture, is a bio-inspired FW-MAV: Flapping Wings Micro Aerial Vehicle. Within this project we will develop tiny FW-MAVs inspired by insect agility, with high manoeuvrability for close plant inspection, even through leaves without damage. This project focusses on technical design, testing and prototyping of FW-MAV and on autonomous flight through vertically growing crops in greenhouses. The three biggest technical challenges for FW-MAV development are: 1) size, lower flight speed and hovering; 2) Flight time; and 3) Energy efficiency. The greenhouse environment and pest detection functionality pose additional challenges such as autonomous flight, high manoeuvrability, vertical take-off/landing, payload of sensors and other equipment. All of this is a multidisciplinary challenge requiring cross-domain collaboration between several partners, such as growers, biologists, entomologists and engineers with expertise in robotics, mechanics, aerodynamics, electronics, etc. In this project a co-creation based collaboration is established with all stakeholders involved, integrating technical and biological aspects.
Horticulture crops and plants use only a limited part of the solar spectrum for their growth, the photosynthetically active radiation (PAR); even within PAR, different spectral regions have different functionality for plant growth, and so different light spectra are used to influence different properties of the plant, such as leaves, fruiting, longer stems and other plant properties. Artificial lighting, typically with LEDs, has been used to provide these specified spectra per plant, defined by their light recipe. This light is called steering light. While the natural sunlight provides a much more sustainable and abundant form of energy, however, the solar spectrum is not tuned towards specific plant needs. In this project, we capitalize on recent breakthroughs in nanoscience to optimally shape the solar spectrum, and produce a spectrally selective steering light, i.e. convert the energy of the entire solar spectrum into a spectrum most useful for agriculture and plant growth to utilize the sustainable solar energy to its fullest, and save on artificial lighting and electricity. We will take advantage of the developed light recipes and create a sustainable alternative to LED steering light, using nanomaterials to optimally shape the natural sunlight spectrum, while maintaining the increased yields. As a proof of concept, we are targeting the compactness of ornamental plants and seek to steer the plants’ growth to reduce leaf extension and thus be more valuable. To realize this project the Peter Schall group at the UvA leads this effort together with the university spinout, SolarFoil, whose expertise lies in the development of spectral conversion layers for horticulture. Renolit - a plastic manufacturer and Chemtrix, expert in flow synthesis, provide expertise and technical support to scale the foil, while Ludvig-Svensson, a pioneer in greenhouse climate screens, provides the desired light specifications and tests the foil in a controlled setting.
