During the opening of the Hanze Energy Transition Centre or EnTranCe posters were on display for the King and for the public. These posters where accompanied by the researchers to explain their research in more detail if questions did arise.
Thermo-elektrische materialen zijn al sinds de 19e eeuw bekend. In 1834 ontdekte de Franse natuurkundige Jean Peltier dat er warmte wordt getransporteerd van de overgang tussen twee metalen wanneer er een elektrische stroom vloeit door het grensvlak. Het grote voordeel van Peltier elementen is dat er geen bewegende delen of vloeistoffen in zitten, waardoor het onderhoudsarm en stil is. Nadeel is het lage rendement (<10%) van deze materialen. Grootste uitdaging is het vinden van het juiste materiaal: goede elektrische geleiding in combinatie met slechte warmtegeleiding. Slechte warmtegeleiding is noodzakelijk om het temperatuurverschil tussen beide kanten te handhaven. Probleem is dat de meeste materialen die goed elektriciteit geleiden, eveneens goed warmte geleiden. Warmte wordt onder andere doorgegeven door elektronen, elektriciteit ook, dus daar valt niets te winnen. Warmte wordt ook doorgegeven door trillingen (fononen). Deze trillingen probeert men op nanoschaal te dempen. Ontwikkelingen in de nanotechnologie hebben aangetoond dat het mogelijk is om de efficiency van de thermo-elektrische materialen te verbeteren. Hierdoor kan meer elektriciteit worden opgewekt dan voorheen en wordt het Seebeck effect (energy harvesting) interessant. Dit document beschrijft de eigenschappen en toepassingsmogelijkheden van thermo-elektrische materialen. Het document is opgeleverd in het project Innovatief Materialen Platform Twente (IMPT). In dit project heeft het IMPT 75 innovatieve materialen in kaart gebracht. Met een tiental materialen is toegepast onderzoek gedaan, zodat ondernemers en ontwerpers weten of en hoe zij deze kunnen toepassen.
MULTIFILE
Biogas can be seen as a flexible and storable energy carrier, capable of absorbing intermittent energy production and demand. However, the sustainability and efficiency of biogas production as a flexible energy provider is not fully understood. This research will focus on simulating biogas production within decentralised energy systems. Within these system several factors need to be taken into account, including, biomass availability, energy demand, energy production from other decentralised energy sources and factors influencing the biogas production process. The main goal of this PhD. research is to design and develop a method capable of integrating biomass availability, energy demand, biogas production, in a realistic dynamic geographical model, such that conclusions can be drawn on mainly the sustainability, and additionally on the efficiency, flexibility and economy of biogas production in the near and far future (2012 to 2050), within local decentralised smart energy grids. Furthermore. This research can help determining the best use of biogas in the near and far future.
Due to the existing pressure for a more rational use of the water, many public managers and industries have to re-think/adapt their processes towards a more circular approach. Such pressure is even more critical in the Rio Doce region, Minas Gerais, due to the large environmental accident occurred in 2015. Cenibra (pulp mill) is an example of such industries due to the fact that it is situated in the river basin and that it has a water demanding process. The current proposal is meant as an academic and engineering study to propose possible solutions to decrease the total water consumption of the mill and, thus, decrease the total stress on the Rio Doce basin. The work will be divided in three working packages, namely: (i) evaluation (modelling) of the mill process and water balance (ii) application and operation of a pilot scale wastewater treatment plant (iii) analysis of the impacts caused by the improvement of the process. The second work package will also be conducted (in parallel) with a lab scale setup in The Netherlands to allow fast adjustments and broaden evaluation of the setup/process performance. The actions will focus on reducing the mill total water consumption in 20%.
Agricultural/horticultural products account for 9% of Dutch gross domestic product. Yearly expansion of production involves major challenges concerning labour costs and plant health control. For growers, one of the most urgent problems is pest detection, as pests cause up to 10% harvest loss, while the use of chemicals is increasingly prohibited. For consumers, food safety is increasingly important. A potential solution for both challenges is frequent and automated pest monitoring. Although technological developments such as propeller-based drones and robotic arms are in full swing, these are not suitable for vertical horticulture (e.g. tomatoes, cucumbers). A better solution for less labour intensive pest detection in vertical crop horticulture, is a bio-inspired FW-MAV: Flapping Wings Micro Aerial Vehicle. Within this project we will develop tiny FW-MAVs inspired by insect agility, with high manoeuvrability for close plant inspection, even through leaves without damage. This project focusses on technical design, testing and prototyping of FW-MAV and on autonomous flight through vertically growing crops in greenhouses. The three biggest technical challenges for FW-MAV development are: 1) size, lower flight speed and hovering; 2) Flight time; and 3) Energy efficiency. The greenhouse environment and pest detection functionality pose additional challenges such as autonomous flight, high manoeuvrability, vertical take-off/landing, payload of sensors and other equipment. All of this is a multidisciplinary challenge requiring cross-domain collaboration between several partners, such as growers, biologists, entomologists and engineers with expertise in robotics, mechanics, aerodynamics, electronics, etc. In this project a co-creation based collaboration is established with all stakeholders involved, integrating technical and biological aspects.
The energy transition is a highly complex technical and societal challenge, coping with e.g. existing ownership situations, intrusive retrofit measures, slow decision-making processes and uneven value distribution. Large scale retrofitting activities insulating multiple buildings at once is urgently needed to reach the climate targets but the decision-making of retrofitting in buildings with shared ownership is challenging. Each owner is accountable for his own energy bill (and footprint), giving a limited action scope. This has led to a fragmented response to the energy retrofitting challenge with negligible levels of building energy efficiency improvements conducted by multiple actors. Aggregating the energy design process on a building level would allow more systemic decisions to happen and offer the access to alternative types of funding for owners. “Collect Your Retrofits” intends to design a generic and collective retrofit approach in the challenging context of monumental areas. As there are no standardised approaches to conduct historical building energy retrofits, solutions are tailor-made, making the process expensive and unattractive for owners. The project will develop this approach under real conditions of two communities: a self-organised “woongroep” and a “VvE” in the historic centre of Amsterdam. Retrofit designs will be identified based on energy performance, carbon emissions, comfort and costs so that a prioritisation strategy can be drawn. Instead of each owner investing into their own energy retrofitting, the neighbourhood will invest into the most impactful measures and ensure that the generated economic value is retained locally in order to make further sustainable investments and thus accelerating the transition of the area to a CO2-neutral environment.
