BACKGROUND: Early mobilization has been proven effective for patients in intensive care units (ICUs) to improve functional recovery. However, early mobilization of critically ill, often mechanically ventilated, patients is cumbersome because of the attachment to tubes, drains, monitoring devices and muscle weakness. A mobile treadmill with bodyweight support may help to initiate mobilization earlier and more effectively. The aim of this study is to assess the effectiveness of weight-supported treadmill training in critically ill patients during and after ICU stay on time to independent functional ambulation. METHODS: In this randomized controlled trial, a custom-built bedside body weight-supported treadmill will be used and evaluated. Patients are included if they have been mechanically ventilated for at least 48 hours, are able to follow instructions, have quadriceps muscle strength of Medical Research Council sum-score 2 (MRC 2) or higher, can sit unsupported and meet the safety criteria for physical exercise. Exclusion criteria are language barriers, no prior walking ability, contraindications for physiotherapy or a neurological condition as reason for ICU admission. We aim to include 88 patients and randomize them into either the intervention or the control group. The intervention group will receive usual care plus bodyweight-supported treadmill training (BWSTT) daily. The BWSSTT consists of walking on a mobile treadmill while supported by a harness. The control group will receive usual care physiotherapy treatment daily consisting of progressive activities such as bed-cycling and active functional training exercises. In both groups, we will aim for a total of 40 minutes of physiotherapy treatment time every day in one or two sessions, as tolerated by the patient. The primary outcome is time to functional ambulation as measured in days, secondary outcomes include walking distance, muscle strength, status of functional mobility and symptoms of post-traumatic stress. All measurements will be done by assessors who are blinded to the intervention on the regular wards until hospital discharge. DISCUSSION: This will be the first study comparing the effects of BWSTT and conventional physiotherapy for critically ill patients during and after ICU stay. The results of this study contribute to a better understanding of the effectiveness of early physiotherapy interventions for critically ill patients. TRIAL REGISTRATION: Dutch Trial Register (NTR) ID: NL6766. Registered at 1 December 2017.
Introduction: Although some adults with autism spectrum disorder (ASD) require intensive and specialized ASD treatment, there is little research on how these adults experience the recovery process. Recovery is defined as the significant improvement in general functioning compared to the situation prior to treatment. Methods: This qualitative study describes the recovery process from the perspective of adults on the autism spectrum during intensive inpatient treatment. Semi-structured interviews (n = 15) were carried out and analyzed according to the principles of grounded theory. Results: Our results indicate that, given the specific characteristics of autism, therapeutic interventions and goal-oriented work cannot be carried out successfully, and the recovery process cannot begin, if no good working relationship has been established, and if care is not organized in ways that a person on the autism spectrum finds clear and predictable.
Introduction The Integrated Recovery Scales (IRS) was developed by the Dutch National Expertise board for routine outcome monitoring with severe mental illnesses. This board aimed to develop a multidimensional recovery measure directed at 1. clinical recovery, 2. physical health, 3. social recovery (work, social contacts, independent living) and 4. existential, personal recovery. The measure had to be short, suited for routine outcome monitoring and present the perspective of both mental health professionals and service users with severe mental illnesses. All aspects are assessed over a period of the pas 6 months. Objectives The objective of this research is validation of the Integral Recovery Scales and to test the revelance for clinical practice and police evaluation. Methods The instrument was tested with 500 individuals with severe mental illnesses (80% individuals with a psychotic disorder), of whom 200 were followed up for 1 year. For the questions concerning clinical recovery, physical health and social recovery mental health care workers conducted semi structured interviews with people living with serious illnesses. The questions concerning personal health were self-rated. We analyzed interrater reliability, convergent and divergent validity and sensitivity to change. Results The instrument has a good validity and is easy to complete for service users and mental health care workers and appropriate for clinical and policy evaluation goals. Conclusions The Integrated Recovery Scales can be a useful instrument for a simple and meaningful routine outcome monitoring. Page: 121
Currently, many novel innovative materials and manufacturing methods are developed in order to help businesses for improving their performance, developing new products, and also implement more sustainability into their current processes. For this purpose, additive manufacturing (AM) technology has been very successful in the fabrication of complex shape products, that cannot be manufactured by conventional approaches, and also using novel high-performance materials with more sustainable aspects. The application of bioplastics and biopolymers is growing fast in the 3D printing industry. Since they are good alternatives to petrochemical products that have negative impacts on environments, therefore, many research studies have been exploring and developing new biopolymers and 3D printing techniques for the fabrication of fully biobased products. In particular, 3D printing of smart biopolymers has attracted much attention due to the specific functionalities of the fabricated products. They have a unique ability to recover their original shape from a significant plastic deformation when a particular stimulus, like temperature, is applied. Therefore, the application of smart biopolymers in the 3D printing process gives an additional dimension (time) to this technology, called four-dimensional (4D) printing, and it highlights the promise for further development of 4D printing in the design and fabrication of smart structures and products. This performance in combination with specific complex designs, such as sandwich structures, allows the production of for example impact-resistant, stress-absorber panels, lightweight products for sporting goods, automotive, or many other applications. In this study, an experimental approach will be applied to fabricate a suitable biopolymer with a shape memory behavior and also investigate the impact of design and operational parameters on the functionality of 4D printed sandwich structures, especially, stress absorption rate and shape recovery behavior.
Mattresses for the healthcare sector are designed for robust use with a core foam layer and a polyurethane-coated polyester textile cover. Nurses and surgeons indicate that these mattresses are highly uncomfortable to patients because of poor microclimatic management (air, moisture, temperature, friction, pressure regulation, etc) across the mattress, which can cause pressure ulcers (in less than a day). The problem is severe (e.g., extra recovery time, medication, increased risk, and costs) for patients with wounds, infection, pressure-sensitive decubitus. There are around 180,000 waterproof mattresses in the healthcare sector in the Netherlands, of which yearly 40,000 mattresses are discarded. Owing to the rapidly aging population it is expected to increase the demand for these functional mattresses from 180,000 to 400,000 in the next 10 years in the healthcare sector. To achieve a circular economy, Dutch Government aims for a 50% reduction in the use of primary raw materials by 2030. As of January 1, 2022, mattress manufacturers and importers are obliged to pay a waste management contribution. Within the scope of this project, we will design, develop, and test a circular & functional mattress for the healthcare (cure & care) sector. The team of experts from knowledge institutes, SMEs, hospital(s), branch-organization joins hands to design and develop a functional (microclimate management, including ease of use for nurses and patients) mattress that deals with uncomfortable sleeping and addresses the issue of pressure ulcers thereby overall accelerating the healing process. Such development addresses the core issue of circularity. The systematic research with proper demand articulation leads to V-shape verification and validation research methodology. With design focus and applied R&D at TRL-level (4-6) is expected to deliver the validated prototype(s) offering SMEs an opportunity to innovate and expand their market. The knowledge will be used for dissemination and education at Saxion.
Nowadays, there is particular attention towards the recycling of waste materials which is a critical issue for environmental protection and waste management. Polymer materials have numerous applications in daily life products. As a result, plastic pollution has become one of the biggest threats to nature, therefore recycling or replacing them with bio-based materials can significantly help the ecosystems. So far, many studies have investigated the possibility of reusing plastic waste, as a second life, to obtain consumable products. The 3D printing market is one of the great sectors that can utilize a wide range of thermoplastic polymers. This technology provides a unique capability to produce complex shape structures and products that cannot be produced by other manufacturing processes. In particular, Fused Filament Fabrication (FFF) is a common printing technology that consumes thermoplastic filaments including recycled materials. This printing technique has been also very successful in using novel high-performance materials with sustainable aspects. The reSHAPE project aims to develop novel smart filaments, with shape memory properties, from recycled materials. The filaments can be applied for the design and fabrication of smart products with dynamic behavior. In particular, the fabricated parts can shift from a plastic-deformed shape into a recovered original shape when being triggered by an external stimulus, like temperature. For that, we will specifically apply recycled polylactic acid (PLA) and thermoplastic polyurethane (TPU) as the main materials in this study. Because they both have proper shape memory properties and also TPU can potentially enhance the material flexibility which is required in the design and fabrication of functional components. As a result, this study will obtain a proper combination of these materials with good printability and functionality that can be used for a wide range of products from the aerospace and automotive sectors to soft robotics and medical devices.
