The importance of teaching engineering students innovation development is commonly clearly understood. It is essential to achieve products which are attractive and profitable in the market. To achieve this, an institute of engineering education has to provide students with needed knowledge, skills and attitudes including both technical and business orientation. This is important especially for SME’s. Traditionally, education of engineering provides students with basic understanding how to solve common technical problems. However companies need wider view to achieve new products. Universities of applied Sciences in Oulu and Eindhoven want to research what is the today’s educational situation for this aim, to find criteria to improve the content of the educational system, and to improve the educational system. Important stakeholders are teachers and students within the institute but also key-persons in companies. The research is realized by questionnaires and interviews from which a current situation can be found. The research will also include the opinion of management who give possibilities to change the curriculum. By this research more insight will be presented about how to re-design a current curriculum. The research will act as basis for this discussion in SEFI-conference about formulating a curriculum that includes elements for wide-ranging knowledge and skills to achieve innovations especially in SME’s.
In September 2009 the department of Engineering of Fontys University of Applied Sciences in the Netherlands has started a pilot honours program for excellent engineering students called PRogram OUstanding Development (PROUD). Aim of this program is to give those engineering students, who have the ambition, the opportunity to work on extra profession related challenges in their study. By means of this PROUD program Fontys University of Applied Sciences is responding to the wishes of students for extra curricular activities and increasing need from the industry for excellent professionals with an extra level of theoretical knowledge and practical experience. In this paper the courses offered at the Engineering department of the Fontys University of Applied Sciences are discussed. Different study possibilities/routings for students were developed depending on earlier acquainted competences, adaptation abilities to our system (special possibilities for slow starters) and tracking and tracing by intensive study coaching. This resulted in an improvement of the yield of students to 74% of students started in 2008. After working successfully on reducing the drop out rate of our engineering students the department focused on possibilities for excellent students. The department started the PROUD pilot together with engaged engineering students. In 2008 engineering students have carried out a research among their fellow students, lecturers, other institutes [1] and industry. This resulted in a quite different approach of an honours program for the department of Electronic and Electrical Engineering. In the PROUD program the student is stimulated to personally shape his educational career and to explicitly work on developing his own competences. The PROUD excellent program starts after the first year and extends to at least 3 semesters in the following years. The student, guided by a supervisor and outside the regular study time, is working on building an excellent portfolio at the university as well as in industry. During this period the PROUD student will work in industry one day a week in average. This is on top of his bachelor educational program. The students will receive an excellent honours certificate together with their bachelor's degree at the end of the study to express their honourable work. Each year about 20 students apply for a place in PROUD but thus far only about 3-4 passed the first interview round. It turns out that student, university and industry are eager to participate in this PROUD program.
This paper is a case report of why and how CDIO became a shared framework for Community Service Engineering (CSE) education. CSE can be defined as the engineering of products, product-service combinations or services that fulfill well-being and health needs in the social domain, specifically for vulnerable groups in society. The vulnerable groups in society are growing, while fewer people work in health care. Finding technical, interdisciplinary solutions for their unmet needs is the territory of the Community Service Engineer. These unmet needs arise in local niche markets as well as in the global community, which makes it an interesting area for innovation and collaboration in an international setting. Therefore, five universities from Belgium, Portugal, the Netherlands, and Sweden decided to work together as hubs in local innovation networks to create international innovation power. The aim of the project is to develop education on undergraduate, graduate and post-graduate levels. The partners are not aiming at a joined degree or diploma, but offer a shared short track blended course (3EC), which each partner can supplement with their own courses or projects (up to 30EC). The blended curriculum in CSE is based on design thinking principles. Resources are shared and collaboration between students and staff is organized at different levels. CDIO was chosen as the common framework and the syllabus 2.0 was used as a blueprint for the CSE learning goals in each university. CSE projects are characterized by an interdisciplinary, human centered approach leading to inter-faculty collaboration. At the university of Porto, EUR-ACE was already used as the engineering education framework, so a translation table was used to facilitate common development. Even though Thomas More and KU Leuven are no CDIO partner, their choice for design thinking as the leading method in the post-Masters pilot course insured a good fit with the CDIO syllabus. At this point University West is applying for CDIO and they are yet to discover what the adaptation means for their programs and their emerging CSE initiatives. CDIO proved to fit well to in the authentic open innovation network context in which engineering students actively do CSE projects. CDIO became the common language and means to continuously improve the quality of the CSE curriculum.
Due to the existing pressure for a more rational use of the water, many public managers and industries have to re-think/adapt their processes towards a more circular approach. Such pressure is even more critical in the Rio Doce region, Minas Gerais, due to the large environmental accident occurred in 2015. Cenibra (pulp mill) is an example of such industries due to the fact that it is situated in the river basin and that it has a water demanding process. The current proposal is meant as an academic and engineering study to propose possible solutions to decrease the total water consumption of the mill and, thus, decrease the total stress on the Rio Doce basin. The work will be divided in three working packages, namely: (i) evaluation (modelling) of the mill process and water balance (ii) application and operation of a pilot scale wastewater treatment plant (iii) analysis of the impacts caused by the improvement of the process. The second work package will also be conducted (in parallel) with a lab scale setup in The Netherlands to allow fast adjustments and broaden evaluation of the setup/process performance. The actions will focus on reducing the mill total water consumption in 20%.
In the context of global efforts to increase sustainability and reduce CO2 emissions in the chemical industry, bio-based materials are receiving increasing attention as renewable alternatives to petroleum-based polymers. In this regard, Visolis has developed a bio-based platform centered around the efficient conversion of plant-derived sugars to mevalonolactone (MVL) via microbial fermentation. Subsequently, MVL is thermochemically converted to bio-monomers such as isoprene and 3-methyl-1,5-pentane diol, which are ultimately used in the production of polymer materials. Currently, the Visolis process has been optimized to use high-purity, industrial dextrose (glucose) as feedstock for their fermentation process. Dutch Sustainable Development (DSD) has developed a direct processing technology in which sugar beets are used for fermentation without first having to go through sugar extraction and refinery. The main exponent of this technology is their patented Betaprocess, in which the sugar beet is essentially exposed to heat and a mild vacuum explosion, opening the cell walls and releasing the sugar content. This Betaprocess has the potential to speed up current fermentation processes and lower feedstock-related costs. The aim of this project is to combine aforementioned technologies to enable the production of mevalonolactone using sucrose, present in crude sugar beet bray after Betaprocessing. To this end, Zuyd University of Applied Sciences (Zuyd) intends to collaborate with Visolis and DSD. Zuyd will utilize its experience in both (bio)chemical engineering and fermentation to optimize the process from sugar beet (pre)treatment to product recovery. Visolis and DSD will contribute their expertise in microbial engineering and low-cost sugar production. During this collaboration, students and professionals will work together at the Chemelot Innovation and Learning Labs (CHILL) on the Brightlands campus in Geleen. This collaboration will not only stimulate innovation and sustainable chemistry, but also provides starting professionals with valuable experience in this expanding field.
The global market for the industrial manufacturing of recombinant proteins (RPS) is steadily increasing and demand will keep rising in years to come. Currently, RPs are already an integral part of disease therapeutics, agriculture and the chemical industry and RP manufacturing methods rely heavily on host systems such as prokaryotes and, to a lesser extent, mammalian, yeast and plant cells. When comparing these host systems, all have their specific strengths and weaknesses and numerous challenges remain to improve protein manufacturing on an industrial scale. In this project, GLO Biotics proposes an innovative plant-based RP expression platform with the potential of significantly reducing costs and process requirements compared to the current state-of-the-art systems. Specifically, this novel concept is based on the use of coconut water as a natural, cell-free ‘protein production factory’. Coconut water in nuts aged 4-6 months is composed of free-floating cell nuclei devoid of cell walls, and it has been demonstrated these nuclei can express foreign proteins. Compared to existing platforms, the relative ease of delivering foreign protein-coding genes into this system, as well as the ease of recovery of the produced protein, potentially offers an innovative platform with great commercial attractiveness. In summary, the aim of this project is to provide a proof-of-concept for coconut water as a novel and competitive RP production platform by demonstrating the production and recovery of several commercially available RPs. To this end, GLO Biotics intends to collaborate with Zuyd University of Applied Sciences (Zuyd) and the Aachen Maastricht Institute for Biobased Materials (AMIBM) in demonstrating the potential of the ‘GLO-Conuts’ expression system. As a consortium, Zuyd and GLO Biotics will utilize their shared experience in molecular engineering and DNA vector technology and AMIBM will bring their expertise in plant-based RP production and recovery.
