The increase in consumption of resources has led to more waste being generated, which then needs to be managed at the end of their life-cycle as waste. Current practices of waste management are not efficient as they lead to a release of emissions and a loss of value that is present in the resource, which is discarded as waste. New legislation for efficient waste management practices has been established, however, adopting them is hampered by factors, one of which is the high cost of these solutions. However, incentive-based approaches can be used to address this problem. This research explores the role of institutional incentives in the form of property rights bundles for such cases. Property rights are a set of formal and informal rules that define how resource allocation is done, while property rights bundles are the set of one or more property rights tied together. As per academic literature, a clear allocation of property rights leads to an economically efficient distribution of costs, benefits, risks and responsibilities associated with a resource. Based on these aspects, this research explores the influence of property rights bundles in the case of collective ownership of waste processing infrastructure by companies. Through collective ownership of the infrastructure, the investment cost would be distributed among those using the resource, thereby reducing the share of investment per company and addressing the challenge of high investment costs. Furthermore, in this situation of collective ownership, property rights need to be defined clearly so that there are no conflicts among the participants at later stages. The research is based on a case study of a few companies in Amsterdam, who are attempting to set up an initiative to improve the waste management practice in the region. For this purpose, they plan to invest collectively in a waste-processing infrastructure. This research thus explores the role of property rights in this regard. The literature on property rights forms the theoretical foundation of the research, along with the Theory of Planned Behaviour, which is the behavioural theory chosen to analyse the decision-making of the companies. The case study was analysed using the Institutional Analysis and Development framework. An agent-based model was built based on the insights obtained from these concepts to capture the interaction between the property rights and the characteristics of the companies, such as the amount of waste generated by them, the amount of budget they hold, etc. The influence of property rights bundles was analysed using the attributes of property rights: robustness, strength, duration and excludability. The results obtained were analysed using the defined Key Performance Indicators: Joining Ratio, Number of Participants and Number of times the initiative is started. It was found that for the case of the Amsterdam Zuidoost initiative, providing property rights bundles of claimants and proprietors as incentives leads to an increase in the number of participants that join the initiative. However, due to lack of statistical significance between the distributions, we cannot determine which of the two has a higher influence. Furthermore, the influence of the other property rights bundle could not be verified due to lack of statistical significance in the distribution.
MULTIFILE
Draft research proposal; 20 JAN 2013. Preliminary proposal for a 3 (max 4) year research project leading to a PhD. In preparation for the WION workshops on Advanced Purchasing Research and to be worked out in more detail as a PhD research proposal before MAY 2013. The research objective is to find out: How innovating SMEs can best use Industrial Property Rights (patents) within value chains with their (SME) suppliers and their (SME) customers, what are best practices and improvement areas, what is a suitable theoretical framework, how can enterprises, business researchers & practitioners benefit from applying this framework.
DOCUMENT
This thesis provides an examination of judgement autonomy of Dutch commercial real estate valuers in relation to client orientation. The valuation of commercial real estate such as offices or retail properties requires in-depth analysis due to its uniqueness by location, building type and usage details. Essentially, a register-valuer is qualified and instructed to assess a property value to one’s best cognitive effort and inform others of this outcome by means of a valuation report. In the Netherlands, concerns over independence risks and client-related judgement risks of valuers have been raised by regulative authorities as the Dutch Central Bank (DNB) and the Dutch Authority for the Financial Markets (AFM). A significant part of these concerns followed the 2008 financial crisis, which appeared to be at least partially driven by unreliable and incomparable valuations of Dutch commercial real estate (AFM, 2014; DNB, 2012; 2015). Among other things, these concerns led to the instigation of the Nederlands Register Vastgoed Taxateurs (NRVT) in 2015. NRVT is a new Dutch central register of valuation practitioners set up in order to improve self-regulation, quality control and compliance of valuation practitioners. Currently, the chamber for commercial real estate valuation holds about 2,000 commercial valuation registrations (NRVT, 2020). The introduction of NRVT, and other measures taken, reflect an instrumental view towards enhancing professionalism of Dutch valuers. This view is based on a systematic orientation to professional conduct in which good practice is primarily objectively determined (Van Ewijk, 2019). However, Wassink and Bakker (2016) point out that individuals make personal choices in order to deal with work complexity. Insight into and reflection on individual choices is part of what is referred to as normative aspects of professionalisation: what norms prevail in individual judgement and decision-making and why (Van Ewijk, 2019). In this regard, insight into judgement reasoning of valuation practitioners may contribute to normative levels of professional development of valuers. The need for such is expressed through community concerns over how individual judgement autonomy may become subdued due to instrumental-driven developments taking place in the sector. The combination of authoritative concerns over professional quality in the Netherlands and lack of (scientific) insight on how client influence affects judgement in valuation practice poses a problem: How may practitioners address client-related judgement bias risks and improve valuation accuracy from this viewpoint, if little is known on how such risks may occur in daily practice? The seemingly scarce scientific insights available in this regard in the Netherlands may also prevent educational programs to adequately address valuer independence and objectivity risks in relevant training programs. In order to address this knowledge gap, the present PhD research examines the following research problem: 169 Summary “How does client orientation affect professional judgement autonomy of commercial real estate valuers in the Netherlands?” The term ‘client orientation’ should be broadly interpreted and may refer to valuers’ perception, understanding and meaning given to alleged, actual or anticipated client-related aspects. Information on such client aspects is not required for the performance of valuation instructions. It should also be noted that this research examines the context of how client orientation may affect valuer judgement reasoning patterns during work practice, yet not its effect in terms of decision on final value opinion.
MULTIFILE
Recycling of plastics plays an important role to reach a climate neutral industry. To come to a sustainable circular use of materials, it is important that recycled plastics can be used for comparable (or ugraded) applications as their original use. QuinLyte innovated a material that can reach this goal. SmartAgain® is a material that is obtained by recycling of high-barrier multilayer films and which maintains its properties after mechanical recycling. It opens the door for many applications, of which the production of a scoliosis brace is a typical example from the medical field. Scoliosis is a sideways curvature of the spine and wearing an orthopedic brace is the common non-invasive treatment to reduce the likelihood of spinal fusion surgery later. The traditional way to make such brace is inaccurate, messy, time- and money-consuming. Because of its nearly unlimited design freedom, 3D FDM-printing is regarded as the ultimate sustainable technique for producing such brace. From a materials point of view, SmartAgain® has the good fit with the mechanical property requirements of scoliosis braces. However, its fast crystallization rate often plays against the FDM-printing process, for example can cause poor layer-layer adhesion. Only when this problem is solved, a reliable brace which is strong, tough, and light weight could be printed via FDM-printing. Zuyd University of Applied Science has, in close collaboration with Maastricht University, built thorough knowledge on tuning crystallization kinetics with the temperature development during printing, resulting in printed products with improved layer-layer adhesion. Because of this knowledge and experience on developing materials for 3D printing, QuinLyte contacted Zuyd to develop a strategy for printing a wearable scoliosis brace of SmartAgain®. In the future a range of other tailor-made products can be envisioned. Thus, the project is in line with the GoChem-themes: raw materials from recycling, 3D printing and upcycling.
Size measurement plays an essential role for micro-/nanoparticle characterization and property evaluation. Due to high costs, complex operation or resolution limit, conventional characterization techniques cannot satisfy the growing demand of routine size measurements in various industry sectors and research departments, e.g., pharmaceuticals, nanomaterials and food industry etc. Together with start-up SeeNano and other partners, we will develop a portable compact device to measure particle size based on particle-impact electrochemical sensing technology. The main task in this project is to extend the measurement range for particles with diameters ranging from 20 nm to 20 um and to validate this technology with realistic samples from various application areas. In this project a new electrode chip will be designed and fabricated. It will result in a workable prototype including new UMEs (ultra-micro electrode), showing that particle sizing can be achieved on a compact portable device with full measuring range. Following experimental testing with calibrated particles, a reliable calibration model will be built up for full range measurement. In a further step, samples from partners or potential customers will be tested on the device to evaluate the application feasibility. The results will be validated by high-resolution and mainstream sizing techniques such as scanning electron microscopy (SEM), dynamic light scattering (DLS) and Coulter counter.
Paper sludge contains papermaking mineral additives and fibers, which could be reused or recycled, thus enhancing the circularity. One of the promising technologies is the fast pyrolysis of paper sludge, which is capable of recovering > 99 wt.% of the fine minerals in the paper sludge and also affording a bio-liquid. The fine minerals (e.g., ‘circular’ CaCO3) can be reused as filler in consumer products thereby reducing the required primary resources. However, the bio-liquid has a lower quality compared to fossil fuels, and only a limited application, e.g., for heat generation, has been applied. This could be significantly improved by catalytic upgrading of the fast pyrolysis vapor, known as an ex-situ catalytic pyrolysis approach. We have recently found that a high-quality bio-oil (mainly ‘bio-based’ paraffins and low-molecular-weight aromatics, carbon yield of 21%, and HHV of 41.1 MJ kg-1) was produced (Chem. Eng. J., 420 (2021), 129714). Nevertheless, catalyst deactivation occurred after a few hours’ of reaction. As such, catalyst stability and regenerability are of research interest and also of high relevance for industrial implementation. This project aims to study the potential of the add-on catalytic upgrading step to the industrial fast pyrolysis of paper sludge process. One important performance metric for sustainable catalysis in the industry is the level of catalyst consumption (kgcat tprod-1) for catalytic pyrolysis of paper sludge. Another important research topic is to establish the correlation between yield and selectivity of the bio-chemicals and the catalyst characteristics. For this, different types of catalysts (e.g., FCC-type E-Cat) will be tested and several reaction-regeneration cycles will be performed. These studies will determine under which conditions catalytic fast pyrolysis of paper sludge is technically and economically viable.
