Horizontal axis wind turbines (HAWTs) experience three-dimensional rotational and unsteady aerodynamic phenomena at the rotor blades sections. These highlyunsteady three-dimensional effects have a dramatic impact on the aerodynamic load distributions on the blades, in particular, when they occur at high angles of attack due to stall delay and dynamic stall. Unfortunately, there is no complete understanding of the flow physics yet at these unsteady 3D flow conditions, and hence, the existing published theoretical models are often incapable of modelling the impact on the turbine response realistically. The purpose of this paper is to provide an insight on the combined influence of the stall delay and dynamic stall on the blade load history of wind turbines in controlled and uncontrolled conditions. New dynamic stall vortex and nonlinear tangential force coefficient modules, which integrally take into account the three dimensional rotational effect, are also proposed in this paper. This module along with the unsteady influence of turbulent wind speed and tower shadow is implemented in a blade element momentum (BEM) model to estimate the aerodynamic loads on a rotating blade more accurately. This work presents an important step to help modelling the combined influence of the stall delay and dynamic stall onthe load history of the rotating wind turbine blades which is vital to have lighter turbine blades and improved wind turbine design systems.
DOCUMENT
De oplossing voor vraagstukken in de publieke ruimte wordt doorgaans in fysieke maatregelen gezocht. Dat is een kostbare aangelegenheid. Er zijn nu ook nieuwe middelen om de publieke ruimte te versterken. Frank Suurenbroek, Ivan Nio en Martijn de Waal van de Hogeschool van Amsterdam (HvA) onderzoeken hoe interactieve objecten de openbare ruimte aangenamer kunnen maken voor de gebruiker. De ArenA Boulevard vormt hiervoor de proeftuin.
DOCUMENT
In this report, the details of an investigation into the e ect of the low induction wind turbines on the Levelised Cost of Electricity (LCoE) in a 1GW o shore wind farm is outlined. The 10 MW INNWIND.EU conventional wind turbine and its low induction variant, the 10 MW AVATAR wind turbine, are considered in a variety of 10x10 layout configurations. The Annual Energy Production (AEP) and cost of electrical infrastructure were determined using two in-house ECN software tools, namely FarmFlow and EEFarm II. Combining this information with a generalised cost model, the LCoE from these layouts were determined. The optimum LCoE for the AVATAR wind farm was determined to be 92.15 e/MWh while for the INNWIND.EU wind farm it was 93.85 e/MWh. Although the low induction wind farm o ered a marginally lower LCoE, it should not be considered as definitive due to simple nature of the cost model used. The results do indicate that the AVATAR wind farms require less space to achieve this similar cost performace, with a higher optimal wind farm power density (WFPD) of 3.7 MW/km2 compared to 3 MW/km2 for the INNWIND.EU based wind farm.
DOCUMENT
