There is an urgent need for energy renovation of the existing building stock, in order to reach the climate goals, set in Paris in 2016. To reach climate targets, it is important to considerably lower energy demand as well as switch to fossil-free heating systems. Unfortunately, renovation rates across the EU remain at a low level of 1% per year. Deep renovation, which lowers energy use with 60% or more, accounts only for 0,2% of renovations. The heating transition thus progresses much more slowly than the electricity transition. We draw on the framework of technological innovation systems, which allows comparison of different transitions. In the literature, it is argued that the configurational nature of the renovation system is one of the main reasons for the slow heating transition. The renovation system is context-bound and consists of many actors both on the demand-side and the supply-side, which leads to a fragmented market. For increasing the speed of the heating transition, it is deemed important to counter this fragmentation. We carried out a review of reports and publications of EU-funded projects on energy renovation. In many projects fragmentation in the building sector was identified as one of the main obstacles. We analyzed the deliverables of these energy renovation projects to find tried and tested solutions. One of these is the so-called one-stop-shop, which promises to improve the organization of the supply side, while also providing an appropriate and affordable solution to the customer. In the discussion we argue that the energy renovation system could be improved by increasing collaboration on the supply side and at the same time simplifying the renovation process for customers. A promising tool to make this happen is the one-stop-shop.
LINK
The paper explores whether and under what conditions, vaccination against SARS-CoV-2 may become a mandatory requirement for employees. It includes a discussion on EU action on SARS-CoV-2 vaccination and its relevance for national level policy with emphasis on the legal basis and instruments used by the Union to persuade national authorities into action to increase vaccination uptake. The analysis then moves to the national level by focusing on the case of Hungary. Following an overview of the legal and regulatory framework for SARS-CoV-2 vaccines deployment, the analysis zooms into the sphere of employment and explores whether and how the SARS-CoV-2 vaccination may be turned into a mandatory workplace safety requirement. The paper highlights the decision of the Hungarian government to introduce compulsory vaccination for employees in the healthcare sector, and concludes with a discussion of the relevant rules and their potential, broader implications.
MULTIFILE
For many EU citizens, working across the border is the only way to make a living in the EU. The battle for cheap labour has now become a well-oiled machine, in which almost all Western European countries participate. Nevertheless, the employment situation of EU Mobile Citizens, workers of low-skilled and -paid jobs, is often substandard. Challenges are housing, health care and working conditions. In addition, due to the lack of registration in municipalities, it is impossible to have an overview of the numbers and to offer effective help. This is a problem in small to medium-sized cities, where many workers live to work in agriculture, transport, construction, meat industry and logistics. For this study, 32 interviews were conducted in eleven small to medium-sized towns (SMSTs) in Sweden, Germany, the Netherlands, Ireland, Poland, and Spain. The study uses three different perspectives: EU representatives of participating regions, municipalities, and employers. The outcomes show that most SMSTs deal with a shortage of housing, and a lack of grip on the registration process of EU citizens. Although there are some success stories, most SMSTs are not in touch with each other to share these. The paper concludes with proposals for further action-research and collaborations to impact local policies.
One of the mission-driven innovation policies of the Netherlands is energy transition which sets, among others, the challenge for a carbon-neutral built environment in 2050. Around 41% of Dutch houses do not yet have a registered energy label, and approximately 31% of the registered houses have label C or lower. This calls for action within the housing renovation industry. Bound to the 70 percent rule, a renovation plan requires full (or at least 70 percent) agreement on the renovation between relevant parties, including residents. In practice, agreement indicators focus mostly on economic and energy aspects. When indicators include people’s needs and preferences, it is expected to speed participation and agreement, increasing residents’ satisfaction and enhances the trust in public institutions. Tsavo was founded in 2015 to organise the sustainability of buildings for ambitious clients. Its sustainability process aims to accelerate renovation by keeping at their core value the social needs and preferences of residents. In this project Tsavo and TU Delft work together to optimise the sustainability process so, it includes everyone’s input and results in a sustainability plan that represents everyone. Tsavo’s role will be key in keeping the balance between both a sustainable renovation service that is cheaper and fast yet also attractive and with an impact on the quality of living. In this project, Tsavo’s sustainable renovation projects will be used to implement methods that focus on increasing participation and residents’ satisfaction. TU Delft will explore principles of attractive, accessible and representative activities to stimulate residents to decide on a renovation plan that is essential and meaningful to all.
De afgelopen twee decennia is er veel meer aandacht ontstaan bij onderzoekers en beleidsmakers voor het begrip co-creatie. Bijna altijd wordt de rol van co-creatie als positief en essentieel gezien in een proces waarin maatschappelijke of publieke uitdagingen worden onderzocht en opgelost (zogenaamde sociale innovatie). Het meeste onderzoek naar deze twee begrippen is kwalitatief van aard en gebaseerd op ‘case studies’.In zijn promotieonderzoek kijkt Peter Broekema naar de rol van co-creatie binnen sociale innovatie in Europese samenwerkingsprojecten. In zijn eerste artikel heeft hij de begrippen co-creatie en sociale innovatie tussen 1995 en 2018 binnen de EU geanalyseerd en geconcludeerd dat beide begrippen steeds breder gebruikt worden en samen met het begrip impact zijn getransformeerd tot een beleidsparadigma.In het tweede artikel keek Peter Broekema hoe beide begrippen doorwerken in specifieke subsidieoproepen en hoe consortia deze begrippen toepassen en samenwerken. Hierbij bleek dat er weliswaar verschillende typen consortia bestaan, maar dat zij geen specifieke co-creatiestrategie hadden.In zijn laatste twee artikelen zal hij gedetailleerd kijken naar een aantal EU projecten en vaststellen hoe de samenwerking is verlopen en hoe tevreden de verschillende partners zijn met het resultaat. Peter Broekema maakt hiervoor gebruik van projecten waarin hij zelf participeert (ACCOMPLISSH, INEDIT en SHIINE).EU beleidsparadigma van sociale innovatie in combinatie met co-creatie en impact. Co-creatie vindt vaak binnen eigen type stakehodlers plaatsAbstractSocial innovation and co-creation are both relatively new concepts, that have been studied by scholars for roughly twenty years and are still heavily contested. The former emerged as a response to the more technologically focused concept of innovation and the latter originally solely described the collaboration of end-users in the development of new products, processes or services. Between 2010-2015, both concepts have been adapted and started to be used more widely by for example EU policymakers in their effort to tackle so called ‘grand societal challenges’. Within this narrative – which could be called co-creation for social innovation, it is almost a prerequisite that partners – especially citizens - from different backgrounds and sectors actively work together towards specific societal challenges. Relevance and aimHowever, the exact contribution of co-creation to social innovation projects is still unclear. Most research on co-creation has been focussing on the involvement of end-users in the development of products, processes and services. In general, scholars conclude that the involvement of end-users is effective and leads to a higher level of customer satisfaction. Only recently, research into the involvement of citizens in social innovation projects has started to emerge. However, the majority of research on co-creation for social innovation has been focusing on collaborations between two types of partners in the quadruple helix (citizens, governments, enterprises and universities). Because of this, it is still unclear what co-creation in social innovation projects with more different type of partners entails exactly. More importantly however, is that most research has been based on national case studies in which partners from different sectors collaborate in a familiar ‘national’ setting. Normally institutional and/or cultural contexts influence co-creation (for example the ‘poldermodel’in the Netherlands or the more confrontational model in France), so by looking at projects in a central EU and different local contexts it becomes clear how context effects co-creation for social innovation.Therefore this project will analyse a number of international co-creation projects that aim for social innovation with different types of stakeholders in a European and multi-stakeholder setting.With this research we will find out what people in different contexts believe is co-creation and social innovation, how this process works in different contexts and how co-creation contributes to social innovation.Research question and - sub questionsThe project will answer the following question: “What is the added value of co-creation in European funded collaboration projects that aim for social innovation?” To answer the main question, the research has been subdivided into four sub questions:1) What is the assumed added value of co-creation for social innovation?2) How is the added value of co-creation for social innovation being expressed ex ante and ex post in EU projects that aim specifically for social innovation by co-creation?3) How do partners and stakeholders envision the co-creation process beforehand and continuously shape this process in EU projects to maximise social innovation?4) How do partners and stakeholders regard the added value of co-creation for social innovation in EU projects that that aim for social innovation?Key conceptsThe research will focus on the interplay between the two main concepts a) co-creation and b) social innovation. For now, we are using the following working definitions:a) co-creation is a non-linear process that involves multiple actors and stakeholders in the ideation, implementation and assessment of products, services, policies and systems with the aim of improving their efficiency and effectiveness, and the satisfaction of those who take part in the process.b) social innovation is the invention, development and implementation of new ideas with the purpose to (immediately) relieve and (eventually) solve social problems, which are in the long run directed at the social inclusion of individuals, groups or communities.It is clear that both definitions are quite opaque, but also distinguish roughly the same phases (ideation/invention, development, implementation and assessment) and also distinguish different levels (products/services, policies and systems). Both concepts will be studied within the policy framework of the EU, in which a specific value to both concepts has been attributed, mostly because policymakers regard co-creation with universities and end-users almost as a prerequisite for social innovation. Based on preliminary research, EU policies seem to define social innovation in close reation with ‘societal impact’, which could defined as: “the long lasting effect of an activity on society, because it is aimed at solving social problems”, and therefore in this specific context social innovation seems to encompasses societal impact. For now, I will use this working definition of social innovation and will closely look at the entanglement with impact in the first outlined paper.MethodologyIn general, I will use a qualitative mixed method approach and grounded theory to answer the main research question (mRQ). In order to better understand the added value of co-creation for social innovation in an EU policy setting, the research will:SubRQ1) start with an analysis of academic literature on co-creation and social impact. This analysis will be followed by and confronted with an analysis of EU policy documents. SubRQ2) use a qualitative data analysis at nineteen EU funded projects to understand how co-creation is envisoned within social innovation projects by using the quintuple helix approach (knowledge flows between partners and stakeholders in an EU setting) and the proposed social innovation journey model. By contrasting the findings from the QDA phase of the project with other research on social innovation we will be able to find arachetypes of social innovation in relation with the (perceived) added value of co-creation within social innovation. SubRQ3) These archetypes will be used to understand the process of co-creation for social innovation by looking closely at behavioural interactions within two social innovation projects. This close examination will be carried out by carrying out interviews with key stakeholders and partners and participant observation.SubRQ4) The archetypes will also be used to understand the perceived added value by looking closely at behavioural interactions within two social innovation projects. This close examination will be carried out by carrying out interviews with key stakeholders and partners and participant observation.ImpactThe project will contribute to a better understanding of the relationship between co-creation and social innovation on different levels:a) Theoretical: the research will analyse the concepts of co-creation and social innovation in relation to each other by looking at the origins of the concepts, the adaptation in different fields and the uptake within EU policies;b) Methodological: a model will be developed to study and understand the non-lineair process of co-creation within social innovation, by focusing on social innovation pathways and social innovation strategies within a quintuple helix setting (i) academia, ii) enterprises and iii) governments that work together to improve iv) society in an v) EU setting);c) Empirical: the project will (for the first time) collect data on behavioural interactions and the satisfaction levels of these interactions between stakeholders and partners in an EU project.d) Societal: the results of the research could be used to optimize the support for social innovation projects and also for the development of specific funding calls.
Background:Many business intelligence surveys demonstrate that Digital Realities (Virtual reality and Augmented Reality) are becoming a huge market trend in many sectors, and North America is taking the lead in this emerging domain. Tourism is no exception and the sector in Europe must innovate to get ahead of the curve of this technological revolution, but this innovation needs public support.Project partnership:In order to provide labs, startups and SMEs willing to take this unique opportunity with the most appropriate support policies, 9 partner organizations from 8 countries (FR, IT, HU, UK, NO, ES, PL, NL) decided to work together: regional and local authorities, development agencies, private non-profit association and universities.Objective of the project:Thanks to their complementary experiences and know-how, they intend to improve policies of the partner regions (structural funds and regional policies), in order to foster a tourist channeled innovation in the Digital Realities sector.Approach:All partners will work together on policy analysis tasks before exchanging their best initiatives and transferring them from one country to another. This strong cooperation will allow them to build the best conditions to foster innovation thanks to more effective structural funds policies and regional policies.Main activities & outputs:8 policy instruments are addressed, among which 7 relate to structural funds programmes. Basis for exchange of experience: Reciprocal improvement analysis and 8 study trips with peer-review of each partner’s practices. Video reportages for an effective dissemination towards other territories in Europe.Main expected results:At least 16 good practices identified. 8 targeted policy instruments improved. At least 27 staff members will transfer new capacities in their intervention fields. At least 8 involved stakeholders with increased skills and knowledge from exchange of experience. Expected 17 appearances in press and media, including at European level.
