D3.7
DOCUMENT
Older people are often over-represented in morbidity and mortality statistics associated with hot and cold weather, despite remaining mostly indoors. The study “Improving thermal environment of housing for older Australians” focused on assessing the relationships between the indoor environment, building characteristics, thermal comfort and perceived health/wellbeing of older South Australians over a study period that included the warmest summer on record. Our findings showed that indoor temperatures in some of the houses reached above 35 °C. With concerns about energy costs, occupants often use adaptive behaviours to achieve thermal comfort instead of using cooling (or heating), although feeling less satisfied with the thermal environment and perceiving health/wellbeing to worsen at above 28 °C (and below 15 °C). Symptoms experienced during hot weather included tiredness, shortness of breath, sleeplessness and dizziness, with coughs and colds, painful joints, shortness of breath and influenza experienced during cold weather. To express the influence of temperature and humidity on perceived health/wellbeing, a Temperature Humidity Health Index (THHI) was developed for this cohort. A health/wellbeing perception of “very good” is achieved between an 18.4 °C and 24.3 °C indoor operative temperature and a 55% relative humidity. The evidence from this research is used to inform guidelines about maintaining home environments to be conducive to the health/wellbeing of older people. Original publication at MDPI: https://doi.org/10.3390/atmos13010096 © 2022 by the authors. Licensee MDPI.
MULTIFILE
At a time when the population is ageing and most people choose to live in their own home for as long as possible, it is important to consider various aspects of supportive and comfortable environments for housing. This study, conducted in South Australia, aims to provide information about the links between the type of housing in which older people live, the weather and occupants’ heating and cooling behaviours as well as their health and well-being. The study used a Computer-Assisted Telephone Interviewing (CATI) system to survey 250 people aged 65 years and over who lived in their own home. The respondents were recruited from three regions representing the three climate zones in South Australia: semi-arid, warm temperate and temperate. The results show that while the majority of respondents reported being in good health, many lived in dwellings with minimal shading and no wall insulation and appeared to rely on the use of heaters and coolers to achieve thermally comfortable conditions. Concerns over the cost of heating and cooling were shared among the majority of respondents and particularly among people with low incomes. Findings from this study highlight the importance of providing information to older people, carers, designers and policy makers about the interrelationships between weather, housing design, heating and cooling behaviours, thermal comfort, energy use and health and well-being, in order to support older people to age in place independently and healthily. https://doi.org/10.1016/j.buildenv.2019.03.023 LinkedIn: https://www.linkedin.com/in/jvhoof1980/
MULTIFILE
Sensors in offices mainly measure environmental data, missing qualitative insights into office workers’ perceptions. This opens the opportunity for active individual participation in data collection. To promote reflection on office well-being while overcoming experience sampling challenges in terms of privacy, notification, and display overload, and in-the-moment data collection, we developed Click-IO. Click-IO is a tangible, privacy-sensitive, mobile experience sampling tool that collects contextual information. We evaluated Click-IO for 20-days. The system enabled real-time reflections for office workers, promoting self-awareness of their environment and well-being. Its non-digital design ensured privacy-sensitive feedback collection, while its mobility facilitated in-the-moment feedback. Based on our findings, we identify design recommendations for the evelopment of mobile experience sampling tools. Moreover, the integration of contextual data with environmental sensor data presented a more comprehensive understanding of individuals’ experiences. This research contributes to the development of experience sampling tools and sensor integration for understanding office well-being.
DOCUMENT
In face of climate change and urbanization, the need for thermally comfortable outdoor urban spaces is increasing. In the design of the thermally comfortable urban spaces and decision making about interventions that enhance thermal comfort, scientists and professionals that work for cities use meteorological measurements and models. These measurements can be done by professional and accurate meteorological sensors, but also by simpler mobile instruments such as the easy-to-use Kestrel weather meters. In using these simple type of sensors, it is important to know what the performance of these sensors is for outdoor thermal comfort assessments and how they can be used by scientists and professionals in decision making about urban designs that enhance thermal comfort.To answer these questions, we carried out three experiments in the summer of 2020 in Amsterdam, in which we tested the 11 Kestrel 5400 heat stress sensors and assessed the performance of this equipment for thermal comfort studies. We concluded that Kestrel sensors can be used very well for assessing differences in air temperature and PET (Physiological Equivalent Temperature) between outdoor built environments. For both air temperature and PET, the RMSE between the 11 Kestrel sensors was 0.5 °C maximum when measuring the same conditions. However, Kestrel sensors that were placed in the sun without a wind vane mounted to the equipment showed large radiation errors. In this case, temperature differences up to 3.4 °C were observed compared to Kestrels that were shaded. The effect of a higher air temperature on the PET calculation is, however, surprisingly small. A sensitivity analysis showed that an increase of 3 °C in the air temperature results in a maximal PET reduction of 0.5 °C. We concluded that Kestrel sensors can very well be used for assessing differences between air temperatures and PET between two locations and assessing the thermal effects of urban designs, but care should be taken when air temperature measurements are carried out in the sun. We always recommend using the wind vanes to deviate from high radiant input orientations for the temperature sensor, and placing the stations next to each other at the beginning and at the end of the measurements to check whether the stations actually measure the same values. Any differences can be corrected afterwards.
DOCUMENT
Urban green and shading are adaptation measures that reduce urban heat. This is evident from meteorological measurements and investigations with surveys and has been described in many papers (e.g. Klemm et al., 2015). The cooling effect of these adaptation measures is reflected by lower air temperatures and an improved thermal comfort. Shading and urban green are also experienced as cooler than impervious urban spaces without vegetation or shading. However, the cooling effect of water bodies in cities, such as rivers, lakes, ponds, canals,fountains, is not clear yet (Steeneveld et al., 2014). Several studies show that the cooling effect of water bodies in cities is small, or can even be a source of heat during nighttime. The effect depends on the characteristics of the water body and the meteorological conditions. Nevertheless, water is often mentioned as an adaptation measure to reduce urban heat.To support urban professionals in designing cooler urban environments by using water bodies, we investigated in more detail how different water types in msterdam contribute to cooling the environment. During five summer days, we measured the cooling effect of five different water bodies: a pond, a fountain, a canal, and two rivers. We used measurements from mobile weather stations (air temperature, relative humidity, wind speed, global radiation and globe temperature) and collected almost 1000 surveys near the water bodies and a reference location. From these data, we could determine the effect of the water bodies on air temperature, thermal comfort and thermal sensation. The research question that we tried to answer with this study is: What is the cooling effect of different water types in the city of Amsterdam during hot days? The study has been carried out within the framework of a Dutch research project ‘Urban climate resilience – Turning climate adaptation into practice’ and supports urban professionals to decide on the right adaptation measures to reduce urban heat.
DOCUMENT
Academy of the People is a project which ran from December 2012 to June 2013, in which students from Minerva Art Academy in Groningen developed critical site-specific artworks in the social environments of their research interests: in primary schools,religious centres and even police stations. In each of these environments, our understanding of art changes. This shows us that the range of possible art worlds is equal to the will of the artists to create them.
DOCUMENT
The ambition of a transition to a sustainable society brings forth the dual challenge to preserve historical buildings and simultaneously improve the energy performance of our built environment. While engineers claim that a dramatic reduction of energy use in the built environment is feasible, it has proven to be a difficult and twisting road.In this paper we focus on historical buildings, where difficulties of energy reduction are paramount, as such buildings provide local identity and a connection to our past. It is a EU policy objective to conserve and redesign heritage buildings like prisons, military barracks, factories, stations, and schools. Such redesign should also ensure reduction of energy use without compromising historical identity. In this paper we conceptually and empirically investigate how the two conflicting aspirations unfold. In particular we elaborate the obduracy and scripts of buildings, to clarify how they resist change and invite a specific use. We analyse the tensions between identity and energy conservation in a case study of a restoration project in Franeker. This buildinghas recently undergone a restoration, with energy efficiency as one of its goals.Scripts and networks are traced by a combination of methods, such as studyinglayout, materials and building history, and qualitative interviews with restoration architects and users. We identified three types of strategies to conserve identity and energy: design strategies; identity strategies and network strategies. Such strategies are also relevant for other efforts where conservation and innovation have to be reconciled.
DOCUMENT
This chapter reports on the findings of a research project aimed at investigating the actual thermal environment of the housing of older occupants (aged 65 or over) in South Australia. The study documented their thermal preferences and behaviours during hot and cold weather and relationships to their well-being and health. Information was collected in three phases, a telephone survey, focus group discussions and detailed house environmental monitoring that employed an innovative data acquisition system to measure indoor conditions and record occupant perceptions and behaviours. The research covered three climate zones and extended over a nine-month period. The detailed monitoring involved a total of 71 participants in 57 houses. More than 10,000 comfort/well-being questionnaire responses were collected with more than 1,000,000 records of indoor environmental conditions. Analysis of the data shows the relationships between thermal sensation and self-reported well-being/health and the various adaptive strategies the occupants employ to maintain their preferred conditions. Findings from the research were used to develop targeted recommendations and design guidelines intended for older people with specific thermal comfort requirements and more broadly advice for architects, building designers and policymakers. Original publication at: Routledge Handbook of Resilient Thermal Comfort Chapter 7: https://doi.org/10.4324/9781003244929-10
MULTIFILE
Car use in the sprawled urban region of Noord‐Brabant is above the Dutch average. Does this reflect car dependency due to the lack of competitive alternative modes? Or are there other factors at play, such as differences in preferences? This article aims to determine the nature of car use in the region and explore to what extent this reflects car dependency. The data, comprising 3,244 respondents was derived from two online questionnaires among employees from the High‐Tech Campus (2018) and the TU/e‐campus (2019) in Eindhoven. Travel times to work by car, public transport, cycling, and walking were calculated based on the respondents’ residential location. Indicators for car dependency were developed using thresholds for maximum commuting times by bicycle and maximum travel time ratios between public transport and car. Based on these thresholds, approximately 40% of the respondents were categorised as car‐dependent. Of the non‐car‐dependent respondents, 31% use the car for commuting. A binomial logit model revealed that higher residential densities and closer proximity to a railway station reduce the odds of car commuting. Travel time ratios also have a significant influence on the expected directions. Mode choice preferences (e.g., comfort, flexibility, etc.) also have a significant, and strong, impact. These results highlight the importance of combining hard (e.g., improvements in infrastructure or public transport provi-sion) and soft (information and persuasion) measures to reduce car use and car dependency in commuting trips.
MULTIFILE
