The COVID-19 lockdowns showed that working from home and conducting meetings online can change mobility patterns and needs substantially. This global pandemic may have also substantially changed mobility patterns on the long-term and therefore, also the need of electric vehicle charging infrastructure. Charging need dropped significantly but also changed the distribution of the load on the electricity grid throughout the day. This paper analyses changes in electric charging for different user groups during different phases of the pandemic to assess the long-term effects on EV charging needs.
In this paper we present a modification to the Dynamic Assignment Vehicle Routing Problem. This problem arises in parcel to vehicle assignment where the destination of the parcels is not known up to the assignment of the parcel to a delivering route. The assignment has to be done immediately without the possibility of re-assignment afterwards. We extend the original problem with a generalisation of the definition of capacity, with an unknown workload, unknown number of parcels per day, and a generalisation of the objective function. This new problem is defined and various methods are proposed to come to an efficient solution method.
Underutilised charging stations can be a bottleneck in the swift transition to electric mobility. This study is the first to research cooperative behaviour at public charging stations as a way to address improved usage of public charging stations. It does so by viewing public charging stations as a common-pool resource and explains cooperative behaviour from an evolutionary perspective. Current behaviour is analysed using a survey (313 useful responses) and an analysis of large dataset (2.1 million charging sessions) on the use of public charging infrastructure in Amsterdam, The Netherlands. In such a way it identifies the potential, drivers and possible obstacles that electric vehicle drivers experience when cooperating with other drivers to optimally make use of existing infrastructure. Results show that the intention to show direct reciprocal charging behaviour is high among the respondents, although this could be limited if the battery did not reach full or sufficient state-of-charge at the moment of the request. Intention to show direct reciprocal behaviour is mediated by kin and network effects.
MULTIFILE
Agricultural/horticultural products account for 9% of Dutch gross domestic product. Yearly expansion of production involves major challenges concerning labour costs and plant health control. For growers, one of the most urgent problems is pest detection, as pests cause up to 10% harvest loss, while the use of chemicals is increasingly prohibited. For consumers, food safety is increasingly important. A potential solution for both challenges is frequent and automated pest monitoring. Although technological developments such as propeller-based drones and robotic arms are in full swing, these are not suitable for vertical horticulture (e.g. tomatoes, cucumbers). A better solution for less labour intensive pest detection in vertical crop horticulture, is a bio-inspired FW-MAV: Flapping Wings Micro Aerial Vehicle. Within this project we will develop tiny FW-MAVs inspired by insect agility, with high manoeuvrability for close plant inspection, even through leaves without damage. This project focusses on technical design, testing and prototyping of FW-MAV and on autonomous flight through vertically growing crops in greenhouses. The three biggest technical challenges for FW-MAV development are: 1) size, lower flight speed and hovering; 2) Flight time; and 3) Energy efficiency. The greenhouse environment and pest detection functionality pose additional challenges such as autonomous flight, high manoeuvrability, vertical take-off/landing, payload of sensors and other equipment. All of this is a multidisciplinary challenge requiring cross-domain collaboration between several partners, such as growers, biologists, entomologists and engineers with expertise in robotics, mechanics, aerodynamics, electronics, etc. In this project a co-creation based collaboration is established with all stakeholders involved, integrating technical and biological aspects.
Logistics represents around 10-11% of global CO2 emissions, around 75% of which come from road freight transport. ‘The European Green Deal’ is calling for drastic CO2 reduction in this sector. This requires advanced and very expensive technological innovations; i.e. re-design of vehicle units, hybridization of powertrains and automatic vehicle technology. Another promising way to reach these environmental ambitions, without excessive technological investments, is the deployment of SUPER ECO COMBI’s (SEC). SEC is the umbrella name for multiple permutations of 32 meter, 70 tons, road-train combinations that can carry the payload-equivalent of 2 normal tractor-semitrailer combinations and even 3 rigid trucks. To fully deploy a SEC into the transport system the compliance with the existing infrastructure network and safety needs to be guaranteed; i.e. to deploy a specific SEC we should be able to determine which SEC-permutation is most optimal on specific routes with respect to regulations (a.o. damage to the pavement/bridges), the dimensions of specific infrastructures (roundabouts, slopes) and safety. The complexity of a SEC compared to a regular truck (double articulation, length) means that traditional optimisation methods are not applicable. The aim of this project is therefore to develop a first methodology enabling the deployment of the optimal SEC permutation. This will help transport companies (KIEM: Ewals) and trailer manufactures (KIEM: Emons) to invest in the most suitable designs for future SEC use. Additionally the methodology will help governments to be able to admit specific SEC’s to specific routes. The knowledge gained in this project will be combined with the knowledge of the broader project ENVELOPE (NWA-IDG). This will be the start of broader research into an overall methodology of deploying optimal vehicle combinations and a new regulatory framework. The knowledge will be used in master courses on vehicle dynamics.
To meet the European Green Deal, new CO2 emission standards for Heavy-Duty-Vehicles (HDV) have been set. The amended Regulation EU-2019/1242 has a wider scope, covering not only lorries but also trailers. From 2030 on (semi-)trailers must reduce their emissions by 10%, even though trailers generally do not emit any CO2-emissions. But how can a trailer save CO2? To calculate emissions, the European Commission has developed VECTO, the Vehicle Energy Consumption Calculation TOol. It is a standardized framework designed to determine fuel consumption and CO2-emissions of HDVs. Analysis show that the two main focus points for CO2 reduction, based on VECTO, are weight reduction and improved aerodynamics. However, equipping trailers with aerodynamic devices or making them lighter isn’t straightforward. Trailers lead a rough life and the industry is adapted to the current trailer designs. Lightweight constructions might harm the lifetime of a trailer and trailers with protruding aerodynamic parts won’t fit on a train anymore. Besides, both solutions have a major influence on the vehicle (roll-over) stability and therefore safety. It is not that evident for a trailer manufacturer to design a (new) trailer that 1) fulfills the CO2 regulations, 2) complies with the constructional requirements and 3) remains safe and stable. This 3-step-approach is really missing for trailer manufacturers, and this is endorsed by Burgers Carrosserie: “How can we validate (upfront) that the trailer is still as “strong” and “safe” if we apply the weight reduction that shows sufficient CO2 saving in VECTO?”. The answer was simple, it isn’t. It is the aim of Trenergy to develop this 3-step approach with complementary simulation tools, where trailer manufacturers can validate their design(s) for CO2 Savings, Construction and Safety. It is intended to make the developed models/tools open source for the Logistic Industry.
