As part of the theme 13 and 14, our group have to realize a project in the field of the renewable energy. This project consist of the design of a bio-digester for the canteen of Zernikeplein. Gert Hofstede is our client. To produce energy, a bio-digester uses the anaerobic digestion, which is made of many processes where bacteria break down biodegradable material in the absence of oxygen. The organic garbage, like kitchen waste, are fed into the bio-digester with a small amount of water. We designed the bio-digester according to the specifications of our client, our teachers, some companies we met, and our own ideas. The bio-digester is built by ourselves, even if we ordered some parts of it. Therefore, this project made us creative because we had to design and to build. It also permitted us to use our skills gained the previous years of our studies.
DOCUMENT
Uit het rapport: "Deze onderzoeksagenda is tot stand gebracht door de lectoren die samenwerken in het Nationaal Lectoren Platform Urban Energy. Alle betrokkenen bij het platform zijn in staat gesteld om bij te dragen aan de tekst, speciale dank daarbij voor de bijdragen en commentaren vanuit de TKI Urban Energy en de HCA topsector Energie."
DOCUMENT
Power-to-gas technologies are considered to be part of the future energy sys- tem, but their viability and applicability need to be assessed. Therefore, models for the viability of farm-scale bio-power-to-methane supply chains to produce green gas were analysed in terms of levelised cost of energy, energy efficiency and saving of greenhouse gas emission. In bio-power-to-methane, hydrogen from electrolysis driven by surplus renewable electricity and carbon dioxide from biogas are converted to methane by microbes in an ex situ trickle-bed reactor. Such bio-methanation could replace the current upgrading of biogas to green gas with membrane technology. Four scenarios were compared: a refer- ence scenario without bio-methanation (A), bio-methanation (B), bio-methanation combined with membrane upgrading (C) and the latter with use of renewable energy only (all-green; D). The reference scenario (A) has the lowest costs for green gas production, but the bio-methanation scenarios (B-D) have higher energy efficiencies and environmental benefits. The higher costs of the bio-methanation scenarios are largely due to electrolysis, whereas the environmental benefits are due to the use of renewable electricity. Only the all- green scenario (D) meets the 2026 EU goal of 80% reduction of greenhouse gas emissions, but it would require a CO2 price of 200 € t−1 to achieve the levelised cost of energy of 65 €ct Nm−3 of the reference scenario. Inclusion of the intermittency of renewable energy in the scenarios substantially increases the costs. Further greening of the bio-methanation supply chain and how intermittency is best taken into account need further investigation.
DOCUMENT
The energy efficiency and sustainability of an anaerobic green gas production pathway was evaluated, taking into account five biomass feedstocks, optimization of the green gas production pathway, replacement of current waste management pathways by mitigation, and transport of the feedstocks. Sustainability is expressed by three main factors: efficiency in (Process) Energy Returned On Invested (P)EROI, carbon footprint in Global Warming Potential GWP(100), and environmental impact in EcoPoints. The green gas production pathway operates on a mass fraction of 50% feedstock with 50% manure. The sustainability of the analyzed feedstocks differs substantially, favoring biomass waste flows over, the specially cultivated energy crop, maize. The use of optimization, in the shape of internal energy production, green gas powered trucks, and mitigation can significantly improve the sustainability for all feedstocks, but favors waste materials. Results indicate a possible improvement from an average (P)EROI for all feedstocks of 2.3 up to an average of 7.0 GJ/GJ. The carbon footprint can potentially be reduced from an average of 40 down to 18 kgCO2eq/GJ. The environmental impact can potentially be reduced from an average of 5.6 down to 1.8 Pt/GJ. Internal energy production proved to be the most effective optimization. However, the use of optimization aforementioned will result in les green gas injected into the gas grid as it is partially consumed internally. Overall, the feedstock straw was the most energy efficient, where the feedstock harvest remains proved to be the most environmentally sustainable. Furthermore, transport distances of all feedstocks should not exceed 150 km or emissions and environmental impacts will surpass those of natural gas, used as a reference. Using green gas as a fuel can increase the acceptable transportation range to over 300 km. Within the context aforementioned and from an energy efficiency and sustainable point of view, the anaerobic digestion process should be utilized for processing locally available waste feedstocks with the added advantage of producing energy, which should first be used internally for powering the green gas production process.
DOCUMENT
Anaerobic digestion (AD) can play an important role in achieving renewable goals set within the Netherlands which strives for 40 PJ bio-energy in the year 2020. This research focusses on reaching this goal with locally available biomass waste flows (e.g. manures, grasses, harvest remains, municipal organic wastes). Therefore, the bio-energy yields, process efficiency and environmental sustainability are analyzed for five municipalities in the northern part Netherlands, using three utilization pathways: green gas production; combined heat and power; and waste management. Results indicate that the Dutch goal cannot be filled through the use of local biomass waste streams, which can only reach an average of 20 PJ. Furthermore renewable goals and environmental sustainability do not always align. Therefore, understanding of the absolute energy and environmental impact of biogas production pathways is required to help governments form proper policies, to promote an environmentally and social sustainable energy system.
DOCUMENT
Anaerobic digestion (AD) can play an important role in achieving the renewable energy goals set within the European Union. Within this article the focus is placed on reaching the Dutch local renewable production goal set for the year 2020 with locally available biomass waste flows, avoiding intensive farming and long transport distances of biomass and energy carriers. The bio-energy yields, efficiency and environmental sustainability are analyzed for five municipalities in the northern part of the Netherlands, using three utilization pathways: green gas production, combined heat and power, and waste management. Literature has indicated that there is sufficient bio-energy potential in local waste streams to reach the aforementioned goal. However, the average useful energy finally produced by the AD production pathway is significantly lower, often due to poor quality biomass and difficult harvesting conditions. Furthermore, of the potential bio-energy input in the three utilization pathways considered in this article, on average: 73% can be extracted as green gas; 57% as heat and power; and 44% as green gas in the waste management pathway. This demonstrates that the Dutch renewable production goal cannot be reached. The green gas utilization pathway is preferable for reaching production goals as it retains the highest amount of energy from the feedstock. However, environmental sustainability favors the waste management pathway as it has a higher overall efficiency, and lower emissions and environmental impacts. The main lessons drawn from the aforementioned are twofold: there is a substantial gap between bio-energy potential and net energy gain; there is also a gap between top–down regulation and actual emission reduction and sustainability. Therefore, a full life cycle-based understanding of the absolute energy and environmental impact of biogas production and utilization pathways is required to help governments to develop optimal policies serving a broad set of sustainable objectives. Well-founded ideas and decisions are needed on how best to utilize the limited biomass availability most effectively and sustainably in the near and far future, as biogas can play a supportive role for integrating other renewable sources into local decentralized energy systems as a flexible and storable energy source.
DOCUMENT
The increase in renewable energy sources will require an increase in the operational flexibility of the grid, due to the intermittent nature of these sources. This can be achieved for the gas and the electricity grid, which are integrated by means of power-to-gas and vice versa, by applying gas and other energy storages. Because renewables are applied on a decentralized scale level and syngas and biogas are produced at relatively low pressures, we study the application of a decentralized (bio)gas storage system combined withMicro Turbine Technology (MTT), Compressed Air Energy Storage (CAES) and Thermal Energy Storage (TES) units, which are designed to optimize energy efficiency.In this study we answer the following research questions:a. What is the techno-economical feasibilty of applying a decentralized (bio)gas storage with a MTT/CAES/TES system to balance the integrated renewable energy network?b. How should the decentralized (bio)gas storage with MTT/CAES/TES system be designed, so that the energy efficient application in such networks is optimized?Note that:c. We verify the calculations for the small scale MTT unit with measurements on our proof-of-principle set-up of part of the system that includes two MTTs in parallel.Based on wind speed, irradiance patterns and electricity and heat demand patterns for a case of 100 households, we found the optimum dimensions for the decentralized (bio)gas storage based on guaranteed supply. We concluded that a decentralized (bio)gas storage of 85 000 Nm3 was needed to provide the heat demand. LNG was the most energy efficient storage technology for such dimensions.The use of (bio)gas directly in a CHP (P/Q ratio = 2/3) that was mainly heat driven, resulted in a continuous overproduction of electricity due to the dominant heat demand of the 100 households in the Netherlands.This does not leave any room for the increase in the application of PV and wind generators, nor is there a purpose for electricity storage.For that reason we will further investigate the application of a decentralized (bio)gas storage with MTT/CAES/TES as a solution to balance a renewable integrated network. Using an MTT in the system offers a more useful P/Q ratio for households of 1/5.
DOCUMENT
The Bio-P2G-program (Bio-Power to Gas) at the Hanze University of AppliedSciences evaluates the technologic feasibility of the biological reduction of carbondioxide with hydrogen to methane (biomethanation: 1 CO2 + 4 H2 -> CH4 + 2 H2O)Chemically, this process is known as the Sabatier reaction, but within anaerobicdigestion the biological methanation is catalyzed by a specific group ofmicroorganisms: the hydrogenotrophic methanogens.
DOCUMENT
Onderzoeksplan BIO P2G;- Het communiceren over vorderingen (en resultaten) van het BIO P2G onderzoek- Organiseren van 2 evenementen- Opstellen communicatie- en implementatieplan
DOCUMENT
Rationale: Diagnosis of sarcopenia in older adults is essential for early treatment in clinical practice. Bio-electrical impedanceanalysis (BIA) may be a valid means to assess appendicular lean mass (ALM) in older adults, but limited evidence is available.Therefore, we aim to evaluate the validity of BIA to assess ALM in older adults.Methods: In 215 community dwelling older adults (age ≥ 55 years), ALM was measured by BIA (Tanita MC-780; 8-points) andcompared with dual-energy X-ray absorptiometry (DXA, Hologic Discovery A) as reference. Validity for assessing absolute values ofALM was evaluated by: 1) bias (mean difference), 2) percentage of accurate predictions (within 5% of DXA values), 3) individualerror (root mean squared error (RMSE), mean absolute deviation), 4) limits of agreement (Bland-Altman analysis). For diagnosis oflow ALM, the lowest quintile of ALM by DXA was used (below 21.4 kg for males and 15.4 for females). Sensitivity and specificityof detecting low ALM by BIA were assessed.Results: Mean age of the subjects was 71.9 ± 6.4, with a BMI of 25.8 ± 4.2 kg/m2, and 70% were females. BIA slightlyunderestimated ALM compared to DXA with a mean bias of -0.6 ± 0.2 kg. The percentage accurate predictions was 54% withRMSE 1.6 kg and limits of agreements -3.0 – +1.8 kg. Sensitivity was 79%, indicating that 79% of subjects with low ALMaccording to DXA also had low ALM with the BIA. Specificity was 90%, indicating that 90% of subjects with ‘no low’ ALMaccording to DXA also had ‘no low’ ALM with the BIA.Conclusions: This comparison showed a poor validity of BIA to assess absolute values of ALM, but a reasonable sensitivity andspecificity to diagnose a low level of ALM in community-dwelling older adults in clinical practice.
DOCUMENT
