A time- and space-resolved deactivation study on the conversion of glycerol to aromatics over H-ZSM-5 was performed. For this purpose, glycerol was vaporized/pyrolyzed in a pyrolysis section followed by a catalytic aromatization step. Benchmark performance showed an induction period of ca. 20 min, followed by a rather constant BTX yield of ca. 25.4 ± 2.2C.% for 3–4 h time on stream (TOS). Subsequently, a rapid drop in BTX yield was observed due to catalyst deactivation. Severe coking leads to coverage of catalyst surface area and blockage of micropores, particularly at the entrance of the catalyst bed at short TOS, indicating the presence of an axial coke gradient in the fixed bed reactor. At longer TOS, coke was formed throughout the bed and negligible BTX yield was shown to be associated with the presence of coke at all bed positions. Besides coking, the acidity of the catalyst was also reduced, and dealumination occurred, both with a similar time–space evolution. The results were explained by a conversion-zone migration model, which includes a deactivation zone (with severely coked catalyst), a conversion zone (BTX formation), and an induction zone (a.o. (de-)alkylation reactions), and describes the time- and space-resolved evolution of coking and relevant changes in other catalyst characteristics.
Problems of energy security, diversification of energy sources, and improvement of technologies (including alternatives) for obtaining motor fuels have become a priority of science and practice today. Many scientists devote their scientific research to the problems of obtaining effective brands of alternative (reformulated) motor fuels. Our scientific school also deals with the problems of the rational use of traditional and alternative motor fuels.This article focused on advances in motor fuel synthesis using natural, associated, or biogas. Different raw materials are used for GTL technology: biomass, natural and associated petroleum gases. Modern approaches to feed gas purification, development of Gas-to-Liquid-technology based on Fischer–Tropsch synthesis, and liquid hydrocarbon mixture reforming are considered.Biological gas is produced in the process of decomposition of waste (manure, straw, grain, sawdust waste), sludge, and organic household waste by cellulosic anaerobic organisms with the participation of methane fermentation bacteria. When 1 tonne of organic matter decomposes, 250 to 500–600 cubic meters of biogas is produced. Experts of the Bioenergy Association of Ukraine estimate the volume of its production at 7.8 billion cubic meters per year. This is 25% of the total consumption of natural gas in Ukraine. This is a significant raw material potential for obtaining liquid hydrocarbons for components of motor fuels.We believe that the potential for gas-to-liquid synthetic motor fuels is associated with shale and coalfield gases (e.g. mine methane), methane hydrate, and biogas from biomass and household waste gases.
The present invention relates to a novel process for the preparation of low molecular weight aromatic compounds such as benzene, toluene, and xylenes (BTX) from plastics. Provided is a thermo-catalytic pyrolysis process for the preparation of aromatic compounds from a feed stream comprising plastic, comprising the steps of: a) subjecting a feed stream comprising a plastic to a pyrolysis treatment at a pyrolysis temperature in the range of 600-1000°C to produce pyrolysis vapors; b) optionally cooling the pyrolysis vapors to a temperature that is below the pyrolysis temperature; c) contacting the vaporous phase with an aromatization catalyst at an aromatization temperature in the range of 450 - 700 °C, which aromatization temperature is at least 50°C lower than the pyrolysis temperature, in a catalytic conversion step to yield a conversion product comprising aromatic compounds; and d) optionally recovering the aromatic compounds from the conversion product.
LINK
Paper sludge contains papermaking mineral additives and fibers, which could be reused or recycled, thus enhancing the circularity. One of the promising technologies is the fast pyrolysis of paper sludge, which is capable of recovering > 99 wt.% of the fine minerals in the paper sludge and also affording a bio-liquid. The fine minerals (e.g., ‘circular’ CaCO3) can be reused as filler in consumer products thereby reducing the required primary resources. However, the bio-liquid has a lower quality compared to fossil fuels, and only a limited application, e.g., for heat generation, has been applied. This could be significantly improved by catalytic upgrading of the fast pyrolysis vapor, known as an ex-situ catalytic pyrolysis approach. We have recently found that a high-quality bio-oil (mainly ‘bio-based’ paraffins and low-molecular-weight aromatics, carbon yield of 21%, and HHV of 41.1 MJ kg-1) was produced (Chem. Eng. J., 420 (2021), 129714). Nevertheless, catalyst deactivation occurred after a few hours’ of reaction. As such, catalyst stability and regenerability are of research interest and also of high relevance for industrial implementation. This project aims to study the potential of the add-on catalytic upgrading step to the industrial fast pyrolysis of paper sludge process. One important performance metric for sustainable catalysis in the industry is the level of catalyst consumption (kgcat tprod-1) for catalytic pyrolysis of paper sludge. Another important research topic is to establish the correlation between yield and selectivity of the bio-chemicals and the catalyst characteristics. For this, different types of catalysts (e.g., FCC-type E-Cat) will be tested and several reaction-regeneration cycles will be performed. These studies will determine under which conditions catalytic fast pyrolysis of paper sludge is technically and economically viable.
