This report describes the creation and use of a database for energy storage technologies which was developed in conjunction with Netbeheer Nederland and the Hanze University of Applied Sciences. This database can be used to make comparisons between a selection of storage technologies and will provide a method for ranking energy storage technology suitability based on the desired application requirements. In addition, this document describes the creation of the energy storage label which contains detailed characteristics for specific storage systems. The layout of the storage labels enables the analysis of different storage technologies in a comprehensive, understandable and comparative manner. A sampling of storage technology labels are stored in an excel spreadsheet and are also compiled in Appendix I of this report; the storage technologies represented here were found to be well suited to enable flexibility in energy supply and to potentially provide support for renewable energy integration [37] [36]. The data in the labels is presented on a series of graphs to allow comparisons of the technologies. Finally, the use and limitations of energy storage technologies are discussed. The results of this research can be used to support the Dutch enewable Energy Transition by providing important information regarding energy storage in both technically detailed and general terms. This information can be useful for energy market parties in order to analyze the role of storage in future energy scenarios and to develop appropriate strategies to ensure energy supply.
MULTIFILE
This report focuses on the feasibility of the power-to-ammonia concept. Power-to-ammonia uses produced excess renewable electricity to electrolyze water, and then to react the obtained hydrogen with nitrogen, which is obtained through air separation, to produce ammonia. This process may be used as a “balancing load” to consume excess electricity on the grid and maintain grid stability. The product, ammonia, plays the role of a chemical storage option for excess renewable energy. This excess energy in the form of ammonia can be stored for long periods of time using mature technologies and an existing global infrastructure, and can further be used either as a fuel or a chemical commodity. Ammonia has a higher energy density than hydrogen; it is easier to store and transport than hydrogen, and it is much easier to liquefy than methane, and offers an energy chain with low carbon emissions.The objective of this study is to analyze technical, institutional and economic aspects of power-to-ammonia and the usage of ammonia as a flexible energy carrier.
DOCUMENT
Wind and solar power generation will continue to grow in the energy supply of the future, but its inherent variability (intermittency) requires appropriate energy systems for storing and using power. Storage of possibly temporary excess of power as methane from hydrogen gas and carbon dioxide is a promising option. With electrolysis hydrogen gas can be generated from (renewable) power. The combination of such hydrogen with carbon dioxide results in the energy carrier methane that can be handled well and may may serve as carbon feedstock of the future. Biogas from biomass delivers both methane and carbon dioxide. Anaerobic microorganisms can make additional methane from hydrogen and carbon dioxide in a biomethanation process that compares favourably with its chemical counterpart. Biomethanation for renewable power storage and use makes appropriate use of the existing infrastructure and knowledge base for natural gas. Addition of hydrogen to a dedicated biogas reactor after fermentation optimizes the biomethanation conditions and gives maximum flexibility. The low water solubility of hydrogen gas limits the methane production rate. The use of hollow fibers, nano-bubbles or better-tailored methane-forming microorganisms may overcome this bottleneck. Analyses of patent applications on biomethanation suggest a lot of freedom to operate. Assessment of biomethanation for economic feasibility and environmental value is extremely challenging and will require future data and experiences. Currently biomethanation is not yet economically feasible, but this may be different in the energy systems of the near future.
DOCUMENT
The growing energy demand and environmental impact of traditional sources highlight the need for sustainable solutions. Hydrogen produced through water electrolysis, is a flexible and clean energy carrier capable of addressing large-electricity storage needs of the renewable but intermittent energy sources. Among various technologies, Proton Exchange Membrane Water Electrolysis (PEMWE) stands out for its efficiency and rapid response, making it ideal for grid stabilization. In its core, PEMWEs are composed of membrane electrode assemblies (MEA), which consist of a proton-conducting membrane sandwiched between two catalyst-coated electrodes, forming a single PEMWE cell unit. Despite the high efficiency and low emissions, a principal drawback of PEMWE is the capital cost due to high loading of precious metal catalysts and protective coatings. Traditional MEA catalyst coating methods are complex, inefficient, and costly to scale. To circumvent these challenges, VSParticle developed a technology for nanoparticle film production using spark ablation, which generates nanoparticles through high-voltage discharges between electrodes followed by an impaction printing module. However, the absence of liquids poses challenges, such as integrating polymeric solutions (e.g., Nafion®) for uniform, thicker catalyst coatings. Electrohydrodynamic atomization (EHDA) stands out as a promising technique thanks to its strong electric fields used to generate micro- and nanometric droplets with a narrow size distribution. Co-axial EHDA, a variation of this technique, utilizes two concentric needles to spray different fluids simultaneously.The ESPRESSO-NANO project combines co-axial EHDA with spark ablation to improve catalyst uniformity and performance at the nanometer scale by integrating electrosprayed ionomer nanoparticles with dry metal nanoparticles, ensuring better distribution of the catalyst within the nanoporous layer. This novel approach streamlines numerous steps in traditional synthesis and electrocatalyst film production which will address material waste and energy consumption, while simultaneously improve the electrochemical efficiency of PEMWEs, offering a sustainable solution to the global energy crisis.
Carbon dioxide (CO2) is the final waste product for all carbon-containing products. Its reuse will partly mitigate climate change and, in addition, provide a valuable feedstock for fuels and chemicals. Zuyd University of Applied Sciences (ZUYD), Innosyn B.V., and Chemtrix B.V. will develop a flow reactor for photochemical reactions with gases conducted at high pressure. This reactor is the necessary first development towards artificial photosynthesis: the connection of hydrogen (H2) to the ultimate waste product CO2 to store energy in a chemical bond, in order to produce so-called solar fuels and C1-chemicals/products. With an increasing amount of renewables in the energy system, energy storage becomes increasingly important to continuously match supply and demand. In a cooperation between three ZUYD research groups with Chemtrix B.V. and Innosyn B.V., multiple cost-efficient reactor designs for this flow reactor will be analyzed and two designs will be selected to be implemented by small extensions of existing equipment. Simultaneously, two appropriate test re-actions involving a gas (E-Z isomerization followed by hydrogenation) and with a CO2 analogue (a hydrogenation of a carboxylic acid) will be developed to be conducted in the reactor when the con-struction has been finished. We aim to disseminate the new capabilities developed in this KIEM proposal by the project partners with respect to the new reactors to several selected stakeholders. Furthermore, to expand the project several options (SIA-RAAK and H2020 grants) will be explored.
Surface Active Agents, or surfactants, are chemicals which provide a surface (interface) activity when dispersed in liquids. They have different purposes, can be used as herbicides, anti-foaming agents, adhesives, cleaning agents and softeners. For cleaning purposes, their function is to alter (decrease) liquid surface tension. In this function they are ubiquitous in both industrial processes (cleaning of production equipment, storage vats, packaging lines, and cooking units either during the manufacturing process) and domestic applications. ProtoNeat proposes an alternative way to decrease water surface tension without adding chemicals (surfactants). This can be done by charging the water (producing protonically charged water) [2], i.e. positive and negative Bjerrum-defect like charges [3, 4]. This phenomenon was experimentally observed by Fuchs et al [5] in anolyte and catholyte when doing high voltage electrolysis of highly pure water during the so-called ‘floating water bridge’ experiment. The work done by the authors, when working with this “bridge”, showed that, in case of positive excess charge, the hydronium ions migrate to the surface [8] thereby significantly lowering the surface tension [9,10]. However, for how long this effect can be maintained and how effective it is to produce such water is still unknown. ProtoNeat wants to tackle these two questions and investigate whether a continuous production of protonically charged water as an environmentally friendly and sustainable cleaning agent is possible.
