Social work in the Netherlands is attracting an increasing number of Turkish and Moroccan Dutch professionals, mostly second-generation migrant women from a Muslim background. Inspired by Amartya Sen’s capability approach, this article presents the findings of a qualitative content analysis of 40 interviews with professionals by peers from the same background. The question is, what kind of professionals do these newly started social workers desire to be and what hindrances do they encounter? The professionals challenge the dominance of Western beliefs and values. This becomes tangible in their desires and constraints and especially in the process of choice.
DOCUMENT
Droop control is used for power management in DC grids. Based on the level of the DC grid voltage, the amount of power regulated to or from the appliance is regulated such, that power management is possible. The Universal 4 Leg is a laboratory setup for studying the functionality of a grid manager for power management. It has four independent outputs that can be regulated with pulse width modulation to control the power flow between the DC grid and for example, a rechargeable battery, solar panel or any passive load like lighting or heating.
DOCUMENT
This paper investigates how management accounting and control systems (operationalized by using Simons’ (1995a) levers of control framework) can be used as devices to support public value creation and as such it contributes to the literature on public value accounting. Using a mixed methods case study approach, including documentary analysis and semi-structured interviews, we found diverging uses of control systems in the Dutch university of applied sciences we investigated. While belief and interactive control systems are used intensively for strategy change and implementation, diagnostic controls were used mainly at the decentral level and seen as devices to make sure that operational and financial boundaries were not crossed. Therefore, belief and interactive control systems lay the foundation for the implementation of a new strategy, in which concepts of public value play a large role, using diagnostic controls to constrain actions at the operational level. We also found that whereas the institution wanted to have interaction with the external stakeholders, in daily practice this takes place only at the phase of strategy formulation, but not in the phase of intermediate strategy evaluation.
MULTIFILE
AIM: The aim of this study is to investigate the effect of a more 'community-oriented' baccalaureate nursing curriculum on students' intervention choice in community care.BACKGROUND: Following a healthcare shift with increased chronic diseases in an ageing patient population receiving care at home, nursing education is revising its curricula with new themes (e.g., self-management) on community care. Although it seems obvious that students incorporate these themes in their nursing care interventions, this is unclear. This study investigates the effect of a redesigned curriculum on students' care intervention choice in community nursing.DESIGN: A quasi-experimental quantitative study.METHODS: This study with an historic control group (n = 328; study cohorts graduating in 2016 and 2017; response rate 83 %) and an intervention group n = 152; graduating in 2018; response rate 80 %) was performed at a University of Applied Sciences in the Netherlands. The intervention group experienced a curriculum-redesign containing five new themes related to community care (e.g., enhancing self-management, collaboration with the patients' social network, shared decision making, using health technology and care allocation). The primary outcome 'intervention choice in community nursing' was assessed with a specially developed vignette instrument 'Assessment of Intervention choice in Community Nursing' (AICN). Through multiple regression analyses we investigated the effect of the curriculum-redesign on students' intervention choice (more 'traditional' interventions versus interventions related to the five new themes). The control and intervention groups were compared on the number of interventions per theme and on the number of students choosing a theme, with a chi-square or T-test.RESULTS: Students who studied under the more community-oriented curriculum chose interventions related to the new themes significantly more often, F(1461) = 14.827, p = <0.001, R2 = .031. However, more traditional interventions are still favourite (although less in the intervention group): 74.5 % of the chosen interventions in the historic control group had no relation with the new curriculum-themes, vs. 71.3 % in the intervention group; p = .055).CONCLUSIONS: Students who experienced a more 'community-oriented' curriculum were more likely, albeit to a limited extent, to choose the new community care themes in their caregiving. Seeing this shift in choices as a step in the right direction, it can be expected that the community care field in the longer term will benefit from these better skilled graduates.
MULTIFILE
The application of DC grids is gaining more attention in office applications. Especially since powering an office desk would not require a high power connection to the main AC grid but could be made sustainable using solar power and battery storage. This would result in fewer converters and further advanced grid utilization. In this paper, a sustainable desk power application is described that can be used for powering typical office appliances such as computers, lighting, and telephones. The desk will be powered by a solar panel and has a battery for energy storage. The applied DC grid includes droop control for power management and can either operate stand-alone or connected to other DC-desks to create a meshed-grid system. A dynamic DC nano-grid is made using multiple self-developed half-bridge circuit boards controlled by microcontrollers. This grid is monitored and controlled using a lightweight network protocol, allowing for online integration. Droop control is used to create dynamic power management, allowing automated control for power consumption and production. Digital control is used to regulate the power flow, and drive other applications, including batteries and solar panels. The practical demonstrative setup is a small-sized desktop with applications built into it, such as a lamp, wireless charging pad, and laptop charge point for devices up to 45W. User control is added in the form of an interactive remote wireless touch panel and power consumption is monitored and stored in the cloud. The paper includes a description of technical implementation as well as power consumption measurements.
DOCUMENT
This report is the final report for the FPGA accelerated PID controller, part of the Distributed Control Systems project. This project runs within the Lectoraat Robotics and High Tech Mechatronics of Fontys Hogeschool Engineering Eindhoven. The Lectoraat has the goal to develop applicable knowledge to support education and industry. This knowledge is acquired with projects run in conjunction with the industry. The report will go into detail for the software designed for this project, not the hardware design. This report is intended for follow up students working on the Distributed Control Systems project. Within this report the assumption is made that the reader is at least familiar with the terms EtherCAT, FPGA, Linux and PID controllers. However for each part a small basic introduction is included. For readers looking for the accomplishments in this project, the results are in chapter six. Following are short descriptions of the chapters in this report. The first chapter will give a short introduction to the project. It talks about why the project was conceived, where the project was done and what the expected end result is. The second chapter, the problem definition, talks about how the project has been defined, what is included and what is not and how the customer expects the final product to function and look like. The third chapter details the methodology used during this project. All the research preformed for this project will be described in the forth chapter. This chapter goes into the research into the Xilinx Zynq 7000 chip, Beckhoff's EtherCAT system, how the Serial Peripheral Interface works and how a PID controller functions. Following in chapter five the design is expanded upon. First the toolchain for building for the Zynq chip is explained. This is followed by and explanation of the different software parts that have been designed. Finally chapters six and seven provide the results and the conclusions and recommendations for this project.
DOCUMENT
Summary Project objectives This study fits into a larger research project on logistics collaboration and outsourcing decisions. The final objective of this larger project is to analyze the logistics collaboration decision in more detail to identify thresholds in these decisions. To reach the overall objectives, the first step is to get a clearer picture on the chemical and logistics service providers industry, sectors of our study, and on logistics collaboration in these sectors. The results of this first phase are presented in this report. Project Approach The study consists of two parts: literature review and five case studies within the chemical industry. The literature covers three topics: logistics collaboration, logistics outsourcing and purchasing of logistics services. The five case studies are used to refine the theoretical findings of the literature review. Conclusions Main observations during the case studies can be summarized as follows: Most analyzed collaborative relationships between shippers and logistics service providers in the chemical industry are still focused on operational execution of logistics activities with a short term horizon. Supply management design and control are often retained by the shippers. Despite the time and cost intensive character of a logistics service buying process, shippers tendering on a very regular basis. The decision to start a new tender project should more often be based on an integral approach that includes all tender related costs. A lower frequency of tendering could create more stability in supply chains. Beside, it will give both, shippers and LSPs, the possibility to improve the quality of the remaining projects. Price is still a dominating decision criterion in selecting a LSP. This is not an issue as long as the comparison of costs is based on an integral approach, and when shippers balance the cost criterion within their total set of criteria for sourcing logistics services. At the shippers' side there is an increased awareness of the need of more solid collaboration with logistics service providers. Nevertheless, in many cases this increased awareness does not actually result in the required actions to establish more intensive collaboration. Over the last years the logistics service providers industry was characterized by low profit margins, strong fragmentation and price competition. Nowadays, the market for LSPs is changing, because of an increasing demand for logistics services. To benefit from this situation a more pro-active role of the service providers is required in building stronger relationships with their customers. They should pay more attention on mid and long term possibilities in a collaborative relation, in stead of only be focused on running the daily operation.
DOCUMENT
The user’s experience with a recommender system is significantly shaped by the dynamics of user-algorithm interactions. These interactions are often evaluated using interaction qualities, such as controllability, trust, and autonomy, to gauge their impact. As part of our effort to systematically categorize these evaluations, we explored the suitability of the interaction qualities framework as proposed by Lenz, Dieffenbach and Hassenzahl. During this examination, we uncovered four challenges within the framework itself, and an additional external challenge. In studies examining the interaction between user control options and interaction qualities, interdependencies between concepts, inconsistent terminology, and the entity perspective (is it a user’s trust or a system’s trustworthiness) often hinder a systematic inventory of the findings. Additionally, our discussion underscored the crucial role of the decision context in evaluating the relation of algorithmic affordances and interaction qualities. We propose dimensions of decision contexts (such as ‘reversibility of the decision’, or ‘time pressure’). They could aid in establishing a systematic three-way relationship between context attributes, attributes of user control mechanisms, and experiential goals, and as such they warrant further research. In sum, while the interaction qualities framework serves as a foundational structure for organizing research on evaluating the impact of algorithmic affordances, challenges related to interdependencies and context-specific influences remain. These challenges necessitate further investigation and subsequent refinement and expansion of the framework.
LINK
We are currently in a transition moving from a linear economy grounded on economic value maximization based on material transformation to a circular economy. Core of this transition is organising value preservation from various yet interlinked perspectives. The underlying fundamental shift is to move away from mere financial value maximization towards multiple value creation (WCED, 1987; Jonker, 2014; Raworth, 2017). This implies moving from mere economic value creation, to simultaneously and in a balanced way creating ecological and social value. A parallel development supporting this transition can be observed in accounting & control. Elkington (1994) introduced the triple bottom line (TBL) concept, referring to the economic, ecological and social impact of companies. The TBL should be seen more as a conceptual way of thinking, rather than a practical innovative accounting tool to monitor and control sustainable value (Rambaud & Richard, 2015). However, it has inspired accounting & control practitioners to develop accounting tools that not only aim at economic value (‘single capital’ accounting) but also at multiple forms of capital (‘multi capital’ accounting or integrated reporting). This has led to a variety of integrated reporting platforms such as Global Reporting Initiative (GRI), International Integrated Reporting Framework (IIRC), Dow Jones Sustainable Indexes (DJSI), True Costing, Reporting 3.0, etc. These integrated reporting platforms and corresponding accounting concepts, can be seen as a fundament for management control systems focussing on multiple value creation. This leads to the following research question: How are management control systems designed in practice to drive multiple value creation?
MULTIFILE
The built environment requires energy-flexible buildings to reduce energy peak loads and to maximize the use of (decentralized) renewable energy sources. The challenge is to arrive at smart control strategies that respond to the increasing variations in both the energy demand as well as the variable energy supply. This enables grid integration in existing energy networks with limited capacity and maximises use of decentralized sustainable generation. Buildings can play a key role in the optimization of the grid capacity by applying demand-side management control. To adjust the grid energy demand profile of a building without compromising the user requirements, the building should acquire some energy flexibility capacity. The main ambition of the Brains for Buildings Work Package 2 is to develop smart control strategies that use the operational flexibility of non-residential buildings to minimize energy costs, reduce emissions and avoid spikes in power network load, without compromising comfort levels. To realise this ambition the following key components will be developed within the B4B WP2: (A) Development of open-source HVAC and electric services models, (B) development of energy demand prediction models and (C) development of flexibility management control models. This report describes the developed first two key components, (A) and (B). This report presents different prediction models covering various building components. The models are from three different types: white box models, grey-box models, and black-box models. Each model developed is presented in a different chapter. The chapters start with the goal of the prediction model, followed by the description of the model and the results obtained when applied to a case study. The models developed are two approaches based on white box models (1) White box models based on Modelica libraries for energy prediction of a building and its components and (2) Hybrid predictive digital twin based on white box building models to predict the dynamic energy response of the building and its components. (3) Using CO₂ monitoring data to derive either ventilation flow rate or occupancy. (4) Prediction of the heating demand of a building. (5) Feedforward neural network model to predict the building energy usage and its uncertainty. (6) Prediction of PV solar production. The first model aims to predict the energy use and energy production pattern of different building configurations with open-source software, OpenModelica, and open-source libraries, IBPSA libraries. The white-box model simulation results are used to produce design and control advice for increasing the building energy flexibility. The use of the libraries for making a model has first been tested in a simple residential unit, and now is being tested in a non-residential unit, the Haagse Hogeschool building. The lessons learned show that it is possible to model a building by making use of a combination of libraries, however the development of the model is very time consuming. The test also highlighted the need for defining standard scenarios to test the energy flexibility and the need for a practical visualization if the simulation results are to be used to give advice about potential increase of the energy flexibility. The goal of the hybrid model, which is based on a white based model for the building and systems and a data driven model for user behaviour, is to predict the energy demand and energy supply of a building. The model's application focuses on the use case of the TNO building at Stieltjesweg in Delft during a summer period, with a specific emphasis on cooling demand. Preliminary analysis shows that the monitoring results of the building behaviour is in line with the simulation results. Currently, development is in progress to improve the model predictions by including the solar shading from surrounding buildings, models of automatic shading devices, and model calibration including the energy use of the chiller. The goal of the third model is to derive recent and current ventilation flow rate over time based on monitoring data on CO₂ concentration and occupancy, as well as deriving recent and current occupancy over time, based on monitoring data on CO₂ concentration and ventilation flow rate. The grey-box model used is based on the GEKKO python tool. The model was tested with the data of 6 Windesheim University of Applied Sciences office rooms. The model had low precision deriving the ventilation flow rate, especially at low CO2 concentration rates. The model had a good precision deriving occupancy from CO₂ concentration and ventilation flow rate. Further research is needed to determine if these findings apply in different situations, such as meeting spaces and classrooms. The goal of the fourth chapter is to compare the working of a simplified white box model and black-box model to predict the heating energy use of a building. The aim is to integrate these prediction models in the energy management system of SME buildings. The two models have been tested with data from a residential unit since at the time of the analysis the data of a SME building was not available. The prediction models developed have a low accuracy and in their current form cannot be integrated in an energy management system. In general, black-box model prediction obtained a higher accuracy than the white box model. The goal of the fifth model is to predict the energy use in a building using a black-box model and measure the uncertainty in the prediction. The black-box model is based on a feed-forward neural network. The model has been tested with the data of two buildings: educational and commercial buildings. The strength of the model is in the ensemble prediction and the realization that uncertainty is intrinsically present in the data as an absolute deviation. Using a rolling window technique, the model can predict energy use and uncertainty, incorporating possible building-use changes. The testing in two different cases demonstrates the applicability of the model for different types of buildings. The goal of the sixth and last model developed is to predict the energy production of PV panels in a building with the use of a black-box model. The choice for developing the model of the PV panels is based on the analysis of the main contributors of the peak energy demand and peak energy delivery in the case of the DWA office building. On a fault free test set, the model meets the requirements for a calibrated model according to the FEMP and ASHRAE criteria for the error metrics. According to the IPMVP criteria the model should be improved further. The results of the performance metrics agree in range with values as found in literature. For accurate peak prediction a year of training data is recommended in the given approach without lagged variables. This report presents the results and lessons learned from implementing white-box, grey-box and black-box models to predict energy use and energy production of buildings or of variables directly related to them. Each of the models has its advantages and disadvantages. Further research in this line is needed to develop the potential of this approach.
DOCUMENT
