The built environment accounts for approximately 30-40% of the total energy consumption in the Netherlands and Germany (RVO, 2015). The INTERREG project Cleantech Energy Crossing therefore aims to facilitate the energy transition in this area by promoting cross-border collaboration. Through the realization of various innovations and new technological products, this project wants to make an important contribution in achieving the climate targets of the Netherlands (-20% CO2 emissions to 2020) and North Rhine-Westphalia (-25% CO2 emissions to 2020).
MULTIFILE
The government of Ukraine has adopted the Renewable Energy Directive (RED) with clear goals and a roadmap to facilitate its energy transition towards renewable sources. This is done because of both climate concerns as well as reasons related to Ukraine’s foreign policy which led the government to decide that Ukraine should work more on its own energy independence. Currently the percentage of renewable energy sources in Ukraine is among the lowest of the entire Europe and there is only slow development in terms of the growth of the sector, even though there is a lot of available biomass, given the large and flat surface of the country with a well-developed agricultural sector. As in most countries in the world, there is a quite intensive and well-developed debate in Ukraine about the energy sector, energy usage and the necessary transition towards more renewable types of energy. One of the consequences of it is that Ukraine is one of the partner countries in the Paris agreement and committed itself to reducing the amount of greenhouse gas emissions in the future. That means that a transformation towards renewable energy is needed, even though currently in Ukraine only a low percentage of energy is generated by sustainable sources. The general picture is that in Ukraine the development of the renewable energy sector is going not as fast as could have been. In other words, there are several barriers present that hinder the energy transition. One of the issues behind such a barrier may be a limited access to technology, or problems with legislation or other issues which may be unknown so far, but certainly relevant for foreign investors. The Ukrainian government adopted the so-called Renewable Energy Directive (RED), set goals for the energy transition and support the transition itself. In some areas progress was made, for example in the growing number of biomass fired boilers, but still Ukraine remains one of the European countries with the lowest percentage of renewable energy production. Therefore, in order to identify currently existing barriers and help to find possible applications of new technologies in Ukraine, the Dutch Enterprise Agency (Rijksdienst voor Ondernemerschap) commissioned this study. It was done within the framework of the Partners in Business on Bioenergy program. The focus of this study is on analysing the renewable energy sector, with special attention for biomass, in the form of biomass-based heating and biomass for biofuels. Of course, other parts of the renewable energy sector such as solar and wind energy are also taken into consideration. The second part consists of a case study to determine the business case for direct processing of sugar beets with Betaprocess as a possible application of biomass to biofuel production in Ukraine. The third study is aiming at determining the amount of biomass that can safely be taken from the fields, without negatively affecting the fertility of the soil. These sub-studies mentioned in the previous paragraph offer a better understanding of the renewable energy market in general and biomass/biofuel applications in particular. This study sheds light on several important questions that entrepreneurs and/or other foreign investors may have about investing in Ukraine. Even though it is well-known that doing business in Ukraine is challenging, it is also very important to have a clear picture of the opportunities that this country offers, within the limits that nature sets, in order to avoid negative consequences like soil degradation. The objective of this report is to find out about which opportunities and barriers exist in the Ukrainian transition towards renewable energy generation, to calculate the profitability of new biomass-processing technologies as well as finding out limitations of biomass usage.
MULTIFILE
Global awareness on energy consumption and the environmental impacts of fossil fuels boost actions and create more supportive policies towards sustainable energy systems, in the last energy outlook, by the International Energy Agency, it was forecasted totals of 3600 GW from 2016 to 2040 of global deployment of renewables sources (RES), covering 37% of the power generation. While the Natural Gas overtake the coal demand in the energy mix, growing around 50%, manly by more efficiency system and the use of LNG for long-distance gas trades. The energy infrastructure will be more integrated, deploying decentralized and Hybrid Energy Networks (HEN).This transformation on the energy mix leads to new challenges for the energy system, related to the uncertainty and variability of RES, such as: Balancing flexibility, it means having sufficient resources to accommodate when variable production increase and load levels fall (or vice versa). And Efficiency in traditional fired plants, the often turn on and off or modify their output levels to accommodate changes in variable demand, can result in a decrease in efficiency, particularly from thermal stresses on equipment. This paper focus in the possibility to offer balancing resources from the LNG regasification, while ensure an efficient system.In order to asses this issue, using the energy Hub concept a model of a distributed HEN was developed. The HEN consist in a Waste to Energy plant (W2E), a more sustainable case of Combine Heat and Power (CHP) coupled with a LNG cold recovery regasification. To guarantee a most efficiency operation, the HEN was optimized to minimized the Exergy efficiency, additionally, the system is constrained by meeting Supply with variable demand, putting on evidence the sources of balancing flexibility. The case study show, the coupled system increases in overall exergy efficiency from 25% to 35% compared to uncoupled system; it brings additional energy between 1.75 and 3 MW, and it meets variable demand in the most exergy efficient with power from LNG reducing inputs of other energy carriers. All this indicated that LNG cold recovery in regasification coupled other energy systems is as promising tool to support the transition towards sustainable energy systems.
Energy transition is key to achieving a sustainable future. In this transition, an often neglected pillar is raising awareness and educating youth on the benefits, complexities, and urgency of renewable energy supply and energy efficiency. The Master Energy for Society, and particularly the course “Society in Transition”, aims at providing a first overview on the urgency and complexities of the energy transition. However, educating on the energy transition brings challenges: it is a complex topic to understand for students, especially when they have diverse backgrounds. In the last years we have seen a growing interest in the use of gamification approaches in higher institutions. While most practices have been related to digital gaming approaches, there is a new trend: escape rooms. The intended output and proposed innovation is therefore the development and application of an escape room on energy transition to increase knowledge and raise motivation among our students by addressing both hard and soft skills in an innovative and original way. This project is interdisciplinary, multi-disciplinary and transdisciplinary due to the complexity of the topic; it consists of three different stages, including evaluation, and requires the involvement of students and colleagues from the master program. We are confident that this proposed innovation can lead to an improvement, based on relevant literature and previous experiences in other institutions, and has the potential to be successfully implemented in other higher education institutions in The Netherlands.
The denim industry faces many complex sustainability challenges and has been especially criticized for its polluting and hazardous production practices. Reducing resource use of water, chemicals and energy and changing denim production practices calls for collaboration between various stakeholders, including competing denim brands. There is great benefit in combining denim brands’ resources and knowledge so that commonly defined standards and benchmarks are developed and realized on a scale that matters. Collaboration however, and especially between competitors, is highly complex and prone to fail. This project brings leading denim brands together to collectively take initial steps towards improving the ecological sustainability impact of denim production, particularly by establishing measurements, benchmarks and standards for resource use (e.g. chemicals, water, energy) and creating best practices for effective collaboration. The central research question of our project is: How do denim brands effectively collaborate together to create common, industry standards on resource use and benchmarks for improved ecological sustainability in denim production? To answer this question, we will use a mixed-method, action research approach. The project’s research setting is the Amsterdam Metropolitan Area (MRA), which has a strong denim cluster and is home to many international denim brands and start-ups.
Nowadays, there is particular attention towards the additive manufacturing of medical devices and instruments. This is because of the unique capability of 3D printing technologies for designing and fabricating complex products like bone implants that can be highly customized for individual patients. NiTi shape memory alloys have gained significant attention in various medical applications due to their exceptional superelastic and shape memory properties, allowing them to recover their original shape after deformation. The integration of additive manufacturing technology has revolutionized the design possibilities for NiTi alloys, enabling the fabrication of intricately designed medical devices with precise geometries and tailored functionalities. The AM-SMART project is focused on exploring the suitability of NiTi architected structures for bone implants fabricated using laser powder bed fusion (LPBF) technology. This is because of the lower stiffness of NiTi alloys compared to Ti alloys, closely aligning with the stiffness of bone. Additionally, their unique functional performance enables them to dissipate energy and recover the original shape, presenting another advantage that makes them well-suited for bone implants. In this investigation, various NiTi-based architected structures will be developed, featuring diverse cellular designs, and their long-term thermo-mechanical performance will be thoroughly evaluated. The findings of this study underscore the significant potential of these structures for application as bone implants, showcasing their adaptability for use also beyond the medical sector.
