Background: Improving physical activity, especially in combination with optimizing protein intake, after surgery has a potential positive effect on recovery of physical functioning in patients after gastrointestinal and lung cancer surgery. The aim of this randomized controlled trial is to evaluate the efficacy of a blended intervention to improve physical activity and protein intake after hospital discharge on recovery of physical functioning in these patients. Methods: In this multicenter single-blinded randomized controlled trial, 161 adult patients scheduled for elective gastrointestinal or lung cancer surgery will be randomly assigned to the intervention or control group. The purpose of the Optimal Physical Recovery After Hospitalization (OPRAH) intervention is to encourage self-management of patients in their functional recovery, by using a smartphone application and corresponding accelerometer in combination with coaching by a physiotherapist and dietician during three months after hospital discharge. Study outcomes will be measured prior to surgery (baseline) and one, four, eight, and twelve weeks and six months after hospital discharge. The primary outcome is recovery in physical functioning six months after surgery, and the most important secondary outcome is physical activity. Other outcomes include lean body mass, muscle mass, protein intake, symptoms, physical performance, self-reported limitations in activities and participation, self-efficacy, hospital readmissions and adverse events. Discussion: The results of this study will demonstrate whether a blended intervention to support patients increasing their level of physical activity and protein intake after hospital discharge improves recovery in physical functioning in patients after gastrointestinal and lung cancer surgery. Trial registration: The trial has been registered at the International Clinical Trials Registry Platform at 14–10-2021 with registration number NL9793. Trial registration data are presented in Table 1.
Background Insufficient postmatch recovery in elite players may cause an increased risk of injuries, illnesses and non-functional over-reaching.Objective To evaluate postmatch recovery time courses of physical performance and biochemical markers in team ball sport players.Study design Systematic review.Data sources PubMed and Web of Science.Eligibility criteria for selecting studies This systematic review was conducted according to Preferred Reporting Items for Systematic Reviews andMeta-Analyses guidelines. The Critical Review Form for Quantitative Studies was used to evaluate quality. Studies were included if they met the following criteria: (1) Original research evaluated players’ physical recovery postmatch;(2) team/intermittent sports; and (3) at least two postmeasurements were compared with baseline values. Results Twenty-eight studies were eligible. Meanmethodological quality was 11.2±1.11. Most used performance tests and biochemical markers were the countermovement jump test, sprint tests and creatine kinase (CK), cortisol (C) and testosterone (T), respectively.Summary/conclusions The current evidence demonstrates that underlying mechanisms of muscle recovery are still in progress while performance recoveryis already reached. CK recovery time courses are up to ≥72 hours. Soccer and rugby players need more time to recover for sprint performance, CK and C in comparison to other team ball sports. There are more high-quality studies needed regarding recovery in various team sports and recovery strategies on an individual level should be evaluated. Clinical relevance Ongoing insufficient recovery can be prevented by the use of the presented recovery time courses as specific practical recovery guidelines.
LINK
PurposeEarly mobilization of critically ill patients improves functional recovery, but is often hampered by tubes, drains, monitoring devices and muscular weakness. A mobile treadmill with bodyweight support facilitates early mobilization and may shorten recovery time to independent ambulation as compared to usual care physiotherapy alone.Materials and methodsSingle center RCT, comparing daily bodyweight supported treadmill training (BWSTT) with usual care physiotherapy, in patients who had been or were mechanically ventilated (≥48 h) with ≥MRC grade 2 quadriceps muscle strength. BWSTT consisted of daily treadmill training in addition to usual care physiotherapy (PT). Primary outcome was time to independent ambulation measured in days, using the Functional Ambulation Categories (FAC-score: 3). Secondary outcomes included hospital length of stay and serious adverse events.ResultsThe median (IQR) time to independent ambulation was 6 (3 to 9) days in the BWSTT group (n = 19) compared to 11 (7 to 23) days in the usual care group (n = 21, p = 0.063). Hospital length of stay was significantly different in favour of the BWSTT group (p = 0.037). No serious adverse events occurred.InterpretationBWSTT seems a promising intervention to enhance recovery of ambulation and shorten hospital length of stay of ICU patients, justifying a sufficiently powered multicenter RCT.Trial registration number: Dutch Trial Register ID: NTR6943.
Currently, many novel innovative materials and manufacturing methods are developed in order to help businesses for improving their performance, developing new products, and also implement more sustainability into their current processes. For this purpose, additive manufacturing (AM) technology has been very successful in the fabrication of complex shape products, that cannot be manufactured by conventional approaches, and also using novel high-performance materials with more sustainable aspects. The application of bioplastics and biopolymers is growing fast in the 3D printing industry. Since they are good alternatives to petrochemical products that have negative impacts on environments, therefore, many research studies have been exploring and developing new biopolymers and 3D printing techniques for the fabrication of fully biobased products. In particular, 3D printing of smart biopolymers has attracted much attention due to the specific functionalities of the fabricated products. They have a unique ability to recover their original shape from a significant plastic deformation when a particular stimulus, like temperature, is applied. Therefore, the application of smart biopolymers in the 3D printing process gives an additional dimension (time) to this technology, called four-dimensional (4D) printing, and it highlights the promise for further development of 4D printing in the design and fabrication of smart structures and products. This performance in combination with specific complex designs, such as sandwich structures, allows the production of for example impact-resistant, stress-absorber panels, lightweight products for sporting goods, automotive, or many other applications. In this study, an experimental approach will be applied to fabricate a suitable biopolymer with a shape memory behavior and also investigate the impact of design and operational parameters on the functionality of 4D printed sandwich structures, especially, stress absorption rate and shape recovery behavior.
Mattresses for the healthcare sector are designed for robust use with a core foam layer and a polyurethane-coated polyester textile cover. Nurses and surgeons indicate that these mattresses are highly uncomfortable to patients because of poor microclimatic management (air, moisture, temperature, friction, pressure regulation, etc) across the mattress, which can cause pressure ulcers (in less than a day). The problem is severe (e.g., extra recovery time, medication, increased risk, and costs) for patients with wounds, infection, pressure-sensitive decubitus. There are around 180,000 waterproof mattresses in the healthcare sector in the Netherlands, of which yearly 40,000 mattresses are discarded. Owing to the rapidly aging population it is expected to increase the demand for these functional mattresses from 180,000 to 400,000 in the next 10 years in the healthcare sector. To achieve a circular economy, Dutch Government aims for a 50% reduction in the use of primary raw materials by 2030. As of January 1, 2022, mattress manufacturers and importers are obliged to pay a waste management contribution. Within the scope of this project, we will design, develop, and test a circular & functional mattress for the healthcare (cure & care) sector. The team of experts from knowledge institutes, SMEs, hospital(s), branch-organization joins hands to design and develop a functional (microclimate management, including ease of use for nurses and patients) mattress that deals with uncomfortable sleeping and addresses the issue of pressure ulcers thereby overall accelerating the healing process. Such development addresses the core issue of circularity. The systematic research with proper demand articulation leads to V-shape verification and validation research methodology. With design focus and applied R&D at TRL-level (4-6) is expected to deliver the validated prototype(s) offering SMEs an opportunity to innovate and expand their market. The knowledge will be used for dissemination and education at Saxion.
Nowadays, there is particular attention towards the recycling of waste materials which is a critical issue for environmental protection and waste management. Polymer materials have numerous applications in daily life products. As a result, plastic pollution has become one of the biggest threats to nature, therefore recycling or replacing them with bio-based materials can significantly help the ecosystems. So far, many studies have investigated the possibility of reusing plastic waste, as a second life, to obtain consumable products. The 3D printing market is one of the great sectors that can utilize a wide range of thermoplastic polymers. This technology provides a unique capability to produce complex shape structures and products that cannot be produced by other manufacturing processes. In particular, Fused Filament Fabrication (FFF) is a common printing technology that consumes thermoplastic filaments including recycled materials. This printing technique has been also very successful in using novel high-performance materials with sustainable aspects. The reSHAPE project aims to develop novel smart filaments, with shape memory properties, from recycled materials. The filaments can be applied for the design and fabrication of smart products with dynamic behavior. In particular, the fabricated parts can shift from a plastic-deformed shape into a recovered original shape when being triggered by an external stimulus, like temperature. For that, we will specifically apply recycled polylactic acid (PLA) and thermoplastic polyurethane (TPU) as the main materials in this study. Because they both have proper shape memory properties and also TPU can potentially enhance the material flexibility which is required in the design and fabrication of functional components. As a result, this study will obtain a proper combination of these materials with good printability and functionality that can be used for a wide range of products from the aerospace and automotive sectors to soft robotics and medical devices.
