The Power to Flex project aims to promote the development of storage possibilities from sustainable energy sources. Hydrogen is opted to be a feasible energy carrier, which can also be stored for prolonged times without further losses and can be transformed into electricity and heat when needed. Producing hydrogen from electrolysis processes has a low CO2 footprint, however the efficiency at both the system, stack and cell level still increases due to further research and development.Electrolysis is conventionally performed with direct current, of which the energy is usually supplied from the grid. Rectifiers are necessary to provide the energy source for electrolysis, which unfortunately waste some of the efficiency, albeit becoming more efficient. Although it is known that distortions, harmonics and ripple, in the current supply can cause decreased performance of the electrolysis, a fundamental understanding is often not provided in published research. Controlled modulation of the electrolysis process can however form a possibility to enhance the performance of electrolysis
In Europe, green hydrogen and biogas/green gas are considered important renewable energy carriers, besides renewable electricity and heat. Still, incentives proceed slowly, and the feasibility of local green gas is questioned. A supply chain of decentralised green hydrogen production from locally generated electricity (PV or wind) and decentralised green gas production from locally collected biomass and biological power-to-methane technology was analysed and compared to a green hydrogen scenario. We developed a novel method for assessing local options. Meeting the heating demand of households was constrained by the current EU law (RED II) to reduce greenhouse gas (GHG) emissions by 80% relative to fossil (natural) gas. Levelised cost of energy (LCOE) analyses at 80% GHG emission savings indicate that locally produced green gas (LCOE = 24.0 €ct kWh−1) is more attractive for individual citizens than locally produced green hydrogen (LCOE = 43.5 €ct kWh−1). In case higher GHG emission savings are desired, both LCOEs go up. Data indicate an apparent mismatch between heat demand in winter and PV electricity generation in summer. Besides, at the current state of technology, local onshore wind turbines have less GHG emissions than PV panels. Wind turbines may therefore have advantages over PV fields despite the various concerns in society. Our study confirms that biomass availability in a dedicated region is a challenge.
In Gelderland at industriepark Kleefsewaard, a prominent knowledge hub for hydrogen technology has been developed, featuring key industry players and research groups contributing to innovative and cost-effective hydrogen technologies. However, the region faces a challenge in the lack of available test equipment for hydrogen innovations. In Anion Exchange Membrane (AEM) technology, a route to follow is to create hydrogen more efficiently with stacks that can operate under high pressure (50 bar – 200 bar). This results in compact hydrogen storage. Research must be done to understand crossover effects which become more apparent at these high pressure conditions. The overall goal is to design a Balanced of Plant (BOP) system, incorporating Process Flow Diagram (PFD) and Piping & Instrumentation Diagram (P&ID) elements, alongside hydrogen purification systems and gas-liquid separators, for a test setup operating AEM stacks at 200 bar. De Nooij Stainless contributes by designing and fabricating a gas liquid separator, addressing challenges such as compatibility, elevated temperatures, and hydrogen safety. ON2Quest collaborates in supporting the design of a hydrogen purification system and the Balance of Plant (BoP), ensuring flexibility for testing future stacks and hydrogen purification components. HyET E-Trol specializes in high pressure (up to 200 bar) AEM electrolyser stacks and is responsible for providing problem statements and engineering challenges related to the (Balanced of Plant) BoP of AEM systems, and contributes in solving them. Subsequent projects will feature test sequences centered on other stacks, allowing for testing stacks from other companies. The resulting framework will provide a foundation for ongoing advancements, with contributions from each partner playing a crucial role in achieving the project's goals.
The program is structured in five tasks, of which three are technical by nature and two are on integration and enabling aspects. The technical tasks are infrastructure, offshore and large-scale storage of hydrogen. The enabling task is safety, standardization and regulation, which is a key boundary condition for the successful development of a hydrogen infrastructure. As overarching task the aspect of upscaling and system integration is analysed. Both the enabling and overarching tasks are strongly linked to the technical tasks and require active interaction between those tasks to be successful. Our consortium enables productive interactions by facilitating knowledge sharing, joint research projects, technology transfer, policy advocacy, public engagement, and standardization efforts. These interactions not only enhance the research and development outcomes within the consortium but also contribute to the broader societal and economic benefits of a hydrogen-based energy transition.
Carbon dioxide (CO2) is the final waste product for all carbon-containing products. Its reuse will partly mitigate climate change and, in addition, provide a valuable feedstock for fuels and chemicals. Zuyd University of Applied Sciences (ZUYD), Innosyn B.V., and Chemtrix B.V. will develop a flow reactor for photochemical reactions with gases conducted at high pressure. This reactor is the necessary first development towards artificial photosynthesis: the connection of hydrogen (H2) to the ultimate waste product CO2 to store energy in a chemical bond, in order to produce so-called solar fuels and C1-chemicals/products. With an increasing amount of renewables in the energy system, energy storage becomes increasingly important to continuously match supply and demand. In a cooperation between three ZUYD research groups with Chemtrix B.V. and Innosyn B.V., multiple cost-efficient reactor designs for this flow reactor will be analyzed and two designs will be selected to be implemented by small extensions of existing equipment. Simultaneously, two appropriate test re-actions involving a gas (E-Z isomerization followed by hydrogenation) and with a CO2 analogue (a hydrogenation of a carboxylic acid) will be developed to be conducted in the reactor when the con-struction has been finished. We aim to disseminate the new capabilities developed in this KIEM proposal by the project partners with respect to the new reactors to several selected stakeholders. Furthermore, to expand the project several options (SIA-RAAK and H2020 grants) will be explored.
