In het project Koppelkansen hebben inwoners van Appingedam, Kantens,Stitswerd en Loppersum meegedacht over hoe de versterkingsoperatiekan worden benut voor de verduurzaming van de huizen. Het projectwerd geleid door twee onderzoekers van het Kenniscentrum Noorder-Ruimte (Hanzehogeschool Groningen), in samenwerking met drie lokaleenergiecoöperaties: LOPEC uit Loppersum, Eendracht uit Appingedam enE.I.K. uit Kantens. Dit boekje biedt inspiratie en praktische tips voor bewoners om zelf verder aan de slag te gaan met de verduurzaming van hun woningen.
DOCUMENT
The seismic assessment of unreinforced masonry (URM) buildings with cavity walls is of high relevance in regions such as in Central and Northern Europe, Australia, New Zealand and China because of the characteristics of the masonry building stock. A cavity wall consists of two separate parallel walls usually connected by metal ties. Cavity walls are particularly vulnerable to earthquakes, as the out-of-plane capacity of each individual leaf is significantly smaller than the one of an equivalent solid wall. This paper presents the results of an experimental campaign conducted by the authors on metal wall tie connections and proposes a mechanical model to predict the cyclic behaviour of these connections. The model has been calibrated by us- ing the experimental results in terms of observed failure modes and force-displacement responses. Results are also presented in statistical format.
DOCUMENT
Out-of-plane (OOP) wall collapse is one of the most common failure mechanismsin unreinforced masonry (URM) structures. Insufficient connections at wall-to-wall, wall-to-floor or wall-to-roof levels are one of the main reasons for OOP failures. The seismic assessment of URM buildings with insufficient connections became of high relevance. In particular, cavity walls are widely used in many regions, such as Central and Northern Europe, Australia, New Zealand, China, and Groningen in the Netherlands. Defining thus the behaviour of such connections is of prime importance to understand the overall response of URM buildings.This paper is about an experimental campaign conducted at the BuildinG laboratory of Hanze University of Applied Sciences on timber joist-masonry connections, reproducing cavity walls with timber joists in as-built condition. A total of six URM tests were performed, with varying configurations as: two different tie distributions, two precompression levels and two different as-built connections. The tests aim at providing a complete characterization of the behaviour of the timber-joist cavity-wall connections under axial cyclic loading with special attention on the developed failure mechanism and the definition of force-displacement curves for each group of tests performed. The experimental results show that cohesion and friction between joist and masonry are important parameters in terms of the governing failure mechanism, whether it is a joist-sliding or rocking failure.
DOCUMENT
