We report on a first field test in which miniaturized sensor motes were used to explore and inspect an operational pipeline by performing in situ measurements. The spherical sensor motes with a diameter of 39 mm were equipped with an inertial measurement unit (IMU) measuring 3-D acceleration, rotation, and magnetic field, as well as an ultrasound emitter. The motes were injected into the pipeline and traversed a 260-m section of it with the flow of water. After the extraction of the motes from the pipeline, the recorded IMU data were read out for the off-line analysis. Unlike dead-reckoning techniques, we analyze the IMU data to reveal structural information about the pipeline and locate pipe components, such as hydrants and junctions. The recorded data show different and distinct patterns that are a result of the fluid dynamics and the interaction with the pipeline. Using the magnetic data, pipe sections made from different materials and pipe components are identified and localized. A preliminary analysis on the motes' interaction with the pipeline shows differences in pipe wall roughness and locates structural anomalies. The results of this field test show that sensor motes can be used as a versatile and cost-effective tool for exploration and inspection of a wide variety of pipelines.
DOCUMENT
The main goal of this study is to identify knowledge gaps and uncertainties in Quantitative Risk Assessments (QRA) for CO2 pipelines and to assess to what extent those gaps and uncertainties affect the final outcome of the QRA. The impact of methodological choices and uncertain values for input parameters on the results of QRA’s have been assessed through an extensive literature review and by using commercially available release, dispersion and effect models. It is made apparent that over the full life cycle of a QRA knowledge gaps and uncertainties are present that may have large scale impact on the accuracy of assessing risks of CO2 pipelines. These encompass the invalidated release and dispersion models, the currently used failure rates, choosing the type of release to be modeled and the dose-effect relationships assumed. Also recommendations are presented for the improvement of QRA’s for CO2 pipelines.
MULTIFILE
Hydrogen (H2) is a key element in the Dutch energy transition, considered a sources of flexibility to balance the variable renewable energy sources, facilitating its integration into the energy system. But also as an energy carrier. Both the gas and electricity transmission operators (TSO) have the vision to interconnect their networks with H2, by distributing the green H2 produced with offshore electrolysers into high pressure gas pipelines to relive the overload electric network. The planned compressed H2 pipelines cross the north of North-Holland region, offering a backbone for a H2 economy. Furthermore, at regional level there are already a big number of privet-public H2 developments, among them the DuWaAl, which is a H2 production-demand chain, consists of 1) An H2 mill, 2) 5 filling stations in the region and 3) a large fleet of trucks and other users. Because of these developments, the North-Holland region needs a better insight into the position that H2 could fulfil in the local energy system to contribute to the energy transition. The aim of this research is to analyse these H2 economy, from the emergent to settled, by identifying early and potential producer- consumer, considering the future infrastructure requirements, and exploring economy-environmental impacts of different supply paths
DOCUMENT
A model to describe biogas transport costs in a regional grid is presented. In the model biogas is collected to a central location by transport through dedicated pipelines. Costs have been calculated for two different lay-outs of the grid i.e. star and fishbone lay-out. The costs depend on the covered area and the size of the digesters. Model results show that in a star layout transport costs for small scale digesters are much higher than costs for large scale digesters and costs in a fishbone lay-out are lower than costs in a star lay-out.
DOCUMENT
Biogas is produced from biomass by means of digestion. Treated to so-called ‘green gas’, it can replace natural gas. Alternatively, biogas can be used to produce electrical power and heat in a combined heat power (CHP) installation. In 2014 global biogas production was only 1% of natural gas production. In the future, biogas is expected to play a role in specific applications, e.g. to provide flexibility in electricity supply
LINK
Collaboratively editing game worlds and the underlying asset version management techniques present us with many challenges when using a traditional Version Control System (VCS). This paper suggests a new method that will aid in the tracking, branching, and selection of asset versions within a game development pipeline. A prototype has been developed which demonstrated im-provements in both productivity and usability providing greater visibility of incremental asset changes and alterations to their relationships which equated to approximately a 30% better user experience when compared to an existing industry VCS.
DOCUMENT
One of the goals for the JPI Water funded project INovations for eXtreme Climatic Events (INXCES) is to provide risk assessment tools for urban hydro-climatic events. Combining disciplines increases the capacity to manage and improve the mitigation of the infrastructure for stormwater in urban areas. INXCES is an European collaboration among the cites Bergen, NO, Groningen, NL, Bucharest, RO, and Luleå, SE.In urban areas infrastructure, such as sewage and drainage systems, is installed in the subsurface to cope with surface water and stormwater runoff. However, the natural patterns are preferred hence human effort. A flood model using Digital Elevation Model (DEM) show the flow patterns of stormwater and areas exposed to flooding. Combining mapping of natural flow paths and floodmodelling, areas prone to flooding is accentuated. The subsurface infrastructure in these prone areas are exposed to larger quantities of water during heavy rainfall events, which is becoming more frequent due to climate change. Results from this interdisciplinary study, will give the water and wastewater authority a risk assessment to pinpoint areas where water infrastructure is more exposedto failure, clogging and damages. Furthermore, we argue that areas that are prone to repeated flooding are more exposed for subsidence in the ground. Larger movement in the ground will cause damage to the infrastructure, such ascracking of pipelines and damage to buildings, roads etc. By combining results mentioned above with subsidence data (InSAR date collected from Satellites), a risk assessment map can show areas to prioritize. Subsurface measures such as SUDS (Sustainable Urban Drainage Systems) can be a resilient solution to a recurrent problem in an urban area, as a remediation to flooding (and drought)and as stabilisation of ground conditions.
DOCUMENT
DOCUMENT
The European Commission has selected the Northern Netherlands to become the leading European hydrogen region and supports establishment of a complete local (green) hydrogen ecosystem covering production, storage, distribution, refueling and final use of hydrogen (Cordis, H2Valley, 2019). In line with the European recognition, the Dutch government has set the goal to establish a hydrogen ecosystem by 2025 that would further expand to Western Europe by 2030. Yet before the European Union nominated the Northern Netherlands as European Hydrogen Valley, the key stakeholders in the Northern Netherlands – industry, SMEs, knowledge institutions and government – committed to the long-term cooperation in development of the green hydrogen market. Subsequently, the three regional governments of the Northern Netherlands, - Groningen, Friesland and Drenthe, - prepared the common Hydrogen Investment Agenda (2019), which was further elaborated in the common Hydrogen Investment Plan (2020). The latter includes investments amounting to over 9 billion euro, which is believed will secure some 66.000 existing jobs and help create between 25 thousands (in 2030) and 41 thousands (in 2050) new jobs.However, implementation of these ambitious plans to establish a hydrogen ecosystem of this scale will require not only investments into development of a new infrastructure or technological adaptation of present energy systems, e.g., pipelines, but also facilitation of economic transformation and securing the social support and acceptance. What are the prospects for the social support for the developing European Hydrogen Valley in the Northern Netherlands and its acceptance by inhabitants? The paper discusses the social support and acceptance aspects for a hydrogen ecosystem in the context of regional experiences of energy transition, including the concerns of energy justice, safety, and public trust that were raised in the recent past.
LINK
The past two years I have conducted an extensive literature and tool review to answer the question: “What should software engineers learn about building production-ready machine learning systems?”. During my research I noted that because the discipline of building production-ready machine learning systems is so new, it is not so easy to get the terminology straight. People write about it from different perspectives and backgrounds and have not yet found each other to join forces. At the same time the field is moving fast and far from mature. My focus on material that is ready to be used with our bachelor level students (applied software engineers, profession-oriented education), helped me to consolidate everything I have found into a body of knowledge for building production-ready machine learning (ML) systems. In this post I will first define the discipline and introduce the terminology for AI engineering and MLOps.
LINK
