This report presents research on success factors of learning communities with a case study of the Innovation Lab Hanze International Business Office (further – Innovation Lab HIBO) at Hanze University of Applied Sciences Groningen, the Netherlands. The research project is a part of the broader research programme on innovation of education and the success factors of learning communities carried on by a number of researchers at Hanze University of Applied Sciences Groningen (further – Hanze University AS).In answering the main research question on success factors of learning communities and, specifically, the Innovation Lab HIBO, two sub-questions were formulated: the first deals with school level expectations about the Innovation Lab HIBO, whereas the second explores what are the institutional expectations and guidelines regarding living labs at Hanze University AS. The research focus is on formalised expectations about the goals and outcomes of living labs, as attaining the established goals and outcomes would testimony a successful activity of a living lab. The factors that facilitate or determine whether the goalsand outcomes of living labs are achieved are therefore the success factors.The analysis of both school level expectations about the Innovation Lab HIBO and the institutional expectations and guidelines regarding living labs reveals a number of success factors, conditions, and preconditions. As these do not coincide, it is argued that finding the right balance between local, school level, expectations and the institutional goals is crucial for the successful performance of living labs. Another important factor for successful performance of the living lab and, specifically the Innovation Lab HIBO, is development of a learning community. This process would require strengthening of an open organisationalculture and facilitation of exchange of ideas and learning process.The research project was carried on in the period from February 1, 2020, till August 30, 2020. From September 2020 the follow up research is planned into operationalization of success factors, definition of performance criteria, performance evaluation, development of suggestions for improvement of performance, and development of a blueprint for the establishment of innovation labs.
In this paper, the success of students during their first year at the Amsterdam University of Applied Sciences at the faculty of Communication and Creative Business (formerly called Media, Information and Communication) will be compared prior to Covid-19 and during Covid-19 in the first year. With the purpose to determine the influence of the transition from offline to online education on student success. Student success is defined in two ways. First by the general average grade point (GPA) of all the exams in this first year, which in the Netherlands is the preliminary examination (propedeuse diploma issued after the first year of studies in the Netherlands). Second, the time it takes to pass all first-year exams and earn the propedeuse (diploma of the preliminary examination). Furthermore, the mandatory student choice test (SCT), taken prior to the entrance of the University, is compared with the success of the students and examined on its predictive value. This will ultimately provide insight in the implications of a year of emergency remote teaching and enhance the knowledge about influences of online education upon student success in higher education.
For delayed and long-term students, the education process is often a lonely journey. The main conclusion of this research is that learning should not be an individual process of the student connected to one lecturer, but rather a community where learning is a collective journey. The social interaction between lecturers, groups of delayed students and other actors is an important engine for arriving at the new knowledge, insights and expertise that are important to reach their final level. This calls for the design of social structures and the collaboration mechanism that enable the bonding of all members in the community. By making use of this added value, new opportunities for the individual are created that can lead to study success. Another important conclusion is that in the design and development of learning communities, sufficient attention must be paid to cultural characteristics. Students who delay are faced with a loss of self-efficacy and feelings of shame and guilt. A learning community for delayed students requires a culture in which students can turn this experience into an experience of self-confidence, hope and optimism. This requires that the education system pays attention to language use, symbols and rituals to realise this turn. The model ‘Building blocks of a learning environment for long-term students’ contains elements that contribute to the study success of delayed and long-term students. It is the challenge for every education programme to use it in an appropriate way within its own educational context. Each department will have to explore for themselves how these elements can be translated into the actions, language, symbols and rituals that are suitable for their own target group.
Digital transformation has been recognized for its potential to contribute to sustainability goals. It requires companies to develop their Data Analytic Capability (DAC), defined as their ability to collect, manage and analyze data effectively. Despite the governmental efforts to promote digitalization, there seems to be a knowledge gap on how to proceed, with 37% of Dutch SMEs reporting a lack of knowledge, and 33% reporting a lack of support in developing DAC. Participants in the interviews that we organized preparing this proposal indicated a need for guidance on how to develop DAC within their organization given their unique context (e.g. age and experience of the workforce, presence of legacy systems, high daily workload, lack of knowledge of digitalization). While a lot of attention has been given to the technological aspects of DAC, the people, process, and organizational culture aspects are as important, requiring a comprehensive approach and thus a bundling of knowledge from different expertise. Therefore, the objective of this KIEM proposal is to identify organizational enablers and inhibitors of DAC through a series of interviews and case studies, and use these to formulate a preliminary roadmap to DAC. From a structure perspective, the objective of the KIEM proposal will be to explore and solidify the partnership between Breda University of Applied Sciences (BUas), Avans University of Applied Sciences (Avans), Logistics Community Brabant (LCB), van Berkel Logistics BV, Smink Group BV, and iValueImprovement BV. This partnership will be used to develop the preliminary roadmap and pre-test it using action methodology. The action research protocol and preliminary roadmap thereby developed in this KIEM project will form the basis for a subsequent RAAK proposal.
Currently, many novel innovative materials and manufacturing methods are developed in order to help businesses for improving their performance, developing new products, and also implement more sustainability into their current processes. For this purpose, additive manufacturing (AM) technology has been very successful in the fabrication of complex shape products, that cannot be manufactured by conventional approaches, and also using novel high-performance materials with more sustainable aspects. The application of bioplastics and biopolymers is growing fast in the 3D printing industry. Since they are good alternatives to petrochemical products that have negative impacts on environments, therefore, many research studies have been exploring and developing new biopolymers and 3D printing techniques for the fabrication of fully biobased products. In particular, 3D printing of smart biopolymers has attracted much attention due to the specific functionalities of the fabricated products. They have a unique ability to recover their original shape from a significant plastic deformation when a particular stimulus, like temperature, is applied. Therefore, the application of smart biopolymers in the 3D printing process gives an additional dimension (time) to this technology, called four-dimensional (4D) printing, and it highlights the promise for further development of 4D printing in the design and fabrication of smart structures and products. This performance in combination with specific complex designs, such as sandwich structures, allows the production of for example impact-resistant, stress-absorber panels, lightweight products for sporting goods, automotive, or many other applications. In this study, an experimental approach will be applied to fabricate a suitable biopolymer with a shape memory behavior and also investigate the impact of design and operational parameters on the functionality of 4D printed sandwich structures, especially, stress absorption rate and shape recovery behavior.
Alcohol use disorder (AUD) is a pattern of alcohol use that involves having trouble controlling drinking behaviour, even when it causes health issues (addiction) or problems functioning in daily (social and professional) life. Moreover, festivals are a common place where large crowds of festival-goers experience challenges refusing or controlling alcohol and substance use. Studies have shown that interventions at festivals are still very problematic. ARise is the first project that wants to help prevent AUD at festivals using Augmented Reality (AR) as a tool to help people, particular festival visitors, to say no to alcohol (and other substances). ARise is based on the on the first Augmented Reality Exposure Therapy (ARET) in the world that we developed for clinical treatment of AUD. It is an AR smartphone driven application in which (potential) visitors are confronted with virtual humans that will try to seduce the user to accept an alcoholic beverage. These virtual humans are projected in the real physical context (of a festival), using innovative AR glasses. Using intuitive phone, voice and gesture interactions, it allows users to personalize the safe experience by choosing different drinks and virtual humans with different looks and levels of realism. ARET has been successfully developed and tested on (former) AUD patients within a clinical setting. Research with patients and healthcare specialists revealed the wish to further develop ARET as a prevention tool to reach people before being diagnosed with AUD and to extend the application for other substances (smoking and pills). In this project, festival visitors will experience ARise and provide feedback on the following topics: (a) experience, (b) awareness and confidence to refuse alcohol drinks, (c) intention to use ARise, (d) usability & efficiency (the level of realism needed), and (e) ideas on how to extend ARise with new substances.
