To understand how transition across different thermal zones in a building impacts the thermal perception of occupants, the current work examines occupant feedback in two work environments — nursing staff in hospital wards and the workers in an office. Both studies used a mix of subjective surveys and objective measurements. A total of 96 responses were collected from the hospital wards while 142 were collected from the office. The thermal environment in the hospital wards was perceived as slightly warm on the ASHRAE thermal sensation scale (mean TSV = 1.2), while the office workers rated their environment on the cool side (mean TSV = 0.15). The results also show that when the transitions were across temperature differences within 2 °C, the thermal perception was not impacted by the magnitude of the temperature difference — as reflected in occupant thermal sensation and thermal comfort/thermal acceptability vote. This would imply that the effect of temperature steps on thermal perception, if any, within these boundaries, was extremely short lived. These findings go towards establishing the feasibility of heterogeneous indoor thermal environments and thermal zoning of workspaces for human comfort.
Thermal comfort in operating theatres is a less addressed research component of the in-door environment in operating theatres. The air quality naturally gets most attention when considering the risk of surgical site infections. However, the importance of thermal comfort must not be underestimated. In this research, the current thermal comfort situation of staff members is investigated. Results show that the thermal comfort for the members of a surgical team is perceived as not optimal. Application of the PMV and DR models needs further attention when applied for operating theatres. For the investigated ventilation systems, the differences in thermal comfort outcomes are small.
As people age, physiological changes affect their thermal perception, sensitivity and regulation. The ability to respond effectively to temperature fluctuations is compromised with physiological ageing, upsetting the homeostatic balance of health in some. As a result, older people can become vulnerable at extremes of thermal conditions in their environment. With population ageing worldwide, it is an imperative that there is a better understanding of older people’s thermal needs and preferences so that their comfort and wellbeing in their living environment can be optimised and healthy ageing achieved. However, the complex changes affecting the physiological layers of the individual during the ageing process, although largely inevitable, cannot be considered linear. They can happen in different stages, speeds and intensities throughout the ageing process, resulting in an older population with a great level of heterogeneity and risk. Therefore, predicting older people’s thermal requirements in an accurate way requires an in-depth investigation of their individual intrinsic differences. This paper discusses an exploratory study that collected data from 71 participants, aged 65 or above, from 57 households in South Australia, over a period of 9 months in 2019. The paper includes a preliminary evaluation of the effects of individual intrinsic characteristics such as sex, body composition, frailty and other factors, on thermal comfort. It is expected that understanding older people’s thermal comfort from the lens of these diversity-causing parameters could lead to the development of individualised thermal comfort models that fully capture the heterogeneity observed and respond directly to older people’s needs in an effective way. (article starts at page 13)
MULTIFILE
Eggshell particles as bio-ceramic in sustainable bioplastic engineering – ESP-BIOPACK Plastics make our lives easier in many ways. However, if they are not properly disposed of, they end up in the environment. Recently, biodegradable biopolymers, such as polylactic acid (PLA) and polyhydroxy alkanoates (PHAs), have moved towards alternatives for applications such as sustainable packaging. The major limitations of these biopolymers are the high cost, which is due to the high cost of the starting materials and the small volumes, and the poor thermal and mechanical properties such as limited processability and low impact resistance. Attempts to modify PHAs have been researched in many ways, such as blending various biodegradable polymers or mixing inorganic mineral fillers. Eggshell (10 million tons per year by 2030) is a natural bio-ceramic mineral with a unique chemical composition of calcium carbonate (>95% calcite). So far it has been regarded as a zero-value waste product, but it could be a great opportunity as raw material to reduce the cost of biopolymers and to improve properties, including the decomposition process at the end-of-life. In this project, we aim to develop eggshell particles that serve as bio-fillers in biopolymers to lower the cost of the product, to improve mechanical properties and to facilitate the validation of end-of-life routes, therefore, economically enhance the wide applications of such. The developed bioplastic packaging materials will be applied in SME partner EGGXPERT’s cosmetics line but also in other packaging applications, such as e.g. biodegradable coffee capsules. To be able to realize the proposed idea, the partnership between Chemelot Innovation and Learning Labs (CHILL), EGGXPERT B.V. and the Research Centre Material Sciences of Zuyd University of Applied Sciences is needed to research the physical, mechanical and end-of-life influences of eggshell particles (ESP) in biopolymers such as PLA and PHA and optimize their performance.
Brandweermensen lopen het meeste gevaar als ze onder tijdsdruk een gebouw moeten verkennen, of een brand moeten blussen terwijl de situatie nog niet goed kan worden overzien. Omvallende muren, instortende plafonds of gewoon gestruikeld over door de rook onzichtbare brokstukken leiden tot vermijdbare letsels of zelfs slachtoffers. Met name de inzet bij branden in stedelijke parkeergarages onder woontorens vormen een enorm risico. Het inzetten van onbemande, op afstand bestuurbare voertuigen voor verkenning en bluswerk is een oplossing die binnen de brandweer breed wordt gedragen. De brandweer moet deze innovatieve technologie echter zien te omarmen. Zij werken nu vanuit hun intuïtie en weten direct hoe te acteren op basis van wat zij waarnemen. Praktijkgericht onderzoek heeft echter uitgewezen dat scepsis over de inzet van blusplatforms bij incidenten plaats heeft gemaakt voor zeker vertrouwen. Een blusplatform, voorzien van juiste sensoren kan de Officier van Dienst (OVD) ondersteunen bij het nemen van een beslissing om al dan niet tot een ‘aanval’ over te gaan. Praktijktesten hebben echter laten zien dat de huidige blusplatforms nog niet optimaal functioneren om als volwaardig ‘teamlid’ te kunnen worden ingezet. Dit heeft enerzijds met technologische ontwikkelingen (sensoren en communicatieverbindingen) te maken, maar anderzijds moet de informatievoorziening (human-machine interfacing) naar de brandweer beter worden afgestemd. In dit project gaan Saxion, het instituut fysieke veiligheid, de universiteit Twente, het bedrijfsleven en vijf veiligheidsregio’s onderzoeken hoe en wanneer innovatieve blusplatforms op een intuïtieve manier kunnen worden ingezet door training én (kleine) productaanpassing zodat deze een volwaardig onderdeel kunnen zijn van het brandweerkorps. Een blusplatform kan letselschade en slachtoffers voorkomen, mits goed ingezet en vertrouwd door de mensen die daarvan afhankelijk zijn. Het vak van brandweer, als beroeps of vrijwilliger, is een van de gevaarlijkste die er is. Laten we er samen voor zorgen dat het iets veiliger kan worden.
Sustainable energy production relies on smart design of functional nanomaterials with controllable sizes and structures. Core-shell nanoparticles are highly functional materials with properties arising from the core or shell materials or a combination of both. Changing the electronic properties of the shell by tailored design or induced by the underlying core lead to enhanced catalytic performances, especially in electrocatalysis. Tailoring the structure and functions of core and shell materials simultaneously often involves complex chemical methods. In this KIEM GoChem project, University of Amsterdam will work together with VSParticle, Spark904 and Inholland University of Applied Sciences to develop a novel and environmentally friendly method for the gas-phase synthesis of core-shell nanoparticles. A physical process will be used to control the growth and the mean size of the core whilst the structure and thickness of the shell will be tuned via selective adsorption and thermal processes. Core-shell nanoparticles produced by the proposed method can be directly incorporated into the next process step, e.g. at electrode surface or in (conductive) composites.
