Objective: We aimed to identify published classification systems with a targeted treatment approach (treatment-based classification systems (TBCSs)) for patients with non-specific neck pain, and assess their quality and effectiveness. Design: Systematic review. Data sources: MEDLINE, CINAHL, EMBASE, PEDro and the grey literature were systematically searched from inception to December 2019. Study appraisal and synthesis: The main selection criterium was a TBCS for patients with non-specific neck pain with physiotherapeutic interventions. For data extraction of descriptive data and quality assessment we used the framework developed by Buchbinder et al. We considered as score of ≤3 as low quality, a score between 3 and 5 as moderate quality and a score ≥5 as good quality. To assess the risk of bias of studies concerning the effectiveness of TBCSs (only randomized clinical trials (RCTs) were included) we used the PEDro scale. We considered a score of ≥ six points on this scale as low risk of bias. Results: Out of 7664 initial references we included 13 studies. The overall quality of the TBCSs ranged from low to moderate. We found two RCTs, both with low risk of bias, evaluating the effectiveness of two TBCSs compared to alternative treatments. The results showed that both TBCSs were not superior to alternative treatments. Conclusion: Existing TBCSs are, at best, of moderate quality. In addition, TBCSs were not shown to be more effective than alternatives. Therefore using these TBCSs in daily practice is not recommended.
LINK
From the article: Manufacturing technology can improve the turnover of a company if it enables fast market introduction for volume production. Reconfigurable equipment is developed to meet the growing demand for more agile production. Modular reconfiguration, defined as changing the structure of the machine, enables larger variation of products on a single manufacturing system; these solutions are called Reconfigurable Manufacturing Systems (RMS). The quality of RMS, and the required resources to bring it to reliable production, is largely determined by a swift execution of the reconfiguration process. This paper proposes a method to compare alternatives for the ways to implement reconfiguration. Three classes of reconfiguration are defined to distinguish the impact of the proposed alternatives. The procedure uses a recently introduced index method for development of RMS process modules. This index method is based on the Axiomatic Design theory. Weighing factors are used to calculate the resources and lead time needed to implement the reconfiguration process. Application of the method leads to quick comparison of alternatives in the early stage of development. Successful execution of the method was demonstrated for the manufacturing process of a 3D measuring probe.
MULTIFILE
This paper proposes an amendment of the classification of safety events based on their controllability and contemplates the potential of an event to escalate into higher severity classes. It considers (1) whether the end-user had the opportunity to intervene into the course of an event, (2) the level of end-user familiarity with the situation, and (3) the positive or negative effects of end-user intervention against expected outcomes. To examine its potential, we applied the refined classification to 296 aviation safety investigation reports. The results suggested that pilots controlled only three-quarters of the occurrences, more than three-thirds of the controlled cases regarded fairly unfamiliar situations, and the flight crews succeeded to mitigate the possible negative consequences of events in about 71% of the cases. Further statistical tests showed that the controllability-related characteristics of events had not significantly changed over time, and they varied across regions, aircraft, operational and event characteristics, as well as when fatigue had contributed to the occurrences. Overall, the findings demonstrated the value of using the controllability classification before considering the actual outcomes of events as means to support the identification of system resilience and successes. The classification can also be embedded in voluntary reporting systems to allow end-users to express the degree of each of the controllability characteristics so that management can monitor them over time and perform internal and external benchmarking. The mandatory reports concerned, the classification could function as a decision-making parameter for prioritising incident investigations.
DOCUMENT
Athlete impairment level is an important factor in wheelchair mobility performance (WMP) in sports. Classification systems, aimed to compensate impairment level effects on performance, vary between sports. Improved understanding of resemblances and differences in WMP between sports could aid in optimizing the classification methodology. Furthermore, increased performance insight could be applied in training and wheelchair optimization. The wearable sensor-based wheelchair mobility performance monitor (WMPM) was used to measure WMP of wheelchair basketball, rugby and tennis athletes of (inter-)national level during match-play. As hypothesized, wheelchair basketball athletes show the highest average WMP levels and wheelchair rugby the lowest, whereas wheelchair tennis athletes range in between for most outcomes. Based on WMP profiles, wheelchair basketball requires the highest performance intensity, whereas in wheelchair tennis, maneuverability is the key performance factor. In wheelchair rugby, WMP levels show the highest variation comparable to the high variation in athletes’ impairment levels. These insights could be used to direct classification and training guidelines, with more emphasis on intensity for wheelchair basketball, focus on maneuverability for wheelchair tennis and impairment-level based training programs for wheelchair rugby. Wearable technology use seems a prerequisite for further development of wheelchair sports, on the sports level (classification) and on individual level (training and wheelchair configuration).
DOCUMENT
Office well-being aims to explore and support a healthy, balanced and active work style in office environments. Recent work on tangible user interfaces has started to explore the role of physical, tangible interfaces as active interventions to explore how to tackle problems such as inactive work and lifestyles, and increasingly sedentary behaviours. We identify a fragmented research landscape on tangible Office well-being interventions, missing the relationship between interventions, data, design strategies, and outcomes, and behaviour change techniques. Based on the analysis of 40 papers, we identify 7 classifications in tangible Office well-being interventions and analyse the intervention based on their role and foundation in behaviour change. Based on the analysis, we present design considerations for the development of future tangible Office well-being design interventions and present an overview of the current field and future research into tangible Office well-being interventions to design for a healthier and active office environment.
DOCUMENT
Cervical spinal manipulations (CSM) are frequently employed techniques to alleviate neck pain and headache. Minor and major complications following CSM have been described, though clear consensus on definition and the classification of the complications had not yet been achieved. As a result, incidence rates may be underestimated. The aim of this study was to develop a consensus-based classification of adverse events following cervical spinal manipulations which has good feasibility in clinical practice and research. Design: A three round Delphi-study. Medical specialists, manual therapists, and patients (n=30) participated in an online survey. In Round 1, participants were invited to select a classification system of adverse events. Potential complications were inventoried and detailed in accordance with the ICF and the ICD-10. In Round 2, panel members categorized the potential complications in their selected classification. During the third round, it was inquired of the participants whether they concurred with the answer of the majority of participants. Results: Thirty four complications were defined. Consensus was achieved for 29 complications for all durations [hours, days, weeks]. For the remaining five complications, consensus was reached for two of the three durations [hours, days, weeks]. Conclusions: A consensus-based classification system of adverse events after cervical spinal manipulation was developed which comprises patients’ and clinicians’ perspectives and has only a small number of categories. The classification system includes a precise description of potential adverse events and is based on international accepted classifications (ICD-10 and ICF). This classification system may be useful for utilization in both clinical practice and research.
DOCUMENT
Purpose: Classification is a defining factor for competition in wheelchair sports, but it is a delicate and time-consuming process with often questionable validity. New inertial sensor-based measurement methods applied in match play and field tests allow for more precise and objective estimates of the impairment effect on wheelchair-mobility performance. The aim of the present research was to evaluate whether these measures could offer an alternative point of view for classification. Methods: Six standard wheelchair-mobility performance outcomes of different classification groups were measured in match play (n = 29), as well as best possible performance in a field test (n = 47). Results: In match results, a clear relationship between classification and performance level is shown, with increased performance outcomes in each adjacent higher-classification group. Three outcomes differed significantly between the low- and mid-classified groups, and 1, between the mid- and high-classified groups. In best performance (field test), there was a split between the low- and mid-classified groups (5 out of 6 outcomes differed significantly) but hardly any difference between the mid- and high-classified groups. This observed split was confirmed by cluster analysis, revealing the existence of only 2 performance-based clusters. Conclusions: The use of inertial sensor technology to obtain objective measures of wheelchair-mobility performance, combined with a standardized field test, produced alternative views for evidence-based classification. The results of this approach provide arguments for a reduced number of classes in wheelchair basketball. Future use of inertial sensors in match play and field testing could enhance evaluation of classification guidelines, as well as individual athlete performance. DOI: https://doi.org/10.1123/ijspp.2017-0326 LinkedIn: https://www.linkedin.com/in/rienkvdslikke/ https://www.linkedin.com/in/moniqueberger/ https://www.linkedin.com/in/annemarie-de-witte-9582b154/
MULTIFILE
This paper focuses on the topical and problematic area of social innovations. The aim of this paper is to develop an original approach to the allocation of social innovations, taking into account characteristics such as the degree of state participation, the scope of application, the type of initiations as well as the degree of novelty, which will be elaborated on further in this article. In order to achieve this goal, the forty-two most successful social innovations were identified and systematized. The results of this study demonstrated that 73.5% of social innovations are privately funded, most of them operating on an international level with a high degree of novelty. Moreover, 81% of all social innovations are civic initiatives. Social innovations play an important role in the growth of both developed and less developed countries alike as highlighted in our extensive analysis
DOCUMENT
Author supplied Business rules play a critical role in an organization’s daily activities. With the increased use of business rules (solutions) the interest in modelling guidelines that address the manageability of business rules has increased as well. However, current research on modelling guidelines is mainly based on a theoretical view of modifications that can occur to a business rule set. Research on actual modifications that occur in practice is limited. The goal of this study is to identify modifications that can occur to a business rule set and underlying business rules. To accomplish this goal we conducted a grounded theory study on 229 rules set, as applied from March 2006 till June 2014, by the National Health Service. In total 3495 modifications have been analysed from which we defined eleven modification categories that can occur to a business rule set. The classification provides a framework for the analysis and design of business rules management architectures.
DOCUMENT
The Heating Ventilation and Air Conditioning (HVAC) sector is responsible for a large part of the total worldwide energy consumption, a significant part of which is caused by incorrect operation of controls and maintenance. HVAC systems are becoming increasingly complex, especially due to multi-commodity energy sources, and as a result, the chance of failures in systems and controls will increase. Therefore, systems that diagnose energy performance are of paramount importance. However, despite much research on Fault Detection and Diagnosis (FDD) methods for HVAC systems, they are rarely applied. One major reason is that proposed methods are different from the approaches taken by HVAC designers who employ process and instrumentation diagrams (P&IDs). This led to the following main research question: Which FDD architecture is suitable for HVAC systems in general to support the set up and implementation of FDD methods, including energy performance diagnosis? First, an energy performance FDD architecture based on information embedded in P&IDs was elaborated. The new FDD method, called the 4S3F method, combines systems theory with data analysis. In the 4S3F method, the detection and diagnosis phases are separated. The symptoms and faults are classified into 4 types of symptoms (deviations from balance equations, operating states (OS) and energy performance (EP), and additional information) and 3 types of faults (component, control and model faults). Second, the 4S3F method has been tested in four case studies. In the first case study, the symptom detection part was tested using historical Building Management System (BMS) data for a whole year: the combined heat and power plant of the THUAS (The Hague University of Applied Sciences) building in Delft, including an aquifer thermal energy storage (ATES) system, a heat pump, a gas boiler and hot and cold water hydronic systems. This case study showed that balance, EP and OS symptoms can be extracted from the P&ID and the presence of symptoms detected. In the second case study, a proof of principle of the fault diagnosis part of the 4S3F method was successfully performed on the same HVAC system extracting possible component and control faults from the P&ID. A Bayesian Network diagnostic, which mimics the way of diagnosis by HVAC engineers, was applied to identify the probability of all possible faults by interpreting the symptoms. The diagnostic Bayesian network (DBN) was set up in accordance with the P&ID, i.e., with the same structure. Energy savings from fault corrections were estimated to be up to 25% of the primary energy consumption, while the HVAC system was initially considered to have an excellent performance. In the third case study, a demand-driven ventilation system (DCV) was analysed. The analysis showed that the 4S3F method works also to identify faults on an air ventilation system.
DOCUMENT
