Within the Flexnode Plus project the long-term degradation characteristics of a proton exchange membrane (PEM) electrolyzer (5.5 kW, AC, 1 Nm3/h H2) and fuel cell (1.0 kW, DC, 0.9 Nm3/h) was experimentally tested. The electrolyzer unit was operated at various loads and pressures for approximately 750 hours in total, while the fuel cell was operated at a constant load of 1 Ω resistance for approximately 1120 hours in total. The efficiency of the hydrogen production in the electrolyzer and the electricity production in the fuel cell was expressed using the hourly average system efficiency and average cell efficiency. Inorder to predict the state of health and remaining lifetime of the electrolyzer cell and fuel cell, the decay of the cell voltage over time was monitored and the direct mapping from aging data method was used.The electrolyzer cell showed a stable cell voltage and cell efficiency in the studied time period, with an average cell voltage decay rate of 0.5 μV/h. The average cell voltage of the fuel cell dropped with a rate of 2 μV/h during the studied time period.
The Bio-P2G-program (Bio-Power to Gas) at the Hanze University of AppliedSciences evaluates the technologic feasibility of the biological reduction of carbondioxide with hydrogen to methane (biomethanation: 1 CO2 + 4 H2 -> CH4 + 2 H2O)Chemically, this process is known as the Sabatier reaction, but within anaerobicdigestion the biological methanation is catalyzed by a specific group ofmicroorganisms: the hydrogenotrophic methanogens.
Decentralised renewable energy production in the form of fuels or electricity can have large scale deployment in future energy systems, but the feasibility needs to be assessed. The novelty of this paper is in the design and implementation of a mixed integer linear programming optimisation model to minimise the net present cost of decentralised hydrogen production for different energy demands on neighbourhood urban scale, while simultaneously adhering to European Union targets on greenhouse gas emission reductions. The energy system configurations optimised were assumed to possibly consist of a variable number or size of wind turbines, solar photovoltaics, grey grid electricity usage, battery storage, electrolyser, and hydrogen storage. The demands served are hydrogen for heating and mobility, and electricity for the households. A hydrogen residential heating project currently being developed in Hoogeveen, The Netherlands, served as a case study. Six scenarios were compared, each taking one or multiple energy demand services into question. For each scenario the levelised cost of hydrogen was calculated. The lowest levelised cost of hydrogen was found for the combined heating and mobility scenario: 8.36 €/kg for heating and 9.83 €/kg for mobility. The results support potential cost reductions of combined demand patterns of different energy services. A sensitivity analysis showed a strong influence of electrolyser efficiency, wind turbine parameters, and emission reduction factor on levelised cost. Wind energy was strongly preferred because of the lower cost and the low greenhouse gas emissions, compared to solar photovoltaics and grid electricity. Increasing electrolyser efficiency and greenhouse gas emission reduction of the used technologies deserve further research.
The growing energy demand and environmental impact of traditional sources highlight the need for sustainable solutions. Hydrogen produced through water electrolysis, is a flexible and clean energy carrier capable of addressing large-electricity storage needs of the renewable but intermittent energy sources. Among various technologies, Proton Exchange Membrane Water Electrolysis (PEMWE) stands out for its efficiency and rapid response, making it ideal for grid stabilization. In its core, PEMWEs are composed of membrane electrode assemblies (MEA), which consist of a proton-conducting membrane sandwiched between two catalyst-coated electrodes, forming a single PEMWE cell unit. Despite the high efficiency and low emissions, a principal drawback of PEMWE is the capital cost due to high loading of precious metal catalysts and protective coatings. Traditional MEA catalyst coating methods are complex, inefficient, and costly to scale. To circumvent these challenges, VSParticle developed a technology for nanoparticle film production using spark ablation, which generates nanoparticles through high-voltage discharges between electrodes followed by an impaction printing module. However, the absence of liquids poses challenges, such as integrating polymeric solutions (e.g., Nafion®) for uniform, thicker catalyst coatings. Electrohydrodynamic atomization (EHDA) stands out as a promising technique thanks to its strong electric fields used to generate micro- and nanometric droplets with a narrow size distribution. Co-axial EHDA, a variation of this technique, utilizes two concentric needles to spray different fluids simultaneously.The ESPRESSO-NANO project combines co-axial EHDA with spark ablation to improve catalyst uniformity and performance at the nanometer scale by integrating electrosprayed ionomer nanoparticles with dry metal nanoparticles, ensuring better distribution of the catalyst within the nanoporous layer. This novel approach streamlines numerous steps in traditional synthesis and electrocatalyst film production which will address material waste and energy consumption, while simultaneously improve the electrochemical efficiency of PEMWEs, offering a sustainable solution to the global energy crisis.
The consistent demand for improving products working in a real-time environment is increasing, given the rise in system complexity and urge to constantly optimize the system. One such problem faced by the component supplier is to ensure their product viability under various conditions. Suppliers are at times dependent on the client’s hardware to perform full system level testing and verify own product behaviour under real circumstances. This slows down the development cycle due to dependency on client’s hardware, complexity and safety risks involved with real hardware. Moreover, in the expanding market serving multiple clients with different requirements can be challenging. This is also one of the challenges faced by HyMove, who are the manufacturer of Hydrogen fuel cells module (https://www.hymove.nl/). To match this expectation, it starts with understanding the component behaviour. Hardware in the loop (HIL) is a technique used in development and testing of the real-time systems across various engineering domain. It is a virtual simulation testing method, where a virtual simulation environment, that mimics real-world scenarios, around the physical hardware component is created, allowing for a detailed evaluation of the system’s behaviour. These methods play a vital role in assessing the functionality, robustness and reliability of systems before their deployment. Testing in a controlled environment helps understand system’s behaviour, identify potential issues, reduce risk, refine controls and accelerate the development cycle. The goal is to incorporate the fuel cell system in HIL environment to understand it’s potential in various real-time scenarios for hybrid drivelines and suggest secondary power source sizing, to consolidate appropriate hybridization ratio, along with optimizing the driveline controls. As this is a concept with wider application, this proposal is seen as the starting point for more follow-up research. To this end, a student project is already carried out on steering column as HIL
The World Health Organization has pinpointed antimicrobial resistance (AMR) of increasing global concern, causing increased healthcare costs and threatening human health. Although AMR is a naturally occurring process, it is accelerated by misuse/overuse of antibiotics. Additionally, the development and production of antibiotics is becoming increasingly challenging and costly. These challenges underline the high demand for alternative microbial inhibitors (e.g. antibiotics) and their development. The chemical compound Allicin has been studied for its potential health benefits, including antimicrobial properties[1,2] and potential cardiovascular benefits[3]. It has been suggested that the antimicrobial effect of Allicin could be achieved indirectly by the imprint it leaves in surrounding water molecules, i.e. its hydration shell. Such imprints are known as time-crystals and possess unique properties. Since often biochemical reactions occur via water molecules and their hydrogen bonds, it is possible that a time-crystal imprint of a substance in water might have a similar effect as the substance itself, e.g. antimicrobial inhibition. A consortium of universities, knowledge institutes and companies was formed to test this hypothesis based on the antibacterial properties of Allicin, resulting in the project HyTimeCIA. The experiments involve attaching allicin onto a polymer surface (i.e. hybridization), thereby providing antibacterial properties. This surface is then exposed to bacteria to test the antimicrobial properties of the allicin/polymer surface. If proven feasible, HyTimeCIA could provide a novel alternative microbial inhibitor fixated to a surface, allowing for localized application of antibacterial effects and potentially reducing the requirement of antibiotics. This not only mitigates AMR, but also facilitates production of microbial inhibitors that are particularly difficult or expensive. From the partners perspective, HyTimeCIA provides opportunities for chemical-free alternative antimicrobial (water)treatment technology and gained knowledge on alternative microbial inhibitors, both aspects which are highly in demand due to AMR and antibiotic production challenges.
