An important consideration for future age-friendly cities is that older people are able to live in housing appropriate for their needs. While thermal comfort in the home is vital for the health and well-being of older people, there are currently few guidelines about how to achieve this. This study is part of a research project that aims to improve the thermal environment of housing for older Australians by investigating the thermal comfort of older people living independently in South Australia and developing thermal comfort guidelines for people ageing-in-place. This paper describes the approach fundamental for developing the guidelines, using data from the study participants’ and the concept of personas to develop a number of discrete “thermal personalities”. Hierarchical Cluster Analysis (HCA) was implemented to analyse the features of research participants, resulting in six distinct clusters. Quantitative and qualitative data from earlier stages of the project were then used to develop the thermal personalities of each cluster. The thermal personalities represent di erent approaches to achieving thermal comfort, taking into account a wide range of factors including personal characteristics, ideas, beliefs and knowledge, house type, and location. Basing the guidelines on thermal personalities highlights the heterogeneity of older people and the context-dependent nature of thermal comfort in the home and will make the guidelines more user-friendly and useful. Original publication at MDPI: https://doi.org/10.3390/ijerph17228402 © 2020 by the authors. Licensee MDPI.
MULTIFILE
In indoor comfort research, thermal comfort of care-professionals in hospital environment is a little explored topic. To address this gap, a mixed methods study, with the nursing staff in hospital wards acting as participants,was undertaken. Responses were collected during three weeks in the summer (n = 89), and four weeks in the autumn (n = 43). Analysis of the subjective feedback from nurses and the measured indoor thermal conditions revealed that the existent thermal conditions (varying between 20 and 25 °C) caused a slightly warm thermal sensation on the ASHRAE seven point scale. This led to a slightly unacceptable thermal comfort and a slightly obstructed self-appraised work performance. The results also indicated that the optimal thermal sensation for the nurses—suiting their thermal comfort requirements and work performance—would be closer to‘slightly cool’than neutral. Using a design approach of dividing the hospital ward into separate thermal zones, with different set-points for respectively patient and care-professionals’comfort, would seem to be the ideal solution that contributes positively to the work environment and, at the same time, creates avenues for energy conservation.
DOCUMENT
Thermal comfort is determined by the combined effect of the six thermal comfort parameters: temperature, air moisture content, thermal radiation, air relative velocity, personal activity and clothing level as formulated by Fanger through his double heat balance equations. In conventional air conditioning systems, air temperature is the parameter that is normally controlled whilst others are assumed to have values within the specified ranges at the design stage. In Fanger’s double heat balance equation, thermal radiation factor appears as the mean radiant temperature (MRT), however, its impact on thermal comfort is often ignored. This paper discusses the impacts of the thermal radiation field which takes the forms of mean radiant temperature and radiation asymmetry on thermal comfort, building energy consumption and air-conditioning control. Several conditions and applications in which the effects of mean radiant temperature and radiation asymmetry cannot be ignored are discussed. Several misinterpretations that arise from the formula relating mean radiant temperature and the operative temperature are highlighted, coupled with a discussion on the lack of reliable and affordable devices that measure this parameter. The usefulness of the concept of the operative temperature as a measure of combined effect of mean radiant and air temperatures on occupant’s thermal comfort is critically questioned, especially in relation to the control strategy based on this derived parameter. Examples of systems which deliver comfort using thermal radiation are presented. Finally, the paper presents various options that need to be considered in the efforts to mitigate the impacts of the thermal radiant field on the occupants’ thermal comfort and building energy consumption.
DOCUMENT
Eggshell particles as bio-ceramic in sustainable bioplastic engineering – ESP-BIOPACK Plastics make our lives easier in many ways. However, if they are not properly disposed of, they end up in the environment. Recently, biodegradable biopolymers, such as polylactic acid (PLA) and polyhydroxy alkanoates (PHAs), have moved towards alternatives for applications such as sustainable packaging. The major limitations of these biopolymers are the high cost, which is due to the high cost of the starting materials and the small volumes, and the poor thermal and mechanical properties such as limited processability and low impact resistance. Attempts to modify PHAs have been researched in many ways, such as blending various biodegradable polymers or mixing inorganic mineral fillers. Eggshell (10 million tons per year by 2030) is a natural bio-ceramic mineral with a unique chemical composition of calcium carbonate (>95% calcite). So far it has been regarded as a zero-value waste product, but it could be a great opportunity as raw material to reduce the cost of biopolymers and to improve properties, including the decomposition process at the end-of-life. In this project, we aim to develop eggshell particles that serve as bio-fillers in biopolymers to lower the cost of the product, to improve mechanical properties and to facilitate the validation of end-of-life routes, therefore, economically enhance the wide applications of such. The developed bioplastic packaging materials will be applied in SME partner EGGXPERT’s cosmetics line but also in other packaging applications, such as e.g. biodegradable coffee capsules. To be able to realize the proposed idea, the partnership between Chemelot Innovation and Learning Labs (CHILL), EGGXPERT B.V. and the Research Centre Material Sciences of Zuyd University of Applied Sciences is needed to research the physical, mechanical and end-of-life influences of eggshell particles (ESP) in biopolymers such as PLA and PHA and optimize their performance.
The Netherlands must build one million homes and retrofit eight million buildings by 2030, while halving CO₂ emissions and achieving a circular economy by 2050. This demands a shift from high-carbon materials like concrete—responsible for 8% of global CO₂ emissions—and imported timber, which inflates supply-chain emissions. Mycelium offers a regenerative, biodegradable alternative with carbon-sequestration potential and minimal energy input. Though typically used for insulation, it shows structural promise—achieving compressive strengths of 5.7 MPa and thermal conductivities of 0.03–0.05 W/(m·K). Hemp and other lignocellulosic agricultural byproducts are commonly used as substrates for mycelium composites due to their fibrous structure and availability. However, hemp (for e.g.) requires 300–500 mm of water per cycle and centralized processing, limiting its circularity in urban or resource-scarce areas. Aligned with the CLICKNL Design Power Agenda, this project explores material-driven design innovation through a load-bearing mycelium-based architectural product system, advancing circular, locally embedded construction. To reduce environmental impact, we will develop composites using regional bio-waste—viz. alienated vegetation, food waste, agriculture and port byproducts—eliminating the need for water-intensive hemp cultivation. Edible fungi like Pleurotus ostreatus (oyster mushroom) will enable dual-function systems that yield food and building material. Design is key for moving beyond a singular block to a full product system: a cluster of modular units emphasizing geometry, interconnectivity, and compatibility with other building layers. Aesthetic variation (dimension, color, texture) supports adaptable, expressive architecture. We will further assess lifecycle performance, end-of-(service)-life scenarios, and on-site fabrication potential. A 1:1 prototype at The Green Village will serve as a demonstrator, accelerating stakeholder engagement and upscaling. By contributing to the KIA mission on Social Desirability, we aim to shift paradigms—reimagining how we build, live, grow, and connect through circular architecture.
The drive to reduce the carbon intensity of the energy system has generated much interest in applying carbon-free fuels such as ammonia (NH3) in combustion systems. The high hydrogen density and well-established production processes make NH3 a valuable chemical energy carrier to address and sustain the energy shift toward renewable energy source integration. However, some difficulties can be highlighted in the NH3 practical application. The combustion of NH3 is prone to producing harmful nitric oxides. In addition, NH3 has lower reactivity than most hydrocarbon fuels, which makes ignition challenging. Also, admixing NH3 with highly reactive fuels such as DME will facilitate ignition. The partnerships of this proposal are very interested in applying renewable NH3 as fuel in combined heat and power engines, and this research proposal suggests simulating a dual-fuel engine with NH3 as its primary fuel. The results of this research will help determine the optimum operating conditions for performing an experimental study.
