An important consideration for future age-friendly cities is that older people are able to live in housing appropriate for their needs. While thermal comfort in the home is vital for the health and well-being of older people, there are currently few guidelines about how to achieve this. This study is part of a research project that aims to improve the thermal environment of housing for older Australians by investigating the thermal comfort of older people living independently in South Australia and developing thermal comfort guidelines for people ageing-in-place. This paper describes the approach fundamental for developing the guidelines, using data from the study participants’ and the concept of personas to develop a number of discrete “thermal personalities”. Hierarchical Cluster Analysis (HCA) was implemented to analyse the features of research participants, resulting in six distinct clusters. Quantitative and qualitative data from earlier stages of the project were then used to develop the thermal personalities of each cluster. The thermal personalities represent di erent approaches to achieving thermal comfort, taking into account a wide range of factors including personal characteristics, ideas, beliefs and knowledge, house type, and location. Basing the guidelines on thermal personalities highlights the heterogeneity of older people and the context-dependent nature of thermal comfort in the home and will make the guidelines more user-friendly and useful. Original publication at MDPI: https://doi.org/10.3390/ijerph17228402 © 2020 by the authors. Licensee MDPI.
MULTIFILE
Thermal comfort is determined by the combined effect of the six thermal comfort parameters: temperature, air moisture content, thermal radiation, air relative velocity, personal activity and clothing level as formulated by Fanger through his double heat balance equations. In conventional air conditioning systems, air temperature is the parameter that is normally controlled whilst others are assumed to have values within the specified ranges at the design stage. In Fanger’s double heat balance equation, thermal radiation factor appears as the mean radiant temperature (MRT), however, its impact on thermal comfort is often ignored. This paper discusses the impacts of the thermal radiation field which takes the forms of mean radiant temperature and radiation asymmetry on thermal comfort, building energy consumption and air-conditioning control. Several conditions and applications in which the effects of mean radiant temperature and radiation asymmetry cannot be ignored are discussed. Several misinterpretations that arise from the formula relating mean radiant temperature and the operative temperature are highlighted, coupled with a discussion on the lack of reliable and affordable devices that measure this parameter. The usefulness of the concept of the operative temperature as a measure of combined effect of mean radiant and air temperatures on occupant’s thermal comfort is critically questioned, especially in relation to the control strategy based on this derived parameter. Examples of systems which deliver comfort using thermal radiation are presented. Finally, the paper presents various options that need to be considered in the efforts to mitigate the impacts of the thermal radiant field on the occupants’ thermal comfort and building energy consumption.
DOCUMENT
The thermal walk investigates the influence of urban design on the thermal experience of pedestrians moving through a certain urban area. Thermal walks are often used by scientists to understand how residents experience heat in urban environments. However, thermal walks can also be beneficial to urban professionals working at local governments that need to adapt urban areas to rising temperatures. Thermal walks can answer their questions such as: How hot is a shopping street, a residential area, a specific walking route through the city or a station area? Which adjustments are needed to create cool spaces? Which factors determine whether the outdoor space is hot or cool and which of these factors can be included in a heat-resilient design? A thermal walk reveals and lets participants experience which urban designs are hottest, coolest or most pleasant, and which factors play a role. Therefore, thermal walks can help urban professionals by:• Mapping the heat resilience of a specific area and understanding which adjustments can help to create cooler areas; and• Teaching them the phenomenon of urban heat and the factors that lead to a heat resilient design. On the 18th of June 2019, during the ‘We make the city’ festival, we used the thermal walk to investigate the heat resilience of the walking route on a former historic naval base in the city of Amsterdam, the Marineterrein. In addition, the thermal walk was accompanied by mini-lectures in order to teach the participants about the phenomenon of urban heat.
MULTIFILE
Electrohydrodynamic Atomization (EHDA), also known as Electrospray (ES), is a technology which uses strong electric fields to manipulate liquid atomization. Among many other areas, electrospray is currently used as an important tool for biomedical applications (droplet encapsulation), water technology (thermal desalination and metal recovery) and material sciences (nanofibers and nano spheres fabrication, metal recovery, selective membranes and batteries). A complete review about the particularities of this technology and its applications was recently published in a special edition of the Journal of Aerosol Sciences [1]. Even though EHDA is already applied in many different industrial processes, there are not many controlling tools commercially available which can be used to remotely operate the system as well as identify some spray characteristics, e.g. droplet size, operational mode, droplet production ratio. The AECTion project proposes the development of an innovative controlling system based on the electrospray current, signal processing & control and artificial intelligence to build a non-visual tool to control and characterize EHDA processes.
The postdoc candidate, Giuliana Scuderi, will strengthen the connection between the research group Biobased Buildings (BB), (collaboration between Avans University of Applied Sciences and HZ University of Applied Sciences (HZ), and the Civil Engineering bachelor programme (CE) of HZ. The proposed research aims at deepening the knowledge about the mechanical properties of biobased materials for the application in the structural and infrastructural sectors. The research is relevant for the professional field, which is looking for safe and sustainable alternatives to traditional building materials (such as lignin asphalt, biobased panels for bridge constructions, etc.). The study of the mechanical behaviour of traditional materials (such as concrete and steel) is already part of the CE curriculum, but the ambition of this postdoc is that also BB principles are applied and visible. Therefore, from the first year of the programme, the postdoc will develop a biobased material science line and will facilitate applied research experiences for students, in collaboration with engineering and architectural companies, material producers and governmental bodies. Consequently, a new generation of environmentally sensitive civil engineers could be trained, as the labour market requires. The subject is broad and relevant for the future of our built environment, with possible connections with other fields of study, such as Architecture, Engineering, Economics and Chemistry. The project is also relevant for the National Science Agenda (NWA), being a crossover between the routes “Materialen – Made in Holland” and “Circulaire economie en grondstoffenefficiëntie”. The final products will be ready-to-use guidelines for the applications of biobased materials, a portfolio of applications and examples, and a new continuous learning line about biobased material science within the CE curriculum. The postdoc will be mentored and supervised by the Lector of the research group and by the study programme coordinator. The personnel policy and job function series of HZ facilitates the development opportunity.
Eggshell particles as bio-ceramic in sustainable bioplastic engineering – ESP-BIOPACK Plastics make our lives easier in many ways. However, if they are not properly disposed of, they end up in the environment. Recently, biodegradable biopolymers, such as polylactic acid (PLA) and polyhydroxy alkanoates (PHAs), have moved towards alternatives for applications such as sustainable packaging. The major limitations of these biopolymers are the high cost, which is due to the high cost of the starting materials and the small volumes, and the poor thermal and mechanical properties such as limited processability and low impact resistance. Attempts to modify PHAs have been researched in many ways, such as blending various biodegradable polymers or mixing inorganic mineral fillers. Eggshell (10 million tons per year by 2030) is a natural bio-ceramic mineral with a unique chemical composition of calcium carbonate (>95% calcite). So far it has been regarded as a zero-value waste product, but it could be a great opportunity as raw material to reduce the cost of biopolymers and to improve properties, including the decomposition process at the end-of-life. In this project, we aim to develop eggshell particles that serve as bio-fillers in biopolymers to lower the cost of the product, to improve mechanical properties and to facilitate the validation of end-of-life routes, therefore, economically enhance the wide applications of such. The developed bioplastic packaging materials will be applied in SME partner EGGXPERT’s cosmetics line but also in other packaging applications, such as e.g. biodegradable coffee capsules. To be able to realize the proposed idea, the partnership between Chemelot Innovation and Learning Labs (CHILL), EGGXPERT B.V. and the Research Centre Material Sciences of Zuyd University of Applied Sciences is needed to research the physical, mechanical and end-of-life influences of eggshell particles (ESP) in biopolymers such as PLA and PHA and optimize their performance.
