Powerful Ageing is a power training intervention offered by Dutch municipalities to improve the physical functioning of its older residents, thereby reducing their reliance on assistive living devices and social support services. This study aimed to investigate the effects of Powerful Ageing on muscle power, physical performance, and physical functioning in older adults immediately following the intervention and at 1-year follow-up. The study design was a prospective longitudinal case series. Eligible older adults requesting social support services from their municipality participated in a 14-week power training intervention. Primary outcomes were categorized according to ICF health domains: within the function domain, muscle power was measured with a Power Squat Test and a Lifting Test; within the activities domain, physical performance was assessed using the Star Agility Run and Timed Up-and-Go Test; and within the participation domain, physical functioning was assessed using a patient-specific complaints questionnaire. Participant motivation, a secondary outcome, was assessed using a short questionnaire.
MULTIFILE
With the effects of climate change linked to the use of fossil fuels, as well as the prospect of their eventual depletion, becoming more noticeable, political establishment and society appear ready to switch towards using renewable energy. Solar power and wind power are considered to be the most significant source of global low-carbon energy supply. Wind energy continues to expand as it becomes cheaper and more technologically advanced. Yet, despite these expectations and developments, fossil fuels still comprise nine-tenths of the global commercial energy supply. In this article, the history, technology, and politics involved in the production and barriers to acceptance of wind energy will be explored. The central question is why, despite the problems associated with the use of fossil fuels, carbon dependency has not yet given way to the more ecologically benign forms of energy. Having briefly surveyed some literature on the role of political and corporate stakeholders, as well as theories relating to sociological and psychological factors responsible for the grassroots’ resistance (“not in my backyard” or NIMBYs) to renewable energy, the findings indicate that motivation for opposition to wind power varies. While the grassroots resistance is often fueled by the mistrust of the government, the governments’ reason for resisting renewable energy can be explained by their history of a close relationship with the industrial partners. This article develops an argument that understanding of various motivations for resistance at different stakeholder levels opens up space for better strategies for a successful energy transition. https://doi.org/10.30560/sdr.v1n1p11 LinkedIn: https://www.linkedin.com/in/helenkopnina/
MULTIFILE
A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and technological elements of systems. Human factors topics and indicative models, tools and methods were reviewed against the approach of STAMP. The results showed that STAMP engulfs many human factors subjects, is more descriptive than human factors models and tools, provides analytical power, and might be further improved by including more aspects of human factors. STAMP can serve in minimizing the gap between human factors and safety engineering sciences, which can collectively offer inclusive solutions to the industry.
DOCUMENT
Research suggests that muscle power is a more critical determinant of physical functioning in older adults than muscle strength. The objective of this study was to systematically review the literature on the effect of power training compared to strength training in older adults on tests for muscle power, two groups of activity-based tests under controlled conditions: generic tests and tests with an emphasis on movement speed, and finally, physical activity level in daily life. A systematic search for randomized controlled trials comparing effects of power training to strength training in older adults was performed in PubMed, Embase, Ebsco/CINAHL, Ebsco/SPORTDiscus, Wiley/Cochrane Library and Scopus. Risk of bias was assessed using the Cochrane Collaboration Tool, and quality of evidence was evaluated using GRADEpro Guideline Development Tool. Standardized mean differences (SMD) and 95% confidence intervals (CI) were calculated for outcomes separately using a random effects model.
MULTIFILE
Previous research shows that power training can increase power output in older adults and may also improve physical performance, physical functioning, and independence. However, power training interventions have not been optimized for older adults. The aim of this study was to assess the feasibility and preliminary effectiveness of a power training program called Powerful Ageing in older adults. A total of 28 older adults participated in a 12-week power training intervention at an intensity of 20-30% 1RM. The primary outcome, feasibility, was assessed through intervention retention, adherence (attendance and compliance), and safety. Secondary outcomes were measured in health domains of the ICF. In the function domain, muscle power and anaerobic power were assessed using a weighted squat and Wingate test, respectively. In the activities domain, physical performance was measured using the 6-minute walk test, and in the participation domain, physical activity in daily life and health status were evaluated using an accelerometer and the SF-36 questionnaire, respectively.
MULTIFILE
In wheelchair sports, there is an increasing need to monitor mechanical power in the field. When rolling resistance is known, inertial measurement units (IMUs) can be used to determine mechanical power. However, upper body (i.e., trunk) motion affects the mass distribution between the small front and large rear wheels, thus affecting rolling resistance. Therefore, drag tests – which are commonly used to estimate rolling resistance – may not be valid. The aim of this study was to investigate the influence of trunk motion on mechanical power estimates in hand-rim wheelchair propulsion by comparing instantaneous resistance-based power loss with drag test-based power loss. Experiments were performed with no, moderate and full trunk motion during wheelchair propulsion. During these experiments, power loss was determined based on 1) the instantaneous rolling resistance and 2) based on the rolling resistance determined from drag tests (thus neglecting the effects of trunk motion). Results showed that power loss values of the two methods were similar when no trunk motion was present (mean difference [MD] of 0.6 1.6 %). However, drag test-based power loss was underestimated up to −3.3 2.3 % MD when the extent of trunk motion increased (r = 0.85). To conclude, during wheelchair propulsion with active trunk motion, neglecting the effects of trunk motion leads to an underestimated mechanical power of 1 to 6 % when it is estimated with drag test values. Depending on the required accuracy and the amount of trunk motion in the target group, the influence of trunk motion on power estimates should be corrected for.
DOCUMENT
An important performance determinant in wheelchair sports is the power exchanged between the athletewheelchair combination and the environment, in short, mechanical power. Inertial measurement units (IMUs) might be used to estimate the exchanged mechanical power during wheelchair sports practice. However, to validly apply IMUs for mechanical power assessment in wheelchair sports, a well-founded and unambiguous theoretical framework is required that follows the dynamics of manual wheelchair propulsion. Therefore, this research has two goals. First, to present a theoretical framework that supports the use of IMUs to estimate power output via power balance equations. Second, to demonstrate the use of the IMU-based power estimates during wheelchair propulsion based on experimental data. Mechanical power during straight-line wheelchair propulsion on a treadmill was estimated using a wheel mounted IMU and was subsequently compared to optical motion capture data serving as a reference. IMU-based power was calculated from rolling resistance (estimated from drag tests) and change in kinetic energy (estimated using wheelchair velocity and wheelchair acceleration). The results reveal no significant difference between reference power values and the proposed IMU-based power (1.8% mean difference, N.S.). As the estimated rolling resistance shows a 0.9–1.7% underestimation, over time, IMU-based power will be slightly underestimated as well. To conclude, the theoretical framework and the resulting IMU model seems to provide acceptable estimates of mechanical power during straight-line wheelchair propulsion in wheelchair (sports) practice, and it is an important first step towards feasible power estimations in all wheelchair sports situations.
DOCUMENT
A major challenge for disaster scholars and policymakers is to understand the power dimension in response networks, particularly relating to collaboration and coordination. We propose a conceptual framework to study interests and negotiations in and between various civic and professional, response networks drawing on the concepts of “programming” and “switching” proposed by Manuel Castells in his work on the network society. Programming in disaster response refers to the ability to constitute response networks and to program/reprogram them in terms of the goals assigned to the network. Switching is the ability to connect different net-works by sharing common goals and combining resources. We employ these concepts to understand how the US Federal Emergency Management Agency organized its response in the aftermath of Hurricanes Katrina and Sandy. Our conceptual framework can be used both by disaster scholars and policymakers to understand how networked power is constructed and utilized.
DOCUMENT
The realization of human rights standards depends in part on the commitment of local actors. It can be argued that local public service professionals such as social workers can also be regarded as key players. The possible role of social workers becomes imperative if these professionals are working in a policy context that is not congruent with human rights. If existing laws or policies cause or maintain disrespect for human rights, social workers are in a position to observe that this is having an adverse impact on clients. When social workers are regarded as human rights actors, the question arises how they can or should respond to law and policy that impedes them in carrying out their work with respect for human rights. This article adds to existing theories on social workers as human rights actors by examining the practices of social professionals working in such a challenging policy context. The research took place among professionals in social district teams in the city of Utrecht, the Netherlands. Following a series of decentralizations and austerity measures the social care landscape in the Netherlands has changed drastically over the last few years. As a result, social workers may find themselves on the one hand trying to realize the best possible care for their clients while on the other hand dealing with new laws and policy expectations focused on self-reliance and diminished access to specialist care. The article explores how social professionals’ responses to barriers in access to care affect human rights requirements. In doing so, this socio-legal study provides insight into the ways in which everyday social work relates to the realization of human rights at the local level.
DOCUMENT
Droop control is used for power management in DC grids. Based on the level of the DC grid voltage, the amount of power regulated to or from the appliance is regulated such, that power management is possible. The Universal 4 Leg is a laboratory setup for studying the functionality of a grid manager for power management. It has four independent outputs that can be regulated with pulse width modulation to control the power flow between the DC grid and for example, a rechargeable battery, solar panel or any passive load like lighting or heating.
DOCUMENT
